LOOK Orka Smoke Machine with fan and FC for rent or hire

LOOK SOLUTION Art. no. 17474

ORKA Tourpack: Fog & Fan in a case

The Orka in a robust flight case offers additional advantages. The integrated, powerful fan increases the output range even more. The airflow can be deflected vertically through the air baffle.

The ORKA is currently the most powerful series-produced fog machine on the market. It can be used wherever enormous amounts of fog are needed in a very short time. Due to the enormous power and the wide fog output, very large halls and stadiums can be filled with fog. This makes the ORKA the perfect machine for large events, concerts, special effects, amusement parks, large studios, large discotheques, for fire brigade and disaster control exercises and much more.


Due to the robust housing and the compact design the machine is well suited for mobile use.

DMX 512 as standard: The ORKA can be controlled via DMX as standard. The connection is made via 5pin XLR cable. The DMX start address is set and stored via the membrane keyboard. It remains stored even if the unit is disconnected from the mains.

Analogue (0 - 10 V), the unit can be operated either from a console or optionally via XLR remote. Here the connections are plugged in via 3-pin XLR cable. A stand-alone operation is also possible. The amount of fog is adjusted directly at the unit. By briefly pressing the start button, the unit will start fogging automatically. A permanent pressing of the start-button is not necessary. With the integrated timer, fogging time in seconds, pause time in minutes and output quantity in % can be programmed exactly. The membrane keypad with illuminated numeric display and easily recognisable symbols allows uncomplicated operation through simple menu navigation. It also offers protection against soiling of the operating elements. Finest adjustment of the output quantity: digital technology enables fine adjustment of the pump. The output quantity can be adjusted in 1% steps from 0 - 99%. From the smallest fog cloud to dense continuous fog, any desired effect can be created without any problems. This allows the use in smaller locations as well as in halls.

An external fan with max. 800 Watt can be connected to the ORKA. This can be controlled via DMX 512. The unit then occupies two consecutive channels on the console.

Production and service in Germany

Technical data
Functional principle: Evaporator fog machine
Heat output: 9000 watts / 8000 watts (208 V)
Supply voltage: 3 x 230 V with neutral conductor, 50 Hz
Heating time: approx. 15 min.
Fluid consumption: at max. output: 500 ml/min. at continuous mist: 70 ml/min.
Fog output: adjustable in 99 steps
Output range: approx. 30 m
Fog time:
at max. output approx. 2 min
at < 40% output: continuous fog
Fan connection: max. 800 Watt
integrated capacitor
Air volume: adjustable in 99 steps
Control: DMX 512
0 - 10 V analog Stand alone radio remote control (option)
Temperature control
Microprocessor controlled via dual sensor
Overheating protection heating block/thermostat pump/temperature switch;
Dimensions (L x W x H): 55 x 37 x 28 cm
Weight without canister: approx. 30 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=178&productgroup=30&productgroupmain=10

Categories Lights (236)