LSC GenVI 12x16 A Dimmer, 63A for rent or hire

LSC Art. no. 20680

GenVI is the latest generation of dimmer packs from LSC.

Gone are the "good old days" when you had to carry power distributors, dimmer and switchpacks and hot patches to every event. GenVI combines all devices in a compact, modern 3 U housing and makes work easier, especially in the newly developing LED spotlight market.

The GenVI series uses a good old dimmer technology which is a little bit more expensive but can control almost any kind of load without stress. PTFD which stands for Pulse Transformer Fired Dimming, dims resistive and inductive loads, LEDs with minimal current consumption (and that without the parallel connection of several 100 W bulbs under the stage), mirror ball motors and much more. And since dimming is already done with 16-bit technology today, GenVi is also equipped with the corresponding software.

Behind the name TruePower there is another useful function. If, for example, daylight or UV spots are to be switched, each channel can be reconfigured separately as a true relay. This is not a switch curve emulated by the software but a real relay. By means of the Auto-Power function the relays configured as TruPower.

Yes, and GenVI is also ideal for use as a power distributor. Because - each channel can be configured very easily from the DMX patch. Once configured, this channel and all other channels are switched on one after the other as soon as the GenVI is supplied with power. To protect the twelve channels GenVI has combined RCBO's. These are combinations of residual current circuit breakers (RCBO) and 2-pole disconnecting circuit breakers. In the event of shutdown by a residual current - the so-called earth fault - not the entire dimmer pack fails, but only the affected channel. For the user, this feature means increased safety during the entire production process.

GenVI combines all the features you can expect from a current dimmer as well as power distribution and power-distro systems in one device. Thanks to per-channel configuration, GenVI offers absolute flexibility on every job.
>br> Features
12x 16 A combination circuit breakers (2 poles + FI)
16 bit DMX mode optional
Trupower (triac bypass circuit) selectable per channel
Input: 63A CEE 400V plug
Outputs: 2x Harting 16E
PTFD - Pulse Transformer Fired Dimming - allows control of ANY load;
Resistive and inductive loads
CCT - Current Control Technology - controls large loads gently to protect lamps;
TruPower technology allows configuration of individual channels as relays;
Auto Power On/Off to automatically switch on the relay channels when a DMX signal is present;
Full-load capable
24/7 designed & tested
3 phase power supply for electronics
Overvoltage protection
Temperature monitoring
Overheating protection
Fan optionally temperature-controlled or constantly adjustable
Isolated DMX connections
300 µs
Touch screen lockable
RDM (Remote Device Management)
Software update via SD card

Technical description
Channels: 12
Power: 12x 16 A
Fuse / FI circuit breaker: combined FI/automatic circuit breaker (RCBO), 16 A, C-type, 2 poles, 0.03 A;
Fan temperature controlled

Control & Programming
Protocol USITT DMX 512 (RDM), RS 485 (in preparation)
DMX 512 channels12
Internal memory in preparation
Menu Display LCD touch screen, backlit
DMX 512 connector XLR 5 pole male/female
Power supply: CEE 63A 400V with connection cable
Power output: 2x HAN 16E

Settings
Top Set per channel: 100-0%
Preheat per channel: 0-100%
Dimmer curve adjustable per channel
TruPower - Configuration of individual channels as relays
Softpatch: yes
Channel test: 0-100%
Phase control: yes
Hold backup DMX value, backup memory

Technical data
Mains voltage: 190-260 V 45-65 Hz, 1 and 3-phase
Power consumption: max. 64 A at 230 V (per phase)

Dimensions/weight
Dimensions (L x W x H): 48.0 x 27.5 x 13.3 cm (19", 3 U)
Weight: 21 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=305&productgroup=28&productgroupmain=4

Categories Lights (236)