Motion GmbH | dry hire rental offers

MARTIN JEM Glaciator X-Stream

MARTIN

The Glaciator X-Stream is a fully integrated high-performance ground fog machine.

The Glaciator X-Stream generates large amounts of low-lying ground fog with the help of Jem fluid and a closed cooling system.
In our rental shops it comes standard with a Y-valve and two hoses to better distribute the ground fog.

Features
Fog volume 80 m2/ min
3,500 W heating element
15 min Heating time
5 l Fluid capacity
Different fluids for different effects
Internal or external fluid tank
Protection of the machine in case of fluid shortage
Fully integrated unit without CO2 tank or dry ice
Integrated DMX interface
Device menu
Fog guidance system (optional)

Dimensions and weight
Length: 866 mm
width: 638 mm
Height: 725 mm
Weight (dry): 110 kg

Power
filling capacity: 80 m2
Fog duration: Continuous, automatic. Quantity adjustment
Heating time: approx. 15 min

Connections
Cable remote control: 3-pin XLR
DMX data: 3-pin XLR
Mains connection: IEC-EN60309-2 Connection (CEE connection)

Electrical data
Mains voltage (EU models): 220 - 240 V nominal, 50 Hz
Main fuse (220-240 V mains voltage): 32 A Fuse menu, DMX

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=176&productgroup=30&productgroupmain=10

MARTIN JEM Airforce 2

MARTIN

JEM Air Force 2 / AF-2

The AF-2 is a wind machine with high airflow. It can be controlled by DMX. The AF-2 is ideal for theme parks, stages and theaters.

Features
6,500 m3 / h
Revolutions 200 - 1380 rpm
Standing on the floor or in the truss / on the ceiling
Touring Frame (optional)
Integrated DMX interface, 3- and 5-pin
Multifunction remote control

Dimensions and weight
Width: 682 mm
Height: 707 mm
Depth: 318 mm
Weight (dry): 17 kg

Power
Maximum air flow: 6,500 m³ / hour
Fan speed: 200 - 1380 rpm

Control and programming
Control protocol: cable remote control (included in delivery), DMX;
Functions of the remote control: Immediate or timer controlled fog, adjustable fog quantity (0-100%)
Timer range: delay 2-18 s (X1), 16-144 s (X8) / fog time 2-18 s (X1), 16-144 s (X8)
DMX channels: 1
Protocol: USITT DMX 512 (1990)

Construction
Housing steel and aluminium
Installation: Orientation Any

Connections
Cable remote control: 3-pin XLR
DMX data: 3- and 5-pin XLR connectors
Mains connection: 3-pin IEC connector

Electrical data
Mains voltage (EU models): 220 - 240 V nominal, 50 Hz
Main fuse (220-240 V mains voltage): 5 A slow-blow

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=183&productgroup=30&productgroupmain=10

MARTIN JEM Airforce 1

MARTIN

JEM Air Force 1 fan

The AF-1 is a powerful fan with DMX control. It can be used on the ceiling, in a truss or standing on the floor.

Features
1.600 m3 / h
0 - 2.500 min-1
Standing on the floor or in the truss / on the ceiling
Integrated DMX interface
Multifunction remote control

Dimensions and weight
width: 320 mm height: 350 mm depth: 180 mm
Weight (dry): 10 kg

Control and programming
Control protocol:
Cable remote control (included in delivery), DMX 512, 0-10 V analog
Remote control functions:
Immediate or timer controlled fog
adjustable fog volume (0-100%)
Timer range: delay 2-18 s (X1), 16-144 s (X8) / fog time 2-18 s (X1), 16-144 s (X8)
DMX channels: 1
Protocol: USITT DMX 512 (1990)

Construction
Housing: steel

Connections
Cable remote control: 3-pin XLR
0-10 V analog: 3-pin XLR
DMX data: 3-pin XLR
Mains connection: 3-pin IEC connector

Electrical data
Mains voltage (EU models): 220 - 240 V nominal, 50 Hz

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=182&productgroup=30&productgroupmain=10

LOOK SOLUTION Viper NT

LOOK SOLUTION

Properties
Functional principle: Evaporator fog machine
Heat output: 1300 W
Controllable via DMX-512
Integrated timer
Supply voltage: 230 V / 50 Hz
Heating time: approx. 7 min.
Fluid consumption at max. output: 120 ml/min
Fluid consumption motion with continuous mist: 35 ml/min
Capacity of the fluid container: 5 l
Fog output adjustable in 99 steps
Output range: max. 15 m
0 - 10 V analog
Stand-alone operation
Temperature control: microprocessor controlled
With overheating protection by heating block/thermostat, pump and temperature switch;
Dimensions (L x W x H): 47 x 23 x 24 cm
Weight without canister: approx. 8.3 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=406&productgroup=30&productgroupmain=10

LOOK SOLUTION Viper 2.6, Smoke Machine

LOOK SOLUTION

The VIPER 2.6 is the more powerful version of the Viper NT.

It combines the latest digital technology with proven engineering and performance.
Enormously strong fog output, easy operation and the possibility to connect an external fan are the main features of this machine.

properties
Powerful vaporizer mist machine
Supply voltage: 230 V/ 50 Hz
Heating time approx. 7 min.
Heat output: 2600 W
Fluid consumption at max. output 240 ml/min.
Fluid consumption with continuous mist 70 ml/min.
Capacity of the fluid container: 5 liters
Fog output adjustable in 99 steps
Output range: max. 15 m at < 50% output Continuous fog
Fan connection: max 800 Watt (air volume adjustable in 99 steps
) Fogging time at 100% output approx. 40 sec. at 40% continuous fog
Control analog 0-10V/ DMX 512/ Stand Alone
Electronic temperature control
Heating block with thermostat
Pump with temperature switch
Housing made of galvanized, powder-coated sheet steel

Optionally available
Flight option

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=730&productgroup=30&productgroupmain=10

LOOK Orka Smoke Machine with fan and FC

LOOK SOLUTION

ORKA Tourpack: Fog & Fan in a case

The Orka in a robust flight case offers additional advantages. The integrated, powerful fan increases the output range even more. The airflow can be deflected vertically through the air baffle.

The ORKA is currently the most powerful series-produced fog machine on the market. It can be used wherever enormous amounts of fog are needed in a very short time. Due to the enormous power and the wide fog output, very large halls and stadiums can be filled with fog. This makes the ORKA the perfect machine for large events, concerts, special effects, amusement parks, large studios, large discotheques, for fire brigade and disaster control exercises and much more.  
Due to the robust housing and the compact design the machine is well suited for mobile use.

DMX 512 as standard: The ORKA can be controlled via DMX as standard. The connection is made via 5pin XLR cable. The DMX start address is set and stored via the membrane keyboard. It remains stored even if the unit is disconnected from the mains.

Analogue (0 - 10 V), the unit can be operated either from a console or optionally via XLR remote. Here the connections are plugged in via 3-pin XLR cable. A stand-alone operation is also possible. The amount of fog is adjusted directly at the unit. By briefly pressing the start button, the unit will start fogging automatically. A permanent pressing of the start-button is not necessary. With the integrated timer, fogging time in seconds, pause time in minutes and output quantity in % can be programmed exactly. The membrane keypad with illuminated numeric display and easily recognisable symbols allows uncomplicated operation through simple menu navigation. It also offers protection against soiling of the operating elements. Finest adjustment of the output quantity: digital technology enables fine adjustment of the pump. The output quantity can be adjusted in 1% steps from 0 - 99%. From the smallest fog cloud to dense continuous fog, any desired effect can be created without any problems. This allows the use in smaller locations as well as in halls.

An external fan with max. 800 Watt can be connected to the ORKA. This can be controlled via DMX 512. The unit then occupies two consecutive channels on the console.

Production and service in Germany

Technical data
Functional principle: Evaporator fog machine
Heat output: 9000 watts / 8000 watts (208 V)
Supply voltage: 3 x 230 V with neutral conductor, 50 Hz
Heating time: approx. 15 min.
Fluid consumption: at max. output: 500 ml/min. at continuous mist: 70 ml/min.
Fog output: adjustable in 99 steps
Output range: approx. 30 m
Fog time:
at max. output approx. 2 min
at < 40% output: continuous fog
Fan connection: max. 800 Watt
integrated capacitor
Air volume: adjustable in 99 steps
Control: DMX 512
0 - 10 V analog Stand alone radio remote control (option)
Temperature control
Microprocessor controlled via dual sensor
Overheating protection heating block/thermostat pump/temperature switch;
Dimensions (L x W x H): 55 x 37 x 28 cm
Weight without canister: approx. 30 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=178&productgroup=30&productgroupmain=10

DJ POWER H-2VSD Smoke Machine

DJ POWER

The H-2VSD is the world's first vertical dual output LED fog machine.

It was developed especially for the professional stage. With its unique "Super-Jet" technology, the H-2VSD can even compete with CO2 jets in terms of output speed and power. The H-2VSD is twice as fast and offers twice the brightness compared to previous vertical fog machines.
DJ POWER's "Inner Flame Color Changing" technology also enables fascinating fog coloring by allowing the core of the fog output to be lit separately from the fog front! The user-friendly LCD display and operation make the H-2VSD to an ideal device for large clubs, large stage productions and rental companies.

Power supply
Voltage AC 220 V - 240 V / 50/60 Hz
Fuse 13.5 A/250 V
Power consumption Max. 3100 W

Light source
LM TypLED Xin1
Color spectrum: RGBA
Power: 240 W
Number / Power: 37x 8W

Connections
Current in NEUTRIK powerCON
XLR in/out 3pol / 5pol

Control
DMX 512: Yes
Number of DMX channels: 14

Technical data
Effect type: Fog machine
Heat output: 3100 W
Output: 2200 m³ fog/min
Tank capacity: 3.5 litres
consumption: @ 100% 390 ml/min
Warm-up time: 9 minutes

Hardware
Dimensions (L/W/H): 590 x 315 x 325 mm
Weight: 27,00 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=847&productgroup=30&productgroupmain=10

DJ POWER H-2VS Smoke Machine

DJ POWER

DJ Power H-2VS fog machine, perfect replacement for CO2 Shooter.

Properties
No annoying carbon dioxide tanks and hoses necessary
Vertical fog emission
RGB-LED wreath for coloring the fog
Unique fire simulations
LC display for operation
Instant fog stop
Mirror Pipe Patent

Technical data
LED type: 32 x 5 W RGB LEDs (11x red, 10 green, 11x blue)
Heat output: 3000 W
Output: 1529 mÑ/min
Tank capacity: 2.5 litres
Consumption @ 100%: 270 ml/min
Heating time: 4 minutes
Number of DMX channels: 11
DMX connection: 3/5-pin XLR in/output
Power supply: AC 220 V - 240 V / 50/60 Hz
Power consumption: 3100 W
Power Twist In/Output
Dimensions: 475 x 401 x 205 mm
Weight: 16 kg

Note
Use only with Stairville Fluids (recommendation: Stairville Fast Fog Fluid 209054).
Use of other fluids may cause damage to the unit which is not covered by the warranty.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1405&productgroup=30&productgroupmain=10

CONTROLite Win Design MK3 - Posi Fan

CONTROLite

WinDesign MK 3 Posifan

High-performance wind machine with enormous air movement performance of up to 1.25m3/sec., integrated into our ControLite Moving Base, which has been proven a thousand times over.
The ControLite WinDesign is suitable for the distribution of effect fog or the design of wind effects in theatres, film and television studios, discotheques and on show stages. Fan speed and positioning are controlled via DMX512.

Features
Control signal DMX 512
DMX control: 6 channel
XLR 5 pin in / out
Fan speed: max. 1400 rpm
Max. 1.25 cubic metres/second
Power consumption: max 300 W
Mains voltage : 230 V nominal, 50/60 Hz
Dimensions:
Total height: 72.0 cm
Width: 61,4 cm
Head depth: 28,5 cm
Weight: 25 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=184&productgroup=30&productgroupmain=10

ANTARI Lüfter AF 3X

ANTARI

Wind machine with DMX interface for stage and touring use

Properties
Compact, roadworthy metal housing with stand brackets
Suitable for use with fog, snow and soap bubble machines;
Control via rotary switch or integrated DMX interface
Air outlet angle variable
Low power consumption

Technical data
Power supply: 230 V AC, 50 Hz ~
Total connected load: 100 W
Max. air flow rate: 900 m³/h
Speed: 750 - 2250 rpm
DMX 512 connector: 3-pin and 5-pin XLR
Dimensions (WxH): 333 x 370 mm
Weight: 6 kg
Shipping weight: 6,45 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=404&productgroup=30&productgroupmain=10

CHAUVET Cloud 9

CHAUVET

The ground fog machine provides highly effective, deep-seated fog effects on stage or in ballrooms.

Continuous operation generates fog over an area of 300 m2 (3,230 ft2) in a robust flight case with locking rollers with a hinged lid to allow operation even when closed.
Control via an integrated digital display or DMX Integrated water drainage system makes cleaning quick and easy.
Use the heavy fog fluid (LLG) to create the CO2 effect, which lasts several minutes before it dissolves. Use without dry ice or CO2, therefore no special license/training required.

Effects
emissions 15,000 cfm
Low Fluid Shutdown
HDF- Best performance with long lasting fog on the ground;
PHF- double effect, flat ground fog with ascending haze formation

Dimensions and weights
Dimensions: 33.85 x 19.29 x 24.80 in (860 x 490 x 630 mm)
Fog outlet diameter: 4.76 in (121 mm)
Hose length max.: 8 ft (2.44 m)
Weight: 121.3 lb (55.8 kg)
Fluid Tank: 0.92 gal (3.5 l)
Water tank: 5.3 gal (20 l)
Fluid consumption: 29 ml/min (0.007 gal/min)
Water consumption (distilled water): 165 ml/min (0.044 gal/min)
maximum running time : 2 hours maximum at 100% output

Connections
Current Schuko on Seetronic Powerkon IP65
Power Input: Seetronic Powerkon IP65 (2x 120 V, 1x 230 V)
Data connection: 3- and 5-pin XLR

Control
Protocol: DMX
DMX channels: 2
Modes 1
On-Board control possible

Electrical properties
Input voltage: 120 VAC, 60 Hz or 230 VAC, 50 Hz
Power consumption: 2,600 W, 11.3 A @ 230 V, 50 Hz (230 V version)
Heating time: 3 min
Fuse protection 20 A (230 V version)

Certificates
CE
IP class: IP20, dry environment
Ambient temperature: -4 °F to 113 °F (-20 °C to 45 °C)
Temperature output @ 230V: 8.870 BTU per hour (max)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1568&productgroup=30&productgroupmain=10

ANTARI Lüfter AF 3R

ANTARI

Wind machine with radio control and DMX interface for stage and touring use

Properties
Compact, roadworthy metal housing with stand brackets
Suitable for use with fog, snow and soap bubble machines;
Comfortable control via handy radio transmitter W-1 with 50 m range;
Control also via rotary switch or integrated DMX interface
Air outlet angle variable
Low power consumption
PowerCon input and output

Technical data
Power supply: 230 V AC, 50 Hz ~
Total connected load: 100 W
Max. air flow rate: 900 m³/h
Supplied remote control: W-1
Range: approx. 50 m
Speed: 750 - 2250 rpm
DMX512 connector: 3-pin and 5-pin XLR
Dimensions (WxH): 33 x 370 mm
Weight: 6 kg
Shipping weight: 6,75 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=651&productgroup=30&productgroupmain=10

SAGITTER Tracer 1200W

SAGITTER

1200W Follow Spot
incl. stand

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=171&productgroup=29&productgroupmain=10

ROBERT JULIAT Victor 7-14,5° 1800 MSR

ROBERT JULIAT

Tracker (Daylight) for distances.20m - 60m in the power class from 1.800W-2500W with DMX dimmer

VICTOR is well in the limelight, because although it only requires a 1,800W discharge lamp, its light output can be compared to that of a 2,500W follower. This is due in part to the highly coated lenses of the optical unit. As with most Juliat trackers, the unit has a Boomerang colour changer magazine with 6 colours and a precisely working dimmer (mechanical)

Optionally, a horizontal aperture slider can be inserted into the slot of the gobo holder - and for the frost filter also an IR filter, as a heat shield for color filters. The Victor is delivered with an electronic ballast (EVG).

Properties
Light emission angle 7° -14.5°
For lamps MSR 1800W/DE, Sfa 15,5-6
Hot Restrike
Highly coated lenses (5)
Integrated Boomerang
Colour changer (6 colours)
Handles on three sides
Ergonomic operation
Manually retractable linear frost, CTB
Gobo (A-size) in the side slot
External electronic ballast (ECG)

Version in 2 versions with manual operation axial to the handrail or DMX 512 control
Only version with DMX darkener in rental park!

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=422&productgroup=29&productgroupmain=10

ROBERT JULIAT Lancelot 2-5º 4000W HTI

ROBERT JULIAT

4000W HTI Tracker, 2-5°

Properties
electr. ballast
man. Iris module
man. Shutter module
man. Chromix module
Universal gobo holder
Quartz glass double condenser and 6-lens optics for an extremely uniform and intense light beam;
Boomerang color changer system for 6 colors
Flicker-free, electronic ballast with hot restrike
100% closing iris module with heat shield for long service life with complete black-out

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=173&productgroup=29&productgroupmain=10

ROBERT JULIAT Aramis 4,5-8° 2500W HMI

ROBERT JULIAT

The Aramis is equipped with a powerful 2,500W HMI lamp and is designed for distances from 30 to 80m.

A special quartz glass lens in the condenser optics enables the Aramis to achieve a high efficiency. The zoom is adjusted via an automatically locking, robust handle. The Aramis is equipped with a weight levelling slide for fatigue-free operation, so that the chaser can be suspended at the correct angle to the stage.
It also has a gobo mount in the side slot carrier.

Properties
Highly coated quartz glass condenser optics for maximum light yield and a sharply focused light beam;
External magnetic or electronic ballast (flicker-free), low-noise hot restrike;
Ergonomic operation for fatigue-free working
Boomerang color changer system for 6 colors (optionally also with push/pull color changer system)
Manually retractable frost and CTO filter

Technical data
Dimensions: 1.490 x 505 x 550mm (with bracket)
Gobo size: B size
Power of the illuminant: 2.500W
Socket/lamp type: SFa21-12
Beam angle/zoom: 4.5°-8°
Ballast Hot Restrike, magnetic
Operating voltage/ supply voltage: 230/245V, 50Hz
Weight (without packaging): 59kg

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=296&productgroup=29&productgroupmain=10

ROBE RoboSpot Base Station without Camera

ROBE

The RoboSpot BaseStation allows the remote control of the BMFL FollowSpot or BMFL FollowSpot LT, specially developed moving head spotlights with an integrated RoboSpot Camera.
The RoboSpot BaseStation can also be operated with a separate RoboSpot MotionCamera. In this case, BMFL Spot, BMFL Blade, BMFL WashBeam, DL7S, DL4S, MegaPointe or Pointe can also be operated as remote controlled followers.
The RoboSpot BaseStation has a 15.6" HD touch screen, on which the operator can overlook what is happening on stage.
The picture is provided either by the RoboSpot Motion Camera with its own pan and tilt or by the RoboSpot Camera mounted directly on BMFL FollowSpot. The operator gets complete control over the FollowSpot with the help of the handles of the RoboSpot BaseStation, two programmable faders (e.g. for dimmer and zoom), four custom programmable jog wheels and ten assignable control buttons. The movement of the handles on the RoboSpot BaseStation is transmitted without delay to the connected spotlight selected as a chaser.
While the chaser operator is operating the chaser, all internal values and features of the chaser can be accessed via the connected mixing console. This makes it possible to use the chasers as full-fledged spotlights in the show and to operate them only as chasers from the BaseStation when required.
Up to twelve spotlights can be controlled simultaneously from one RoboSpot BaseStation.

Technical data
15.6 inch monitor
QVGA Robe Touchscreen with battery buffer
4 encoder wheels
10 preset buttons with direct access to pre-programmed functions
Activation and blackout button
Pan & Tilt "Freeze" button
Manual movement control with position indication on the monitor;
2 sliders on the handles for direct access to important functions 0 -100% (e.g. dimmer and iris), assignable to each function of the operated moving head spotlight (focus, zoom, frost, etc.)
User defined setup of the control channels
Saving and uploading of user-defined setups
Simultaneous control of only one headlamp possible
Power consumption 100 - 240 V, 50/60 Hz
Power consumption: 15 W
Mains power connector: Neutrik powerCON TRUE1
DMX and RDM data in/out: lockable 3-pin & 5-pin XLR
Network interface: RJ45
Video input: RJ45

Additionally, corresponding articles are required:
ROBE BMFL FollowSpot 5- 45° incl. camera
ROBE BMFL FollowSpot 3,5- 10° LT incl. camera
ROBE RoboSpot Motion Camera

Compatible lamps for ROBE RoboSpot Motion Camera are:
BMFL Spot, BMFL Blade, BMFL WashBeam, DL7S, DL4S, MegaPointe or Pointe

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=810&productgroup=29&productgroupmain=10

ROBE RoboSpot Motion Camera

ROBE

The RoboSpot MotionCamera is the remote camera for the ROBE RoboSpot tracking system when no BMFL FollowSpot is used.

The camera is a revolutionary moving-head with an integrated HD camera that can remotely control, pan, tilt, zoom and autofocus via DMX.

With a full HD camera and high light sensitivity up to 0.3 lux illuminance, the device provides a "first person view" for the follow operator to follow the artist across the stage.
Video signals are transmitted to the RoboSpot BaseStation via a Cat cable.

Additionally for the pursuit company corresponding articles are needed:
ROBE RoboSpot Base Station without camera

Compatible lamps for ROBE RoboSpot Motion Camera are:
BMFL Spot, BMFL Blade, BMFL WashBeam, DL7S, DL4S, MegaPointe or Pointe

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=812&productgroup=29&productgroupmain=10

ROBE BMFL FollowSpot ST 5- 45° incl. Camera

ROBE

The BMFL Followspot is the moving light specially developed for the ROBE RoboSpot System and equipped with a camera.

With the enormous brightness and 5-45° of the BMFL a REAL spot replacement.
The following other article is required for operation as a follow: ROBE RoboSpot Base Station with camera

Alternatively there is also the LT (long throw) variant of the BMFL FollowSpot

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=811&productgroup=29&productgroupmain=10

ROBE BMFL FollowSpot 3,5- 10° LT incl. Camera

ROBE

The BMFL Followspot LT is the LONG THROW version of the BMFL for the ROBE RoboSpot System, equipped with camera.

With the enormous luminosity and 3,5° - 10° of the BMFL a REAL spot replacement for larger locations.
The following other article is required for operation as a follow: ROBE RoboSpot Base Station with camera

Alternatively there is also the standard version of the BMFL FollowSpot with 5°-45°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=813&productgroup=29&productgroupmain=10

LDR Canto 2000 MSR Follow Spot

LDR

Properties
Double condenser optics Tracker for discharge lamp MSR 2000 FastFit;
Zoom optics
External ballast
Fan assisted ventilation
Safety double microswitch

Technical data
Beam angle: 8° - 22°
2000 MSR Gold FastFit PGJX50 750 hrs
2000 MSR Gold/2 FastFit PGJX50 750 hrs
Weight: 19,8 kg
Dimensions: 1020 x 420 x 220 mm

Scope of delivery
2 m connection cable
Iris diaphragm
Built-in mechanical dimmer
Pivot 28 mm
Filter frame

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1549&productgroup=29&productgroupmain=10

CLAY PAKY Shadow QS-LT

CLAY PAKY

1,2KW, Long Throw for distances between 15-50m incl. tripod

Properties
intelligent tracker for long distances
1200W discharge lamp
Adjustable control panel with user-friendly faders and buttons; standard 3.8° lens (optimal for distances of 30 - 50m)
Switchable 7.6° wide angle lens (optimal for distances 15-38m)
Color wheel with 7 colors, CTO and CTB correction filter
Gobo holder
0-100% iris, fader controlled, stepwise adjustable opening speed;
0-100% mechanical linear dimmer with strobe effect

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=172&productgroup=29&productgroupmain=10

ULTRALITE Dimmer D1225 12x2,5KW grey

ULTRALITE

Properties
Input: 32A CEE 5p
Output: 2x Harting HB16
Fuses: 12x 13A

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=193&productgroup=28&productgroupmain=4

MA LIGHTING Dimmer 12x 2,3kw without RCD

MA LIGHTING

MA Lighting Digital Dimmer 12x2,3KW without RCD

Properties
Sturdy coated 19"/ 3 U sheet steel enclosure with internal chassis;
Power class with permanent load resistant 2.300VA
Master/slave mode for simultaneous program call via MIDI in rack mode;
Control via DMX512
Connection cable with 32A CEE/400V

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=391&productgroup=28&productgroupmain=4

LSC GenVI 12x16 A Dimmer, 63A

LSC

GenVI is the latest generation of dimmer packs from LSC.

Gone are the "good old days" when you had to carry power distributors, dimmer and switchpacks and hot patches to every event. GenVI combines all devices in a compact, modern 3 U housing and makes work easier, especially in the newly developing LED spotlight market.

The GenVI series uses a good old dimmer technology which is a little bit more expensive but can control almost any kind of load without stress. PTFD which stands for Pulse Transformer Fired Dimming, dims resistive and inductive loads, LEDs with minimal current consumption (and that without the parallel connection of several 100 W bulbs under the stage), mirror ball motors and much more. And since dimming is already done with 16-bit technology today, GenVi is also equipped with the corresponding software.

Behind the name TruePower there is another useful function. If, for example, daylight or UV spots are to be switched, each channel can be reconfigured separately as a true relay. This is not a switch curve emulated by the software but a real relay. By means of the Auto-Power function the relays configured as TruPower.

Yes, and GenVI is also ideal for use as a power distributor. Because - each channel can be configured very easily from the DMX patch. Once configured, this channel and all other channels are switched on one after the other as soon as the GenVI is supplied with power. To protect the twelve channels GenVI has combined RCBO's. These are combinations of residual current circuit breakers (RCBO) and 2-pole disconnecting circuit breakers. In the event of shutdown by a residual current - the so-called earth fault - not the entire dimmer pack fails, but only the affected channel. For the user, this feature means increased safety during the entire production process.

GenVI combines all the features you can expect from a current dimmer as well as power distribution and power-distro systems in one device. Thanks to per-channel configuration, GenVI offers absolute flexibility on every job.
>br> Features
12x 16 A combination circuit breakers (2 poles + FI)
16 bit DMX mode optional
Trupower (triac bypass circuit) selectable per channel
Input: 63A CEE 400V plug
Outputs: 2x Harting 16E
PTFD - Pulse Transformer Fired Dimming - allows control of ANY load;
Resistive and inductive loads
CCT - Current Control Technology - controls large loads gently to protect lamps;
TruPower technology allows configuration of individual channels as relays;
Auto Power On/Off to automatically switch on the relay channels when a DMX signal is present;
Full-load capable
24/7 designed & tested
3 phase power supply for electronics
Overvoltage protection
Temperature monitoring
Overheating protection
Fan optionally temperature-controlled or constantly adjustable
Isolated DMX connections
300 µs
Touch screen lockable
RDM (Remote Device Management)
Software update via SD card

Technical description
Channels: 12
Power: 12x 16 A
Fuse / FI circuit breaker: combined FI/automatic circuit breaker (RCBO), 16 A, C-type, 2 poles, 0.03 A;
Fan temperature controlled

Control & Programming
Protocol USITT DMX 512 (RDM), RS 485 (in preparation)
DMX 512 channels12
Internal memory in preparation
Menu Display LCD touch screen, backlit
DMX 512 connector XLR 5 pole male/female
Power supply: CEE 63A 400V with connection cable
Power output: 2x HAN 16E

Settings
Top Set per channel: 100-0%
Preheat per channel: 0-100%
Dimmer curve adjustable per channel
TruPower - Configuration of individual channels as relays
Softpatch: yes
Channel test: 0-100%
Phase control: yes
Hold backup DMX value, backup memory

Technical data
Mains voltage: 190-260 V 45-65 Hz, 1 and 3-phase
Power consumption: max. 64 A at 230 V (per phase)

Dimensions/weight
Dimensions (L x W x H): 48.0 x 27.5 x 13.3 cm (19", 3 U)
Weight: 21 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=305&productgroup=28&productgroupmain=4

LSC GenVI 12x13 A Dimmer, 32A

LSC

GenVI is the latest generation of dimmer packs from LSC.

Gone are the "good old days" when you had to carry power distributors, dimmer and switchpacks and hot patches to every event. GenVI combines all devices in a compact, modern 3 U housing and makes work easier, especially in the newly developing LED spotlight market.

The GenVI series uses a good old dimmer technology which is a little bit more expensive but can control almost any kind of load without stress. PTFD which stands for Pulse Transformer Fired Dimming dims resistive and inductive loads, LEDs with minimal current consumption (and that without the parallel connection of several 100 W bulbs under the stage), mirror ball motors and much more. And since dimming is already done with 16-bit technology today, GenVi is also equipped with the corresponding software.

Behind the name TruePower there is another useful function. If, for example, daylight or UV spots are to be switched, each channel can be reconfigured separately as a true relay. This is not a switch curve emulated by the software but a real relay. By means of the Auto-Power function the relays configured as TruPower.

Yes, and GenVI can also be used excellently as a power distributor. Because - each channel can be easily configured from the DMX patch. Once configured, this channel and all other channels are switched on one after the other as soon as the GenVI is supplied with power. To protect the twelve channels GenVI has combined RCBO's. These are combinations of residual current circuit breakers (RCD) and 2-pole disconnecting circuit breakers. In the event of shutdown by a residual current - the so-called earth fault - not the entire dimmer pack fails, but only the affected channel. For the user, this feature means increased safety during the entire production process.

GenVI combines all the features you can expect from a current dimmer as well as power distribution and power-distro systems in one device. Thanks to per-channel configuration, GenVI offers absolute flexibility on every job.

Features
12x 13 A Combi-automats (2 poles + FI)
16 bit DMX mode optional
Trupower (triac bypass circuit) selectable per channel
Input 32A CEE 400V plug (no 13A can be used simultaneously for all 12 channels !)
Outputs 2x Harting 16E
PTFD - Pulse Transformer Fired Dimming - allows control of ANY load;
Ohmic and inductive loads
CCT - Current Control Technology - controls large loads gently to protect lamps;
TruPower technology allows configuration of individual channels as Relay;
Auto Power On/Off to automatically switch on the relay channels when a DMX signal is applied;
Full-load capable
24/7 designed & tested
3 phase power supply for electronics
Overvoltage protection
Temperature monitoring
Overheating protection
Fan optionally temperature controlled or constantly adjustable
Isolated DMX connections
300 µs
Touch screen lockable
RDM (Remote Device Management)
Software update via SD card

Technical description
Channels: 12
Power: 12x 13 A theoretically, because of 32A connection plug total 3x 32A (12x 8A)
Fuse / RCD Circuit breaker: combined RCD/automatic circuit breaker (RCBO), 13 A, C-type, 2-pole, 0.03 A;
Fan temperature controlled

Control & Programming
Protocol USITT DMX 512 (RDM), RS 485 (in preparation)
DMX 512 channels12
Internal memory in preparation
Menu Display LCD touch screen, backlit
DMX 512 connector XLR 5 pole male/female
Mains connection: CEE 32A 400V with connection cable
Power output: 2x HAN 16E

Settings
Top Set per channel: 100-0%
Preheat per channel: 0-100%
Dimmer curve adjustable per channel
TruPower - Configuration of individual channels as relays
Softpatch: yes
Channel test: 0-100%
Phase control: yes
Hold backup DMX value, backup memory

Technical data
Mains voltage: 190-260 V 45-65 Hz, 1 and 3-phase
Current consumption: max. 52 A at 230 V (per phase)

Dimensions/weight
Dimensions (L x W x H): 48.0 x 27.5 x 13.3 cm (19 inch, 3U)
Weight: 18,5 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=304&productgroup=28&productgroupmain=4

Hand dimmer DS-2 RF 1x10A DMX

STAIRVILLE

Compact 1-channel DMX dimmer with fader

Properties
The DS-2 can be set as a dimmer or switch pack via the menu.
DMX addressing and setting of functions via display
DMX input and output: 3-pin XLR !!!
Power supply: AC 230V ~ 50 Hz
max. power 10 A

source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=192&productgroup=28&productgroupmain=4

CAMCO Dimmer 12x16A Model 1216

CAMCO

Properties
32A CEE connection
Fuses 12x 16A

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=194&productgroup=28&productgroupmain=4

AVOLITES ART 2000 Powerrack 48ch DIM

AVOLITES

The ART2000 system offers a complete solution for dimming conventional lamps as well as for the power supply of moving lights.

Separate power distribution systems are no longer required, resulting in shorter set-up times and simpler setups for shows of all kinds. The tour versions of the Avolites dimmers are built in a modular design, so that in case of service a single plug-in unit can be replaced in a few easy steps instead of having to replace the whole unit.
With the ART2000 up to 48 channels can be controlled. Up to 4 modules with max. 12 channels each can be used.

The following module variants are available:
12-channel 16 A dimmer module
12-channel 16 A fixed current module, for example for moving lights

Modules with the same number of channels can be interchanged at will, allowing the racks to be configured for any application.

Additional features
DIGI ammeter (digital multifunction meter)
Rack splitter 2x 1 in/5 out
Current distributor (with automatic circuit breakers, FI circuit breaker 30mA)
Patch panel Wieland GST 18/3
Fixed current output 1xCEE 32A 5pole
Fixed current outlet 3xCEE 16A blue
20 x hard input output
Powerlock in and out
Ground point

During the development of the Avolites dimmers, special attention was paid to the best possible interference suppression (240 µs rise time).
Also the DMX functionality (each channel can be patched individually or in blocks to two universes) has proven itself many times over.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=159&productgroup=28&productgroupmain=4

AVOLITES ART 2000 Powercube

AVOLITES

Dimmer system

Properties
12*10A Dimmer circuits
6x 10A combined dimmer fixed circuits
6x 16A fixed circuits
8x Harting HAN16E output (1/9)
Three 63A single residual current circuit breakers 30mA
Two CEE blue 16A outlets
Connection cable 1,5m 5x10qmm with 63A CEE 5pin plug
Compact dimensions: 50 x 52 x 43 cm (WxHxD), including lids;
DMX512 input with two galvanically isolated splitter outputs;
ART2000 features such as blockwise or channelwise patching;
Dimmer curve, preheat and limit adjustable per channel
Twelve memory locations can be edited and recalled remotely;
18 knobs for local control of the dimmers
12 rotary knobs for controlling the memory locations

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=160&productgroup=28&productgroupmain=4

WIRELESS SOLUTION F-1 G4S MK2 W-DMX

WIRELESS SOLUTION

Properties
Wireless DMX Indoor
Transmitter or receiver for 512DMX channels
2.4GHz & 5.8GHz
incl. power cord / Schuko Powercon
Mode: G3/ G4/ G4S

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=420&productgroup=27&productgroupmain=4

WIRELESS SOLUTION BlackBox R-512 G4 Mk2, W-DMX Rec

WIRELESS SOLUTION

Wireless Solutions BlackBox R-512 G4 Mk2, W-DMX Receiver

The Wireless Solution W-DMX™ technology achieves the highest possible operational reliability through adaptive frequency hopping and offers a patented method for the correction of transmission errors as well as the proven One-Button-2-Go technology.
Furthermore, all Wireless Solution BlackBox models have a universal 90-250V power supply and can also be operated with 12V.
All G4 devices are fully compatible with Wireless Solution Generation 3, which offers the advantage that both generations can be combined in one system.

Features
Safe W-DMX™ Technology
Compatible with all G3 devices
Plug-and-play capability
One-Button-2-Go technique
Receiver for 1 DMX universe

Technical data
Power supply: 90-250V, 50/60Hz
DMX channels: 512 (1 universe)
Using multiple receivers: 32 DMX universes
Frequency response: 2.45 / 5.8 GHz
Max. distance: 700m
Dimensions (WxDxH): 234x150x60mm
Weight: 0,23kg
Scope of delivery 1x Dualband Antenna Outdoor V3
1x antenna adapter
1x 12V connector
1x 19" rack angle

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=413&productgroup=27&productgroupmain=4

WIRELESS SOLUTION F-1 G4 IP65, W-DMX

WIRELESS SOLUTION

Properties
WDMX Outdoor
Transmitter or receiver for 512DMX channels
2.4GHz & 5.8GHz
Mode: G3/ G4/ G4S
incl. antenna

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=191&productgroup=27&productgroupmain=4

USV APC Smart-UPS RM 1500VA RM

APC

Properties
UPS for uninterruptible power supply
Output power: 980W / 1500VA
Output voltage: 4x 230V
Cold appliance socket incl. power cable

Optional
Adap. Powercon input/blue
Adap. Cold appliance plug to Schuko distributor
Adap. Cold appliance plug on Schuko coupling

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=331&productgroup=27&productgroupmain=4

MADRIX Key ultimate V3.X

MADRIX

Madrix 3 Professional LED Lighting Controller

Madrix is a very powerful yet easy to use software for LED lighting control.
The software enables the realization of various LED projects and lighting designs in 2D (Pixel Mapping) as well as in real, spatial 3D (Voxel Mapping). Lighting effects, graphics and animations are generated live and in real-time.
The large amount of content can be fully customized (in speed, color, shapes, direction, size, motion, position, brightness, etc). New slides and scenes can be easily created in seconds by the user.
Madrix also offers the possibilities of a video server: photos, images and videos can be easily loaded and played back as well as live video signals, screen capturing, scrolling text and more.
Three real-time preview windows including 2D or 3D display, zoom and rotation allow a full overview of the output. You can easily switch between the two video decks via crossfader. The license is activated via a USB dongle and can be used flexibly on different computers as required. Several Madrix licenses can be used in parallel.

Special properties
Pixel Mapping (2D) and Voxel Mapping (3D)
Media server functions
Effect Generator and Render Engine
Supports DMX512, ArtNet, sACN and more
Remote control via DMX-IN, ArtNet Remote, MIDI-IN, Remote HTTP
Time Code via ArtNet, MIDI, SMPTE or system time
256 DMX universes, 2x DVI-Out (Ultimate !)
Patch Editor
Fixture editor and extensive library
256 x 256 storage spaces for organizing effects supported in WYSIWYG R23 or higher;
Touchscreen Interface

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=470&productgroup=27&productgroupmain=4

MA LIGHTING VPU plus MK2, Video Processing Unit

MA LIGHTING

With the MA VPU (Video Processing Unit) MA Lighting has developed a series of powerful solutions for the control, live access and modification of videos, images and 3D objects.

All videos, images and 3D objects can be scaled, positioned, tiled, coloured and modified directly from any grandMA2. All these functions are structured so simply that operating the MA VPU is no more complicated than operating another fixture. The MA VPU only needs to be integrated into the network session.
No additional parameters are required to control the MA VPU. Thanks to the MA philosophy, the operation is extremely intuitive. Users who are already familiar with grandMA2 will have no problems with the MA VPU. In addition, the free MA VPU software includes a Teaser Mode that allows two layers with limited resolution to be played back from a Windows computer.
Thanks to the performance of the MA VPU's new HAP codec all videos can now be displayed in larger than Full-HD.
Furthermore, the internal output synchronization of the MA-Net2 guarantees the highest possible frame and DMX synchronicity. Powerful functions such as vertical and horizontal soft edge blending or keystone correction are also included in the scope of functions. Videos can be scaled to any desired size. In addition, the MA VPU has a convincing 3D keystoning function, which allows content to be placed on any 3D object, regardless of its shape or size. In addition, frame interpolation and smooth speed control can be used to adjust the playback speed. In addition, the MA VPU offers a number of functions, features and effects such as frame blending, colour boost, dynamic colour key, contrast, brightness, saturation as well as blur, sepia, greyscale, wave, invert and much more. The application is comfortable and self-explanatory. So you can also easily create and control combinations of videos and images.

The MA VPU supports JPEG and Windows bitmap images like *.bmp and *.gif as well as *.png with alpha channel. Up to 32 3D video layers are possible. Via grandMA2 the MA VPU can also be programmed in blind and preview mode.
This means that the MA VPU follows the console in blind mode, which makes programming much easier. The MA VPU also allows a single-layer transition, where the user no longer has to select the display layers himself. He can program everything on one layer, and the times can also be programmed individually.
All three MA VPU versions, MA VPU plus MK2, MA VPU basic MK2 and MA VPU light are optimized for transport and daily tour use. Each MA VPU also offers 17GB pre-installed content.

Features
Comfortable and fast configuration, programming, operation, content distribution and software updates via any grandMA2;
Best integration for immediate work
Blind and preview programming possible (switchable from the console)
Built-in EDID manager for correct assignment of output
Powerful Pixel Mapper functionality - DVI output and Pixel Mapper can be used in parallel;
Highest possible frame and DMX synchronization
Extremely low latency when integrating live video (MA VPU plus MK2 and MA VPU basic MK2)
Comfortable 3D keystoning and soft edging
Efficient backup solution - one MA VPU can serve as a backup for any other MA VPU on the network
Built-in text ticker and test pattern generator
Layer reference option: Each layer can be used as input for any other layer;
Professional sound playback (with ground lift)
Best hardware components, encapsulated and decoupled, guarantee excellent performance and extreme reliability

Technical data
Operating voltage/ supply voltage 120V/230V, 50/60Hz (switches automatically)
Power 400VA
Dimensions 484 x 211 x 627mm / 19 x 8.3 x 24.7inch
Weight (without packaging) 15kg / 33lbs
Connectors on the output side:
3 x DVI
2 x XLR
3pin sound (balanced)
2 x etherCON
2 x USB
1 x eSATA
1 x PowerCON out
Connectors on the input side:
1 x powerCON In
2x SDI

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=301&productgroup=27&productgroupmain=4

MA LIGHTING Tour Pack for MA onPC command wing

MA LIGHTING

For everyday road use, the Tour Pack consists of a pre-configured HP All-in-One Touch PC (HP Compaq Elite 8300 All-in-One Touch PC with Windows 7) plus monitor stand and protective cover.
The hardware is built into a case for safe and comfortable transport. The Tour Pack is designed to be equipped with an existing MA onPC command wing.

Scope of delivery:
MA Tour Pack for MA onPC command wing
incl. Case and HP All-in-One Touch PC
incl. GrandMA OnPC software pre-installed
incl. Y-cable for mains connection

OPTIONAL:
MA onPC Commandwing

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=302&productgroup=27&productgroupmain=4

MA LIGHTING Network Switch, FIBERFOX LWL (MM)

MA LIGHTING

MA Lighting certified network switch with fiber optic connection for lighting control networks

Features
Simplicity: Easy setup and management
MA DNA: Support and reliability guaranteed
Developed for lighting engineers: Works with standard light protocols
Performance: All ports operate in the Gigabit range
Network: Compatible with IEEE 802.3ab Gigabit Ethernet

Technical data
Operating voltage/ supply voltage 100/240V, 50/60Hz (switches automatically)
Powermax. 100VA
Dimensions 483 x 43 x 264mm / 19 x 1.69 x 10.4inch
Weight (without packaging) 3.7kg / 8.2lbs
Connectors on the output side:
9x etherCON
2x prepared SFP Cages for Mini-GBIC
2x Fiberfox EBC1502 incl. Mini-GBIC
Connectors on the input side:
1 x powerCON
1 x USB type B

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=320&productgroup=27&productgroupmain=4

MA LIGHTING Lightcommander 48/6

MA LIGHTING

Features
255 circles
48/96 Fader
Housing made of sturdy, coated sheet steel with solid wood side panels;
Channel doubling in wide mode
Live and blind mode for programming and modifying
Master/Slave function and MIDI
Sequences accessible via X-fader with full graphic display
Saving the programs on RAM card
Softpatch with 255 DMX channels
Program sequences with freely selectable times
Learn-Speed button for direct input of the running light cycle
DMX and parallel 54-channel analog output (LC ll 48/6)

Technical data
Dimensions: 1190 x 620 x 135mm (l/w/h)
Weight: 24.0kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=157&productgroup=27&productgroupmain=4

MA LIGHTING Lightcommander 24/6

MA LIGHTING

24 channel light mixer, expandable to 48 channels, DMX, work with stage sets, chases and single groups possible

Features
255 circles
24/48 Faders
Housing made of sturdy, coated sheet steel with solid wood side panels
Channel doubling in wide mode
Live and blind mode for programming and modifying
Master/Slave function and MIDI
Sequences accessible via X-fader with full graphic display
Saving the programs on RAM card
Softpatch with 255 DMX channels
Program sequences with freely selectable times
Learn-Speed button for direct input of the running light cycle
Dimensions: 740 x 620 x 135mm (L/W/H)
Weight: 16.0kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=156&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 8Port Node

MA LIGHTING

The grandMA3 8Port Node is MA Lighting's largest converter for converting network data to DMX.
Specially designed to output eight DMX universes synchronously from each grandMA3 session, the Node, housed in a 19"/1RU enclosure, is perfectly suited for touring and fixed installations.
All grandMA3 xPort Nodes are designed to meet the ever-increasing demands of touring and fixed installations.
The Nodes provide a secure and stable backbone for synchronized data transport. To ensure easy access to DMX output and input, all nodes are remotely configurable from a console or onPC in the session.

Features
Power: max. 15VA
Connectors: 1 powerCON TRUE1
1 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1386&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 onPC 8Port Node 4K

MA LIGHTING

The grandMA3 onPC 8Port Node 4K in combination with grandMA3 onPC 4.096 enables parameters and provides eight DMX outputs on the rear panel.

Installed in a 19"/1RU chassis this Node is the most powerful network to DMX converter of the grandMA3 onPC series and is perfectly suited for touring and fixed installations.
MA Lighting offers the perfect solution to enter the world of lighting control. Simply download the free grandMA3 onPC software.
In combination with a PC and a MA onPC product parameters can be unlocked.

Features
Parameter Mode3: 4,096 (HTP/LTP)
Parameter Mode2: 2.048 (HTP/LTP)
Power: max. 15VA
Connectors: 1 powerCON TRUE1 1 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1385&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 Processing Unit M

MA LIGHTING

By adding grandMA3 processing units a grandMA3 system can be expanded very easily.
The grandMA3 processing unit M extends the system by 4,096 parameters and offers the system designer the possibility to scale the lighting control system in small steps.
In addition to the powerful CPU for frame-synchronous calculation, the grandMA3 processing unit M also offers Mode2, which allows existing grandMA2 systems to be expanded by 4,096 parameters, like the NPU from series 2.

Features
Parameter Mode 3: 4.096 (HTP/LTP)
Parameter NPU Mode 2: 4.096 (HTP/LTP)
Power: max. 200VA
Connectors:
1 powerCON TRUE1
2 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=842&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 Processing Unit L

MA LIGHTING

The grandMA3 processing unit L expands the system by 8,192 parameters and offers frame-synchronous calculation of parameters within the MA-Net3 environment.
The L-model is designed for larger systems and offers a more cost-effective and compact solution for parameter expansion.
In addition, the grandMA3 processing unit L offers an NPU Mode 2 for expanding existing grandMA2 systems by 4,096 parameters.

Features
Parameter Mode3: 8,192 (HTP/LTP)
Parameter Mode2: 4.096 (HTP/LTP)
Power: max. 200VA
Connectors: 1 powerCON TRUE1
2 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=931&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 light

MA LIGHTING

The grandMA3 light is the workhorse of the grandMA3 series and offers the perfect combination of power and size.

The grandMA3 light is suitable for any kind of application and is also the right choice for demanding productions.
This makes it probably the most versatile console on the market.
With its 60 physical playbacks, 16 assignable x-keys and the dedicated master playback section the grandMA3 light offers a wide range of playback possibilities. Large multi-touch monitors provide instant access to programming tools and are fully configurable for individual requirements. The two letterbox monitors behave in a context-sensitive way and provide feedback and options for the grandMA3 playback and encoder hardware.With its 8,192 control parameters grandMA3 light is the perfect base platform for the world's most prestigious entertainment lighting applications.
The system size is scalable up to 250,000 parameters using grandMA3 processing units. The grandMA3 light is compatible with grandMA2 and grandMA3 software. Its hardware is ergonomically optimized and can be classified as a silent version by default.

The Grand MA 3 light can also be started natively in "Grand MA2 Mode" max. parameter in Mode3: 8.192 max. parameter in Mode2: 4.096

Features
Real-time control of up to 250,000 parameters per session in combination with grandMA3 processing units;
6 DMX outputs, 1 DMX input
2 internal multitouch screens in foldable monitorwing
2 internal letterbox multitouch screens
2 internal multitouch command screens
2 external multitouch screens can be connected
41 rotatable RGB backlit encoders
5 backlit dual encoders
15 motorized and backlit 60mm faders
60 independent playbacks
16 assignable x-keys
Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
3 etherCON and 6 USB ports
2 backlit and motorized A/B 100mm faders
Individually backlit, dimmable and low-noise (clickless) buttons

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=840&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 full-size

MA LIGHTING

The grandMA3 full-size console is the flagship of the grandMA3 series.

The console offers the ultimate MA Lighting control hardware and is designed to provide an uncompromising solution for professional users who value absolute flexibility. The freely assignable Level Wheel section and the dedicated Master Playback area provide quick access to a powerful range of functions. The grandMA3 full-size with its 120 physical playbacks and 16 assignable x-keys offers the most flexible playback platform MA Lighting has ever produced.
With its 12,288 control parameters the grandMA3 full-size console is the perfect base platform for the world's most prestigious entertainment lighting applications. The system size is scalable up to 250.000 parameters with the help of grandMA3 processing unit. Large multi-touch monitors provide instant access to programming tools and are fully configurable for individual requirements. The three letterbox monitors are context sensitive and provide feedback and options for the grandMA3 playback and encoder hardware. The grandMA3 full-size is compatible with the grandMA2 and grandMA3 software. Its hardware is ergonomically optimised and can be classified as a silent version by default.

The Grand MA 3 can be started in "Grand MA2 Mode" max. parameters in Mode3: 12.288 max. parameters in Mode2: 8.192

Features
Real-time control of up to 250,000 parameters per session in combination with grandMA3 processing unit;
6 DMX outputs, 1 DMX input
3 internal multitouch screens in foldable monitorwing
3 internal letterbox multitouch screens
2 internal multitouch command screens
2 external multitouch screens can be connected
2 multifunctional level wheels
2 multifunctional single encoders
71 rotatable RGB backlit encoders
5 backlit dual encoders
30 motorized and backlit 60mm faders
120 independent playbacks
16 assignable x-keys Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
3 etherCON and 6 USB ports
2 backlit and motorized A/B 100mm faders
Individually backlit, dimmable and low-noise (clickless) buttons

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=841&productgroup=27&productgroupmain=4

MA LIGHTING grandMA2 ultra light

MA LIGHTING

The grandMA2 ultra-light has the full networking capability of the grandMA2 series.
All controls are located in the same place as on the larger console models. With its 4,096 parameters and six DMX outputs the grandMA2 ultra-light is also perfect as a back-up solution. Thanks to the grandMA2 ultra-light all features of the series 2 are also available for smaller shows and budgets. This includes intuitive and fast control of all lighting worlds and an almost unlimited number of presets, cues, pages, sequences and effects.

Features
Real-time control for up to 65,536 parameters per session in conjunction with MA NPU (corresponds to 256 DMX universes)
4,096 HTP/LTP parameters
6 DMX Outputs
1 internal TFT wide touch screen (15.4\" WXGA)
2 external TFT screens can be connected (UXGA, can be touch screens;
1 internal command screen - multi-touch (9\" SVGA)
15 Executor motor faders
Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
2 Ethercon connectors
4 USB 2.0 ports
Motorized Monitor-Wing
2 motorized A/B faders 100mm
Individually backlit and individually dimmable, noiseless buttons;
Optional with two external screens

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=146&productgroup=27&productgroupmain=4

MA LIGHTING grandMA2 light

MA LIGHTING

The grandMA2 light has 4,096 parameters, 15 executor motor faders and two touch screens. All other features and controls are identical to the grandMA2 full-size.
The grandMA2 light is the perfect tool for controlling white lights, moving lights, LEDs and media servers. The console offers intuitive and fast control of all fixtures and channels and can handle an almost unlimited number of presets, cues, pages, sequences and effects. It is ideal as a stand-alone console or back-up solution for the grandMA2 full-size. Furthermore the console is compatible with "Series 1".

Features
Real-time control for up to 65,536 parameters per session in conjunction with MA NPU (corresponds to 256 DMX universes);
4,096 HTP/LTP parameters
6 DMX outputs
2 internal TFT wide touch screens (15.4 inch WXGA)
2 external TFT screens can be connected (UXGA, can be touch screens) 1 internal command screen - multi-touch (9 inch SVGA)
15 Executor motor faders
Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
2 Ethercon connectors
5 USB 2.0 ports
Motorized Monitor-Wing
2 motorized A/B faders 100mm
Individually backlit and individually dimmable, noiseless buttons
Optional with two external screens

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=145&productgroup=27&productgroupmain=4

MA LIGHTING grandMA2 full-size

MA LIGHTING

With the grandMA2 full-size MA Lighting presents its most powerful console, which conveniently integrates the control of white light, moving lights, LEDs and media servers in one platform.
Equipped with the latest technology and special features (e.g. a multi-touch command screen and an integrated keyboard extension), grandMA2 full-size is at home in all areas of application. The console offers intuitive and fast control of all fixtures and channels. Furthermore, thanks to the newly developed grandMA2 faderwing, up to 60 additional executor motor faders are available and can be used for an almost unlimited number of pages.
Furthermore, grandMA2 full-size is able to read show files from "Series 1" consoles and even work in "Series 1" mode. This makes the grandMA2 consoles fully compatible with "Series 1". To make work even easier, all controls are located in the same place on every console model of the new series - no rethinking is necessary. grandMA2 offers highly flexible and comfortable programming possibilities including an almost unlimited number of presets, cues, pages, sequences and effects.

Features
65,536 parameters per session in connection with MA NPUs (corresponds to 256 DMX universes)
8,192 HTP/LTP parameters (6 x DMX outputs)
3 internal TFT wide touch screens (15.4" WXGA)
2 external TFT screens can be connected (UXGA, can be touch screens)
1 internal command screen - multi-touch (9" SVGA)*
30 Executor motor faders
Integrated keyboard drawer*
Built-in uninterruptible power supply (UPS)
2 Ethercon connectors
5 USB 2.0 ports
Motorized Monitor-Wing*
2 motorized A/B faders 100mm
Individually backlit and individually dimmable, noiseless buttons
Optional with two external screens

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=144&productgroup=27&productgroupmain=4 Translated with www.DeepL.com/Translator (free version)

Mit der grandMA2 full-size präsentiert MA Lighting sein leistungsstärkstes Pult, das die Ansteuerung von Weißlicht, Moving Lights, LEDs sowie Medienservern komfortabel in einer Plattform integriert.
Ausgestattet mit neuester Technik und besonderen Features (z.B. einem Multi-Touch Command-Screen und einem integrierten Tastaturauszug), ist die grandMA2 full-size in allen Einsatzbereichen zuhause. Das Pult bietet eine intuitive und schnelle Steuerung aller Fixtures und Kanäle. Außerdem sind dank des neu entwickelten grandMA2 faderwings bis zu 60 zusätzliche Executor-Motorfader verfügbar und für eine nahezu unbegrenzte Seitenzahl einsetzbar.
Darüber hinaus ist die grandMA2 full-size in der Lage, Showfiles von „Serie 1“-Pulten zu lesen und sogar im „Serie 1“-Modus zu arbeiten. Damit sind die grandMA2 Pulte vollständig mit der „Serie 1“ kompatibel. Um die Arbeit noch einfacher zu gestalten, befinden sich alle Bedienelemente bei jedem Pultmodell der neuen Serie an gleicher Stelle – ein Umdenken ist nicht mehr notwendig. Mit der grandMA2 bieten sich höchst flexible und komfortable Programmiermöglichkeiten inklusive einer nahezu unbegrenzten Zahl an Presets, Cues, Seiten, Sequenzen und Effekten.

Features
65.536 Parameter pro Session in Verbindung mit MA NPUs (entspricht 256 DMX-Universen)
8.192 HTP-/LTP-Parameter (6 x DMX-Ausgänge)
3 interne TFT-Wide-Touchscreens (15,4” WXGA)
2 externe TFT-Bildschirme anschließbar (UXGA, können Touchscreens sein)
1 interner Command-Screen – Multi-Touch (9” SVGA)*
30 Executor-Motorfader
Integrierter Tastaturauszug*
Eingebaute unterbrechungsfreie Stromversorgung (USV)
2 Ethercon-Anschlüsse
5 USB 2.0 Anschlüsse
Motorisiertes Monitor-Wing*
2 motorisierte A/B-Fader 100mm
Individuell hinterleuchtete und individuell dimmbare, geräuschlose Tasten;
Optional mit zwei externen Bildschirmen

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=144&productgroup=27&productgroupmain=4

MA LIGHTING grandMA1 micro

MA LIGHTING

The grandMA micro is the smallest console in the product family.
A colour touch screen display, ten manual faders, 10+20 executor buttons (on 128 pages), 1,024 DMX channels, free visualisation software and support for a remote control make the grandMA micro the perfect entry-level console, as it uses the same syntax and many of the same windows and menus as the larger consoles.
Even though it doesn't offer networking features like multi-user, channel expansion or tracking backup, its compact size and highly competitive price allows the use of a grandMA control system in environments that are not normally associated with first-class control systems.

Features
Real-time control for 1,024 DMX channels
Software compatibility within the grandMA family
Extensive PC-compatible software is available free of charge; including remote and 3D visualizer modules;
Connection of grandMA remote, grandMA 3D and grandMA video
1.024 HTP or LTP parameters
1 internal, high-resolution, color TFT touch screen
10 faders, 10+20 executor keys (on 128 pages)
Uniform software for cross-console compatibility: one system - one operating philosophy;
Free configuration for any application: theatre, TV, concert touring, entertainment etc.
Comfortable programming and control of moving lights, dimmers, LEDs, effects and video

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=149&productgroup=27&productgroupmain=4

MA LIGHTING Lightcommander 12/2

MA LIGHTING

Lightcommander 12/2 light mixing console, console version

Single channels
12 or 24 channels (WIDE), controllable via slider
1 or 2 presets with flash button per channel
2 additional switching channels for fog machines etc.

Memories
12 memory controllers with flash buttons
Flash buttons Add / Swop switchable
120 real level memories (10 memory banks)
Preview of Memories and Chasern

Master functions
Menu navigation via LCD screen
Documentation of the individual operating steps
Live and blind programming and modification
Swop-disable and dimmer curve selectable per channel
Channel doubling in wide mode

Running light effects
99 programs with up to 9000 steps in total
5 chasers run simultaneously with different clock speed >br> Fade time freely selectable
Learn-Speed button for direct input of the chaser cycle

Burglar-proof cross-fading
Manual X-fade or autofade time adjustable via controller
Recall of pre-programmed program sequences via Go button

Other
Master-Slave function and MIDI
Storage of programs on memory card (32 Kbyte)
Sound-to-light control (bass/middle/treble/pause) on memories and chaser
Audio input galvanically decoupled
remote controlled Go button

Technical data
Digital output DMX 512 5-pin XLR
MIDI IN/OUT
Desk lamp 3-pin XLR
Dimensions (W x H x D) 530 x 90 x 340 mm
Weight 8 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=153&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 Processing Unit XL

MA LIGHTING

The grandMA3 processing unit is designed for rack mounting and with only 2U it is perfect for efficient touring use.

Each model is equipped with eight DMX outputs for frame-synchronous DMX output in a network. Additional frame-synchronous DMX outputs can be provided by grandMA3 xPort Nodes.
The grandMA3 processing unit offers a perfect system overview via the integrated touch screen. This easy access to the most important functions allows an optimal monitoring of the rack-mounted devices, while any function can be checked from within the grandMA3 session.
In large systems it is recommended to position the grandMA3 processiong unit at a central location and use it for parameter calculation. Further distribution and output of frame-synchronous DMX data should be done by grandMA3 xPort Nodes.

Parameter 16.384 (HTP/LTP)
Parameter Mode 2 4.096 (HTP/LTP)

Technical data
Operating voltage/ supply voltage 100-240V, 50/60Hz
Power max. 200VA
Operating temperature 0 °C to 40 °C / 32 °F to 104 °F
Dimensions 482 x 372 x 87 mm / 19 x 15 x 4 in (width x depth x height)
Weight 5 kg / 12 lbs
Connectors:
1 x powerCON TRUE1
2 x etherCON/RJ45
8 x DMX512-A Out (5pin XLR female)
3 x USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1442&productgroup=27&productgroupmain=4

MA LIGHTING grandMA1 light

MA LIGHTING

Essentially the grandMA light is a compact version of the grandMA full-size console.

A color touch screen, connection of two external monitors, ten motorized faders, 30+20 executor keys (on 128 pages), an uninterruptible power supply and 2,048 DMX channels that can be expanded to 4,096 DMX channels with an upgrade chip make this console a professional environment for any console programmer.
The only difference is the compact size.
Ideal as a backup console to the big grandMA, the grandMA light is a powerful console that can be carried comfortably by one person.
Additional tools available are the free visualization software grandMA 3D, support for up to six remote controls and circuit expansion to 16,384 parameters using additional hardware - the NSP.
A grandMA light has much more to offer than its name suggests.
Real-time control for up to 64 DMX lines/ 16,384 parameters (expansion mode) Extensive network functionality including multi-user, backup, circle expansion, remote control etc.

Features
2,048 HTP or LTP parameters (4,096 optional) in stand-alone operation
1 internal, high-resolution, color TFT touch screen 2 external SVGA connectors 10 Motor fader 30+20 executor keys (on 128 pages) Built-in uninterruptible power supply
Uniform software for cross-console compatibility: one system - one operating philosophy;
Free configuration for any application: theatre, TV, concert touring, entertainment etc.;
Comfortable programming and control of moving lights, dimmers, LEDs, effects and video

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=148&productgroup=27&productgroupmain=4

MA LIGHTING grandMA1 full-size

MA LIGHTING

Light desk for moving as well as conventional light in elaborate shows.

Properties
3 touchscreens
2 external monitors can be connected
Real-time control for up to 64 DMX lines / 16,384 parameters (Expansion Mode);
2,048 HTP or LTP parameters (4,096 optional) in stand-alone mode;
20 Motor faders
60+40 executor keys (on 128 pages)
Extensive network functionality including multi-user, backup, Circuit extension, remote control etc.

Features
4096 channels
Outputs: 64 DMX lines/ 16,384 parameters (expansion mode)
3 x high resolution, colored, 10,4\" Touch-Screen Monitors
Dimensions: 120 x 67 x 15 cm
Weight: 47 kg incl. keyboard and mouse

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=147&productgroup=27&productgroupmain=4

MA LIGHTING grandMA NPU

MA LIGHTING

MA NPU (Network Processing Unit) bundles the computing power in the network and offers the same CPU speed as the grandMA2 consoles.

It processes 4,096 parameters.

The MA NPU is easy to operate thanks to its clear touch screen.
All important information is visible at a glance.
With eight DMX XLR5pin connectors on the rear panel the MA NPU offers a wide range of network applications.
The MA NPU is the link between the Ethernet world and DMX controlled end devices.
In addition, the MA NPU can also be used to solve other control tasks, whereby the best performance is achieved in the MA-Net2. For decentralized DMX networks, the MA NPU converts the incoming Ethernet data into DMX512-A data.
MA-Net2 and MA-Net are supported for the conversion of DMX data. Eight independent DMX ports, which can be configured as both DMX inputs and DMX outputs, output the data.
In a network, several consoles share the available MA NPU.
This makes it easy to share DMX-capable terminal devices.
Furthermore, redundant operation is possible without additional components such as DMX mergers. Each MA NPU connected to grandMA2 onPC allows the software to send "real" DMX data.
With this possibility grandMA2 onPC becomes a full-fledged lighting control system with up to 4.096 parameters.

Features
Real-time calculation for up to 65,536 parameters in the grandMA2 system network (corresponds to 256 DMX universes) ;
4,096 HTP/LTP parameters (8 x DMX outputs)
1 internal command screen (7")
PowerCon In and Out
1 Ethercon connection
4 USB 2.0 ports
Compatibility mode for grandMA "Series 1"
Weight: 9kg
Dimensions: 485 x 332 x 126mm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=150&productgroup=27&productgroupmain=4

MA LIGHTING DMX Booster/ Splitter 7 ways

MA LIGHTING

Properties
1 x DMX 5 pin in
7 x DMX 5 pin out
1 x DMX 5 pin through

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=189&productgroup=27&productgroupmain=4

MA LIGHTING 8Port Node

MA LIGHTING

The MA 8Port Node is the suitable solution if a large number of DMX universes are to be converted at the same location.

Likewise, the MA 8Port Node provides the same number of DMX outputs as the MA NPU (Network Processing Unit).
The eight DMX outputs and the main switch, a powerCON and etherCON connector, are located on the rear panel.
The MA 8Port Node is designed as a 19 inch/1RU built-in unit.

Technical data
Operating voltage/ supply voltage: 100V-240V, 50/60Hz
Power: 30VA
Dimensions: 482.5 x 43 x 189mm / 19 x 1.7 x 7.4inch
Weight (without packaging): 2.4kg / 5.3lbs
Connectors on output side: 8 x XLR 5pin (DMX), 1 x CTRL (future use), 1 x etherCON
Connectors on the input side: 1 x powerCON, 1 x USB

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=292&productgroup=27&productgroupmain=4

MA LIGHTING 4Port Node

MA LIGHTING

The MA 8Port Node, MA 4Port Node, MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) can be used to convert Ethernet data to DMX and vice versa

At the same time all products work with 1Gbit/s bandwidth. This allows them to seamlessly integrate into the grandMA2 system and its MA-Net2, which is based on this speed to ensure maximum performance.
All products are designed for everyday touring as well as for installations and are therefore equipped with a robust steel housing. In addition to a menu button, the nodes also have a USB port, a 2" colour TFT display and status LEDs for quick and easy configuration.
All MA xPort Nodes can be configured completely via a grandMA2 console or via grandMA2 onPC.
It is also possible to define how each individual DMX port should be used - whether as input or output.
In addition, the MA xPort Nodes are also available as onPC version, which allows to enable parameters for onPC workstations (more information under MA onPC Solutions).

The MA 4Port Node is the right solution if a medium number of DMX universes are to be converted at the same location. The standard version of the MA 4Port Node is available in a 9"/1U housing with the connectors on the back.
With the help of a special installation kit this version can also be installed in a 19" rack.
In addition, a cover is available that has all the rear connectors of the MA 4Port Node and can be placed on the side of the MA 4Port Node. In this way, the connections are also accessible from the front when the MA 4Port Node is installed in a rack.
As a further option, two MA 4Port Node can be connected to each other via special fasteners and thus installed in a 19" rack. Finally, there is the option to rig the devices using couplers or hooks.
The four DMX outputs, the main switch as well as a powerCON and etherCON connector are located on the rear panel.

Features
MA-Net2, Art-Net and sACN with 1Gbit/s
Completely configurable via grandMA2 consoles/grandMA2 onPC
2" color TFT display
Rugged steel housing for everyday touring or rigging
Mountings for the MA 2Port Node and MA 4Port Node available (see accessories);
Also available as onPC version for enabling output parameters (see MA onPC solutions)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=793&productgroup=27&productgroupmain=4

Mit dem MA 8Port Node, MA 4Port Node, MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) lassen sich Ethernet-Daten in DMX umwandeln und umgekehrt.

Gleichzeitig arbeiten alle Produkte mit 1Gbit/s Bandbreite. Damit fügen sie sich nahtlos in das grandMA2 System und sein MA-Net2 ein, das auf dieser Geschwindigkeit basiert, um eine größtmögliche Leistung sicherzustellen.
Alle Produkte sind für den Tour-Alltag, aber auch für Installationen konzipiert und daher mit einem robusten Stahlgehäuse ausgestattet. Neben einem Menü-Knopf verfügen die Nodes für eine einfache und schnelle Konfiguration auch über einen USB-Anschluss, ein 2" Farb-TFT-Display und Status-LEDs.
Alle MA xPort Nodes lassen sich vollständig über ein grandMA2 Pult oder über grandMA2 onPC konfigurieren.
Dabei lässt sich ebenfalls festlegen, wie jeder einzelne DMX-Anschluss genutzt werden soll – ob als Ein- oder Ausgang.
Darüber hinaus sind die MA xPort Nodes auch als onPC Version erhältlich, mit deren Hilfe sich Parameter für onPC Arbeitsplätze freischalten lassen (mehr dazu unter MA onPC Solutions).

Der MA 4Port Node ist die passende Lösung, wenn eine mittlere Anzahl von DMX-Universen an örtlich gleicher Stelle gewandelt werden soll. Als Standardversion gibt es den MA 4Port Node in einem 9"/1HE Gehäuse mit den Anschlüssen auf der Rückseite.
Mit Hilfe eines speziellen Einbau-Kits lässt sich diese Version auch in ein 19" Rack einbauen.
Zusätzlich ist eine Blende erhältlich, die alle rückseitigen Anschlüsse des MA 4Port Node besitzt und seitlich an diesen gesetzt werden kann. Auf diese Weise sind beim Rack-Einbau des MA 4Port Node die Anschlüsse auch von der Vorderseite zugänglich.
Als weitere Möglichkeit lassen sich zwei MA 4Port Node miteinander via spezieller Befestigungen verbinden und so in ein 19" Rack einbauen. Abschließend besteht die Option, die Geräte mithilfe von Couplern oder Haken zu riggen.
Die vier DMX-Ausgänge, der Hauptschalter sowie ein powerCON und etherCON Anschluss sind auf der Rückseite untergebracht.

Features
MA-Net2, Art-Net und sACN mit 1Gbit/s
Vollständig über grandMA2 Pulte/grandMA2 onPC konfigurierbar
2" Farb-TFT-Display
Robustes Stahlgehäuse für den Tour-Alltag oder zum Riggen
Befestigungen für den MA 2Port Node und MA 4Port Node erhältlich (siehe Zubehör);
Auch als onPC Version zur Freischaltung von Ausgabeparametern verfügbar (siehe MA onPC solutions)

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=793&productgroup=27&productgroupmain=4

MA LIGHTING 2Port Node onPC Pro

MA LIGHTING

As a special feature, the MA 2Port Node onPC, in stand-alone operation with grandMA2 onPC, offers the possibility to output 512 DMX parameters (1,024 in case of the MA 2Port Node onPC PRO).

This makes the MA 2Port Node onPC a powerful tool for smaller applications.
It also offers a practical back-up for smaller budgets.

The MA 2Port Node onPC versions have an integrated power supply, but can also be powered via Ethernet.

All MA 2Port Nodes onPC are fully integrated into the MA system. This means they are easy and comfortable to set up via a console or grandMA2 onPC. But they can also be used in other systems because they speak MA-Net2, MA-Net, sACN and Art-Net, which can be set remotely.

Rigging box for flexible use in trusses or mobile facilities;
MA 2Port Node onPC in combination with grandMA2 onPC
Powerful controller for smaller applications
Handy emergency system for smaller budgets
512 parameters (MA 2Port Node onPC) or 1,024 parameters (MA 2Port Node onPC PRO);
DMX input for fader/console extensions and merging of DMX signals;
Integrated into the MA system via MA-Net2/MA-Net
Stand-alone use with any MA-Net2, sACN system or Art-Net system;
Power supply via Ethernet or internal power supply unit
Simple and convenient remote configuration including determination of inputs and outputs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=151&productgroup=27&productgroupmain=4

LUMENRADIO CRMX Nova TX DMX, Wireless TM

LUMENRADIO

Function: wireless DMX transmitter
Wireless modes: Transmitter
Frequency band: 2.4 GHz
Adaptive frequency hopping: Yes
Transmission/reception power: 10, 50, 100, 300 mW selectable Max.
Radio range: approx. 500 m
RDM feedback: No
W-DMX Compatible: No
Power over Ethernet: Yes** depending on environment (terrain, buildings, people)

Control & Programming
ProtocolUSITT DMX-512DMX
512 channels 512 (1 DMX line)
Menu display: Various status LEDs
DMX 512 connection
1x XLR 5 pin female
EtherNet-(network connection): no
Antenna connection 1x TNC male
USB connection: No

Technical data
Internal power supply (external) Mains voltage 85-264 V 47-70 Hz (12 V DC);
Power consumption 0.015 A (0.5 A)

Housing
Material anodised extruded aluminium profile
Colour black
Housing protection class: IP 20

Dimensions/weight
Dimensions: (L x W x H)11.0 x 4.4 x 16.0 cm
Weight: 0.7 kg
Mounting: Desktop/T-threaded bolt M8 for hook/clamp

Special features
"One-button operation"
Field strength display
Adaptive frequency hopping
Co-Existence to all standard 2.4 GHz products
DMX error correction
DMX Frame Rate & Size Auto Sensing
Lock function
Firmware Upgrade via XLR interface
ESD-protected interfaces
Self-resetting mains fuse
Internal power supply unit
Reverse polarity protected 12 V DC input
T-threaded bolt M8 for hook/clamp

Accessories included
Power cable for cold appliances
1x antenna RP-TNC 2 dBi
DC connector male
T-threaded bolt M10

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=188&productgroup=27&productgroupmain=4

LLT DMX-Splitter/Merger SMS 28 ARTNET

LLT

The SMS 28 is a magician with DMX signals and combines functions for which one would otherwise need several devices in a compact 1U - 19\\\" housing.

The plug-in unit has 2 DMX inputs and 8 galvanically isolated and buffered outputs, a display, mode selector switch and a 3-digit DMX channel selection.
The power supply can be used worldwide for voltages between 90 and 240VAC. XLR connectors can be mixed and matched in 3p or 5p.

Also available are RJ45 connectors in a uni-flange housing.

Many functions that can be selected via a selector switch are available:
Conventional splitter 1 in 8 with backup function (last received data is output)
Conventional splitter for 2 lines of 4 outputs each with backup merge 2 in 1 HTP: The highest value of both DMX lines is used;
Merge 2 in 1 LTP-A: If line A fails, the system switches to line B
Merge 2 in 1 LTP-B: If line B fails, the system switches to line A
Merge 2 in 1 Shift: Line B is appended to line A. The channel where the merge starts is adjustable The sum signal of all merge functions is available at outputs 1-8
Split & Shift: The signal of line A is output at outputs 1-4 in the original, at 5-8 line A is output from channel X starting with 001, where X is adjustable. All channels before X are omitted. In this way, 2 systems can be fed with one DMX line even if one of the systems cannot be configured differently than starting at 001.

The Artnet version of the SMS 28 can be recognized by a network connector on the front.
It receives two DMX universes A and B and treats them in the same way as if they were DMX signals at inputs A or B.
DMX functionality is fully maintained, Artnet signals have priority over DMX and automatically switch the unit to Artnet mode. A reset button on the front panel sets the Artnet processor to factory default with a known IP address (IPV4).
The respective MAC address is specified on the device.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=303&productgroup=27&productgroupmain=4

Der SMS 28 ist ein Zauberkünstler mit DMX-Signalen und vereinigt Funktionen, für die man sonst mehrere Geräte bräuchte, in einem kompakten 1HE - 19\\\" - Gehäuse.

Der Einschub besitzt 2 DMX-Eingänge und 8 galvanisch getrennte und gepufferte Ausgänge, ein Display, Betriebsartenwahlschalter und eine 3-stellige DMX-Kanal-Auswahl.
Das Netzteil ist weltweit verwendbar für Spannungen zwischen 90 und 240VAC. XLR-Steckverbindungenn können beliebig gemischt in 3p oder 5p verbaut werden.

Außerdem lieferbar RJ45-Steckverbinder im Uniflansch Gehäuse.

Viele Funktionen, die über einen Wahlschalter gewählt werden können, stehen zur Verfügung:
Herkömmlicher Splitter 1 in 8 mit Backup-Funktion (zuletzt empfangene Daten werden ausgegeben)
Herkömmlicher Splitter für 2 Linien zu je 4 Ausgängen mit Backup Merge 2 in 1 HTP: Der jeweils höchste Wert der beiden DMX-Linien wird verwendet;
Merge 2 in 1 LTP-A: Fällt Linie A aus, wird auf Linie B umgeschaltet
Merge 2 in 1 LTP-B: Fällt Linie B aus, wird auf Linie A umgeschaltet
Merge 2 in 1 Shift: Linie B wird an Linie A angehängt.

Der Kanal, bei dem die Zusammenführung beginnt, ist einstellbar Das Summensignal aller Merge-Funktionen steht an den Ausgängen 1-8 zur Verfügung
Split & Shift: Das Signal der Linie A wird an den Ausgängen 1-4 im Original ausgegeben, an 5-8 wird Linie A ab Kanal X beginnend mit 001 ausgegeben, wobei X einstellbar ist. Alle Kanäle vor X entfallen. Auf diese Weise lassen sich 2 Systeme auch dann mit einer DMX-Linie speisen, wenn eines der Systeme nicht anders als bei 001 beginnend konfigurierbar ist.

Die Artnet-Version des SMS 28 ist an einem Netzwerkstecker frontseitig zu erkennen.
Sie empfängt zwei DMX-Universen A und B und behandelt diese ebenso, als wären es DMX-Signale an den Eingängen A bzw. B.
Die DMX-Funktionalität bleibt voll erhalten, Artnet-Signale haben Vorrang vor DMX und schalten das Gerät automatisch auf Artnet-Betrieb. Ein Reset-Taster frontseitig setzt den Artnet-Prozessor auf Werkseinstellung mit einer bekannten IP-Adressen (IPV4).
Die jeweilige MAC-Adresse ist auf dem Gerät angegeben.

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=303&productgroup=27&productgroupmain=4

JB LIGHTING Licon FX

JB LIGHTING

Independent mixing console for 96 dimmer channels

Perfect handling due to 48 sliders that can be configured as both channel and scene faders.
The Licon FX is also a fader extension that can be coupled with the Licon 1X and Licon 1.

A total of 48 faders distributed over 4 banks of 12 sliders each are available, allowing the operator to access all Licon 1X dimmer banks simultaneously.
The Licon FX is designed in such a way that it can also be used as a stand-alone lighting control desk for 48 channels.

Properties
Fader extension for Licon 1 and Licon 1X, or light control desk for 48 channels;
Up to 48 preset faders in direct access, 16 of which can be assigned to chases;
Chase-Control section for fast direct access to chase parameters
MIDI capable
Graphic LCD display
Data backup to USB memory stick

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=155&productgroup=27&productgroupmain=4

JB LIGHTING Licon 1

JB LIGHTING

Up to 32 moving lights can be controlled with a maximum of 25 control channels and 7 fixed value channels.

Additionally you have access to 96 conventional DMX channels. The moving lights are controlled by direct selection of the individual spotlights and the corresponding parameters. The buttons are labelled to make it easy for even untrained users to keep track of the system.
Since sequences and chases can be created using presets, fast and effective programming is possible. In addition, the console has an effect generator that allows chases to be programmed using pre-programmed matrices, allowing effective sequences to be created in seconds.

At any time during a program sequence, individual fixtures or groups of fixtures and their parameters, as well as the run time, can be accessed. The console can be synchronized via MIDI and SMPTE or music from outside and it is possible to link several mixing consoles to multiply the number of control channels.
With the integrated CD-ROM drive, shows can be programmed to a standard or self-burned music CD, which then runs music-synchronously without additional peripheral devices such as time code clock. 4 AUX controllers are available for controlling additional DMX devices such as fog machines

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=154&productgroup=27&productgroupmain=4

H.E.S. USB DMX Super Duper Widget

HIGH END SYSTEMS

Packed in a slim 19-inch rack-mountable enclosure, the DMX Super Duper Widget offers 8 DMX 512 universes via XLR 5-pin connectors to expand Hog 4 OS consoles (except Road Hog 4, which only allows 4 universes) and Hog 4PC with an additional 8 DMX universes.

In conjunction with Nano Hog 4, Playback Wing 4 and Master Wing 4, users can configure additional powerful control solutions.

Hog 4 PC users can also unlock 8 DMX universes via Art-Net and E1.3.1 (sACN) by connecting a DMX Super Duper widget.

Technical data
USB connection with Hog 4, Full Boar 4, Road Hog 4, Hedge Hog 4 series and Hog 4PC;
Output of up to 4096 DMX channels
Comprehensive status message via LEDs
8 x XLR 5pin DMX, 1 x USB-B High quality aluminium panel with abrasion resistant printing;
19″ 1U unit for mounting in a rack
Kensington anti-theft protection
Compatible with Hog 4, Full Boar 4, Road Hog 4, Hog 4 PC, Wholehog 3, Road Hog Full Boar, Hog iPC and Hog 3 PC

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1558&productgroup=27&productgroupmain=4

H.E.S. Hog Playback Wing 4

HIGH END SYSTEMS

The Playback Wing 4 with its evolutionary styling is as much at home next to a console as it is as a controller of a Hog 4PC system.

This enables an attractive and reliable operation. A 15.6-inch widescreen dispaly with 10 finger multi-touch is integrated in the Master Wing 4.

Features
10 motorized playback masters
1 motorized Grand Master
USB connection to Hog 4, Full Boar 4, 4 and Road Hog Hog 4 PC
15.6-inch widescreen with Multi-Touch Super Widget
expansion slot socket for one Hog LED desklight, fully dimmable
1x desk lamp included in delivery
LED Desklight and Feedback LEDs dimmable
Status LEDs for Power, Data and Expansion
Two USB sockets
Fancy Road Hog 4 styling
Auto range mains connection (90-250VAC)
Dust protection included

Technical data
Main power: 100-250VAC, 50/60Hz, max 100W
Dimensions (WxDxH): 511.56x610.05x244.34mm
Weight: 12,51 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1557&productgroup=27&productgroupmain=4

H.E.S. Hog Master Wing 4

HIGH END SYSTEMS

The Master Wing 4 with its evolutionary styling is just as much at home next to a console as it is as a controller of a Hog 4PC system.

It uses the same high quality controls that are applied to the Hog 4 consoles.
This enables an attractive and reliable operation. A 15.6-inch widescreen dispaly with 10 finger multi-touch is integrated in the Master Wing 4.

Features
30 faderless Playback Master
USB connection to Hog 4, Full Boar 4, 4 and Road Hog Hog 4 PC
15.6-inch widescreen with multi-touch
Super Widget Expansion Slot
Base for one Hog LED desklight, fully dimmable
1x desk lamp included
LED Desklight and Feedback LEDs dimmable
Status LEDs for Power, Data and Expansion
Two USB sockets
Fancy Road Hog 4 styling
Auto range mains connection (90-250VAC)
dust protection included

Technical data
Main power: 100-250VAC, 50/60Hz, max 100W
Dimensions (WxDxH): 511.56x610.05x244.34mm
Weight: 12,33 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1556&productgroup=27&productgroupmain=4

H.E.S. Hog 4 Lighting Control System

HIGH END SYSTEMS

The Hog 4 is the flagship and heart of the new Hog 4 series.

Equipped with the latest technology, it is the successor to the award-winning Wholehog III.
Besides the 17" widescreen multi-touch screens, the motorized faders with separate grandmaster, the small touch screen in the control panel and the LCD keys are the special highlight of the console.

Three monitor outputs, eight built-in DMX outputs, MIDI in- and outputs, eight USB ports and 2 robust Neutrik Ethercon Fast Ethernet ports allow highest flexibility. So you are prepared for all cases, from the smallest industrial event with a single console to the biggest stadium show, theme park installations or Broadway shows.

Features
Newly developed Hog 4 operating software
Unlimited number of simultaneous crossfades
Two internal 17" widescreen touch screens with 10-point multi-touch
Three external monitors or touchscreens are supported
Five encoders for an extended wheel set
Twelve LCD user keys
Three-axis, backlit trackball with encoder for the third axis and four configurable buttons for cursor and position control;
10 motorized playback faders
A motorized Grand Master
Dedicated Intensity and Rate wheels
User assignable Jog Shuttle Encoder
48 soft keys for quick selection on the toolbar
Built-in DMX processor 8000
Hog-Net Ethernet Connection
Fixture-Net Ethernet connection
Integrated Keyboard
Internal hard disk
Internal CD/DVD drive
8 USB ports for Wholehog Wings and external touchscreens
Storage space under the armrest
Desk lights, feedback LEDs and integrated working light are dimmable
Auto-ranging power input (90-250VAC)
Light Converse Visualizer Dongle included
Dust cover included in the scope of delivery
Road Case included

Connectivity
Unlimited number of DMX channels via Ethernet DPs
Unlimited number of Art-Net and E1.3.1 (sACN) universes via Ethernet DPs Onboard MIDI input and output, MIDI show control and MIDI time code and LTC input
Multiple LTC inputs via optional multiple SMPTE / LTC USB Widget
Connectivity with multiple Visualizers via Ethernet possible
Wired and wireless network capability with multiple Wholehog console systems;
Remote Focus capabilities if you are networked to a Tablet PC running Hog 4PC software
Supports USB Playback and Expansion Wings

Dimensions and weight
With the screen facing down: W 102.87 cm, D 72.37 cm and H 16.48 cm
With the screen facing up: H 41.74 cm
Weight: 34 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1555&productgroup=27&productgroupmain=4

H.E.S. DMX Processor DP8000

HIGH END SYSTEMS

The DMX Processor 8000 extends the Hog product line with exceptional DMX processing capabilities.

Without compromising the high standards of Flying Pig Systems, durability, quality and innovation set new standards.

Properties
The DP8K provides the output power for Hog systems
16 DMX universes
Powerful processing of cross fades and effects
Local interface with LCD display and buttons for configuration DMX status and test equipment;
All functions can be configured remotely Firmware remotely upgradeable via network

Specifications
2.0 GHz Intel Dual Core processor with 1 GByte RAM and 1 GByte Flash Gigabit;
Ethernet Dual Ether-Con connections (Hog-Net and Art-Net)
White LED backlit graphic LCD display for graphical user interface
Extensive LED status feedback
Connectors: 8 x 5pin XLR, 1 x EtherCon for Hog-Net, 1 x EtherCon for Art-Net, 2 x USB-A;
Input voltage: 90-250 VAC
Lock IEC connection
Kensington Security Slot
Compatible with Hog 4, Full Boar 4, Road Hog 4, Hedgehog 4N/X, Hog 4PC, Wholehog 3, Road Hog Full Boar, Hog iPC and Hog 3PC

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1631&productgroup=27&productgroupmain=4

H.E.S Road Hog 4

HIGH END SYSTEMS

Road Hog 4 lighting console for automated luminaires, dimmer and multimedia controllers

Features
Stable Hog 4 software
A 22" widescreen multi-touch screen, for a large overview
Further external monitors or touch screens can be connected
Four encoders for parameter setting
Twelve assignable keys
Ten non-motorized faders
Four integrated DMX outputs (8 outputs possible via DMX and Art-Net)
Via DP 8000 DMX processor further DMX and Art-Net outputs possible;
Hog-Net Adapter
Fixture-Net Adapter
Solid State Hard Disk
Integrated CD/DVD drive
SMPTE/Midi via optional USB MIDI/LTC widgets
Five USB ports e.g. for wings and widgets
Roadcase optionally available
Road Hog 4 software data compatibility with all widgets and wings of the Wholehog III series;
Special User Kinds
Console Lock Function
Merged Library
OSC compatibility
Fast booting of the console
Hog 3 shows can be loaded into a Hog 4 console
Hog 4 shows are convertible to Hog 3 software 3.2.6, compatibility is given;
Installation from USB stick possible
Up to eight LTC/Midi widgets possible
Parameter Wheelsets easier and more freely configurable
All window contents can be printed as PDF and transferred to a computer via USB stick;
All four consoles are networkable and expandable with wings and widgets.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=348&productgroup=27&productgroupmain=4 Translated with www.DeepL.com/Translator (free version)

ELC dmXLAN switch8LX

ELC

The dmXLAN switch8LX was specially developed for live entertainment applications where a mixture of data protocols would overload and saturate commercially available network switches.
The ELC switches form the backbone of the network distribution system. Set up fast redundant loops with error reporting.
8 Cat5 ports with speeds up to 100 Mbps, ports 1 & 2 with optional dual mode ports ﬁberoptic.

Properties
8x 10/100Mbps network connections
Supported by the software dmXLAN V4
Art-Net and MA-Net filtering dmxLAN

Software download from ELC Lighting:
https://www.elclighting.com/products/dmxlan-v4/

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1635&productgroup=27&productgroupmain=4

ELC dmXLAN node8GB Fi

ELC

The ELC dmXLAN node8GB is another variant of the largest DMX/Ethernet node series.

It offers 8 bidirectional 5pin XLR female connectors which can be used as DMX outputs, DMX inputs or DMX outputs with RDM.
The Ethernet connection is established via 2x 10/100/1000 mBit connectors (Ethercon), which can be used simultaneously as they are connected via an internal switch.
The ELC dmXLAN node8GB is fully compatible with the free dmXLAN software. This enables e.g. merging into LTP, HTP or Priority as well as a soft patch.
Device parameters can be controlled remotely 02x network10/ 100/1000Artnet 08x DMX Out or DMX In dmxLAN

Software download from ELC Lighting:
https://www.elclighting.com/products/dmxlan-v4/

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1634&productgroup=27&productgroupmain=4

DMX Splitter 4 MKII 19"

STAIRVILLE

1 x DMX 3 and 5 pin in
4 x DMX 3 and 5 pol out

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=187&productgroup=27&productgroupmain=4

DMX Splitter 4 for truss mounting

STAIRVILLE

Properties and scope
1 x DMX 3 and 5 pin in/ out
4 x DMX 3 and 5 pol out
incl. Schuko Powercon mains cable
incl. single clamp 30mm/ 200kg M10, black
incl. Safety

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=186&productgroup=27&productgroupmain=4

BOTEX DMX Recorder DR-512

BOTEX

With the DR-512, DMX data can be recorded and connected in a simple way. At the push of a button, up to 4 sequences can be recalled.
For your large projects and for data storage, the non-volatile 1MB memory can be expanded with an optional 32MB CF memory card (code 11271).

Properties
Professional DMX recorder has access to memory and CF card
4 sequences (l04-l04) + startup + shutdown available on the Memorycard
33 sequences (E01-E33) available on the CF Card
PLAY, PAUSE and STOP functions
Manual / Autostart / DMX monitor / DMX trigger / Program / Setup mode
24 / 25 / 30 frames SMPTE signal available
Exclusive 32 MB CF Card
Remote controllable PLAY, STOP and RECORD function
2 x 16 digit display

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=185&productgroup=27&productgroupmain=4

VMB Forklift TL A320

VMB

The TL-A320 is the large Line Array Lift of the VMB TL-A series.
Due to the patented ALS (autolock security system) a high degree of security is guaranteed.

Technical data
Max. height: 6 m
Max. load capacity: 320 kg
Working area: 2.25 x 2.15 m
Height: 1.98 m
Weight: 184 kg
Cable winch: 1200 kg
Fork cross section: 50x50 mm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=263&productgroup=26&productgroupmain=3

MANFROTTO Windup 087

MANFROTTO

Lamp tripod consisting of 3 sections with 2 pull-out sections

Technical data
Crank centre column, both drawers are extended simultaneously
Max. height: 3.70 m
Footprint Diameter of the stand base 1.28 m
Min. height: 1.67 m
Transport height 1.81 m
Max. load: 30 kg
Max. load at 6º inclination: 30 kg
Recording possibility: Mini or normal TV cone
Material: galvanized steel
Own weight: 21.4 kg
Colour: black or silver

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=143&productgroup=26&productgroupmain=3

MANFROTTO Autopole (432-3,7B)

MANFROTTO

Technical data
Weight: 2.2 kg
Clamping range: 2.1 m - 3.7 m
Colour: Black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=318&productgroup=26&productgroupmain=3

MANFROTTO Autopole (432-2,7B)

MANFROTTO

Technical data
Clamping range: 2.1 to 2.7 m
Weight: 2,20 kg
Colour: Black

GENIE ST 25 Super Tower

GENIE INDUSTRIES

Technical data
Working height: 7.95 m
Payload: 295 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=142&productgroup=26&productgroupmain=3

GENIE SLC 24

GENIE INDUSTRIES

Technical data SLC24
Height (folded): 218 cm
Width: 80 cm
Width - boom folded down: 168 cm
Length - legs folded up: 70 cm
Length - in working position: 193 cm
Ground clearance: 5.8 cm
Own weight: 170 kg
Working height forks bottom: 678 cm
Working height forks top: 732 cm
Payload: 300 kg with a load centre fork inner side up to 36cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=140&productgroup=26&productgroupmain=3

GENIE SLC 18

GENIE INDUSTRIES

The Genie Superlift Contractor (SLC) is a stable, yet lightweight and portable hoist.

Technical data SLC18
Height (folded): 218 cm
Width: 80 cm
Width - boom folded down: 168 cm
Length - legs folded up: 70 cm
Length - in working position: 173 cm
Ground clearance: 5.8 cm
Own weight: 139 kg
Working height forks bottom: 511 cm
Working height forks above: 564 cm
Payload: 300 kg with a load centre fork inner side up to 36 cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=139&productgroup=26&productgroupmain=3

GENIE SL 25

GENIE INDUSTRIES

Technical data SL 25
Working height: 794 cm
Payload: 295kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=141&productgroup=26&productgroupmain=3

ALP Passenger lift PHC 940

ALP

Model PHC 940 EU1

Technical data
Working height: approx. 9.45 m
Platform height: approx. 7.45 m
Payload: max. 140 kg
Own weight: approx. 309 kg
Overall height: 1.98 m
Transport dimensions: 1.98 x 0.77 x 1.32 m (H/W/L)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=472&productgroup=26&productgroupmain=3

ALP Lift LMC 620, Double-crank winch

ALP

Technical data
Lifting height, top load fork 6,190 mm
Lifting height, load fork below: 5.800 mm
Load capacity: 250 kg
Length load fork: 650 mm
Chassis length: 1,725 mm
Chassis width: 760 mm
Width of chassis incl. outrigger: 1,420 mm
Mast height: 1.600 mm
Transport length: 780 mm
Transport width: 760 mm
Dead weight (without jib): 153 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=396&productgroup=26&productgroupmain=3

ALP Lift LMC 600, double crank winch

ALP

ALP Lift LMC 600 with double crank winch

Technical data
Load capacity: max. 250kg
Lifting height: fork bottom 5,90m, fork top 6,29m
Own weight: 139 kg
Transport height: 1.89 m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=293&productgroup=26&productgroupmain=3

8 channel motor controller

ULTRALITE

Specifications

Power supply line: CEE32A / 400V
for 3-phase AC motors up to 1.0 KW
Rotary field detection left/right field with lights red / green
Visual indication of the 3 phases of the mains supply
Motor protection switch with rotary switch per channel
Trigger current adjustable
Electrically interlocked reversing contactors
Separate contactors for "emergency stop" and "drive"
Tamperproof emergency stop buttons
Device output via 16pin standard multi-pin plug
Changeover switch for individual direction of rotation adjustment per motor on the rear of the device;

Integrated protection circuits: (immediate shutdown) - failure of a mains phase - tripping of any motor protection switch - actuation of the emergency stop buttons

Link operation: coupling of up to 4 motor controls via LINK cable possible - important functions such as emergency stop or start button are then shared;

Manual control in standard industrial housing - yellow signal colour - integrated emergency stop button - suspension device as standard - motor preselection switch with 3 switch positions UP / 0 / DOWN - start button and display "ready for operation" (OK) - 15 m cable with robust multi-pin plug, lockable

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=126&productgroup=24&productgroupmain=3

1 channel motor controller direct

ULTRALITE

Control for 1 motor for setup operation

Technical data
Travel direction switch
Emergency stop
Current limitation
Input 16A CEE / 400V
Output 1x 16A CEE / 4 pol

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=128&productgroup=24&productgroupmain=3

4 channel motor conroller

ULTRALITE

Technical Data
Feed-in 16A/ 400V
Output 01 x Harting 16 pol
incl. manual control unit and end plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=125&productgroup=24&productgroupmain=3

LLT 4 channel motor controller

LLT

Motor controller for 4 motors

Technical data
Power supply 32A/ 400V
01x Harting 16 pol output
Rotary field display
Master-Slave connection
Emergency shutdown
Auto detection of the phase position and switchover
incl. 2x end plugs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=395&productgroup=24&productgroupmain=3

LLT 8 channel motor controller

LLT

Motor controller for 8 motors

Technical data
Power supply 32A/ 400V
02x Harting 16 pol output
Rotary field display
Master-Slave connection
Emergency shutdown
Auto detection of the phase position and switchover
incl. 2x end plugs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=129&productgroup=24&productgroupmain=3

LLT 32 channel motor controller

LLT

LLT 32-channel motor controller in case for 32 motors up to 1.5 kW consisting of:

4x LLT 8 channel motor controller ( up to 6,3A contactor ) 50/ 60 Hz
1x STV 125A IN -> 4x32A
1x 32 channel control panel
1x manual control with Go/Not Off
1x desk lamp
2x end plug 6pol
1x end plug 5pin manual control

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=130&productgroup=24&productgroupmain=3

LITEC 2 channel direct motor controller

LITEC

Control for 2 motors for setup operation

Technical data
Travel direction switch
Emergency stop
Current limitation 2CH x 5A
Input 16A CEE / 400V
Output 2x 16A CEE / 4 pol

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=127&productgroup=24&productgroupmain=3

TRALIFT Manual chain hoist 1.0to - 08m

TRALIFT

Technical data
Load capacity: 1000 kg
Lifting height: 8 m
Hand chain: 14 m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=124&productgroup=23&productgroupmain=3

TRALIFT Manual chain hoist 0,5to - 10,0 m

TRALIFT

Technical data
Load capacity: 500 kg
Lifting height: 10m
Hand chain: 18 m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=123&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 500kg 36m

MOVECAT

MOVECAT PLUSlite 500

Technical data
Load capacity: 500 kg
Chain: single strand chain chain hoist to D8 Plus /igvw SQ P2 400 V, 3Ph, 50Hz, direct control;
Chain length: 36m stroke
Lifting speed: 4m/min.
Chain box: KS 724 incl. chain (K7022 according to EN 818-7 DAT) galvanized (silver);
Dimensions: 440 x 343 x 234 mm ( Lx W x H)
Use in overhead and standard mounting position without conversion;
Patented slipping clutch as overload protection
Permanent force and form closure in the load line
Braking system: two independent DC brakes with current switch;
1 Basicplate
2 handles
1 chain load hook
1 single hole suspension eyelet
1m connection cable with CEE 16/4 plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=736&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 500kg 50m

MOVECAT

MOVECAT PLUSlite 500

Technical data
Load capacity: 500 kg
Chain: single strand chain chain hoist to D8 Plus /igvw SQ P2 400 V, 3Ph, 50Hz, direct control;
Chain length: 50m stroke
Lifting speed: 4m/min.
Chain box KS 724 incl. chain (K7022 according to EN 818-7 DAT) galvanized (silver)
Dimensions: 440 x 343 x 234 mm ( Lx W x H)
Use in overhead and standard mounting position without conversion
Patented slipping clutch as overload protection
Permanent force and form closure in the load line
Braking system: 2 independent DC brakes with current switch
1 Basicplate
2 handles
1 chain load hook
1 single hole suspension eyelet
1m connection cable with CEE 16/4 plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=737&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 500kg 24m

MOVECAT

Electric chain hoist, D8 plus, SWL 500 kg 4 m/min

Technical data
Load capacity: 500 kg
Lifting speed: 4 m/min
Chain length: 24 m
Load trains: 1
Motor power: 0,75 kw
Load chain: 7 x 22 mm
Independent brakes: 2

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=121&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 320kg 24m

MOVECAT

MOVECAT PLUS-C 320-4HE-21 (DC)

Chain hoist to D8 Plus igvw /DIN 56950-11:05-2012 with safety factor dyn.8:1 (chain), only single-fall operation possible.

Load capacity: 320 kg (single strand chain)
Lifting speed: 4m/min
Lifting height: 24m
Operating voltage: 380-415 V/3 Ph /50 Hz
Control: direct control 380-415 V AC
Motor power: 0,18 KW
Duty cycle: 40%
Suspension chain: chain load hook, black
Motor suspension: single-hole suspension eyelet
Operating mode: Use in overhead and standard mounting position
Braking system: 2 independent DC brakes with brake booster protection
Overload protection: patented slip clutch, positive connection between load and brakes;
Chain type: 24.4m K5215 (EN 818-7 DAT)
Chain box: KS 5225
Equipment: 2 handles ( overhead operation )
Connection cable: 1m H07RN-F with CEE 16/4 cable plug black, cable entry with strain relief and 360° bend protection
Weight : 34,5 KG (76 lbs) with 24,4m chain
Dimensions: 460x240x265mm (LxWxH) without chain box and connection cable

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=356&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 250kg 18m

MOVECAT

Electric chain hoist, D8 plus, SWL 250kg 4m/min

Technical data: Load capacity 250kg
Lifting speed: 4m/min
Chain length: 18m
Load trains: 1
Engine power: 0,37kw
Load chain: 5,2 x 15mm
Independent brakes: 2
Protection class: IP 54
Dimensions: 45,5 x 24 x 17cm

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=120&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 2500kg 2 rope 36m

MOVECAT

Electric chain hoist, D8 Plus SWL 2500kg

Load capacity: 2500 kg
Lifting speed: at 50 Hz approx. 4 m/min
Lifting height: 36m
Number of load trains: 2
Motor power: 3.0 kW, 6.15A, cos phi 0.85
Weight: 298kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1430&productgroup=23&productgroupmain=3

EUROTRUSS FD33 black

EUROTRUSS

EUROTRUSS FD33 black
Manufacturer: Eurotruss

Eurotruss three-point truss - Colour: black

side length 290mm
Truss height 258mm
Pipe diameter 50mm
Pipe diameter diagonal 20mm
Wall thickness 2mm
Weight approx 5,5 kg/m

different lengths available:

Art.no. Description
25569 Eurotruss FD33 0,21m black
20846 Eurotruss FD33 0,25m black
18529 Eurotruss FD33 0,29m black
18530 Eurotruss FD33 0,50m black
18526 Eurotruss FD33 1,00m black
20847 Eurotruss FD33 1,50m black
18527 Eurotruss FD33 2,00m black
18528 Eurotruss FD33 3,00m black
26278 Eurotruss FD33 Corner 120º 50/50 black, tip point top
20242 Eurotruss FD33 corner 90º 50/ 50 black, tip point top
20243 Eurotruss FD33 T-piece 50/50 black, tip point top
21246 Eurotruss FD33 X-piece 50/50 black, tip point top

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=250&productgroup=33&productgroupmain=2

LITEC FX30S silver

LITEC

LITEC FX30S silver
Manufacturer: Litec

Litec two-point truss >br>
side length 291mm
Pipe diameter 50mm
Pipe diameter diagonal 18mm
Wall thickness 2mm

different lengths available:
Art.no. Description
1006 Litec FX30 050 0,5m
11675 Litec FX30K2 Bone
1011 Litec FX30K4 Dado
1007 Litec FX30S100 1,0m
17194 Litec FX30S150 1,5m
1008 Litec FX30S200 2,0m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=100&productgroup=32&productgroupmain=2

EUROTRUSS JT20 Silver

EUROTRUSS

A new specific carbon black conductor has been added to the Eurotruss product range.

The JT20 is designed for low heights such as studios and exhibition stands. The truss consists of a 50x3mm main tube built with the standard conical connector and with a height of only 195mm it is the perfect truss for vertical loads in low height areas.

Corner Blocks allows you to build matrix frames and the horizontal pin position ensures quick and easy assembly.

Manufactured with the quick connection system and approved according to DIN EN 1999-1-1 & 1999-1-1/A2 (Eurocode 9).

Low overall height
Massive strong main pipe & standard CS1-CON
Horizontal pin position, which facilitates and secures the installation
Universal corner block system that allows you to go in all directions.
Only 195mm high! TECHNICAL DATA
Height 195 mm / 7.7 in
width 50 mm / 1.9 in
Main pipe 50 x 3 mm / 1.9 x 0.12 in
Braces 50 x 3 mm / 1.9 x 0.12 in
Weight ~3kg/m / ~2.0 lbs/ft
Pin Position Horizontal
Material EN AW-6082 T6
Connection CS1-CON

Available in different lengths:
Art.No. Description
31110 Eurotruss JT20 0,25m silver
31111 Eurotruss JT20 0,50m silver
31112 Eurotruss JT20 1,00m silver
31113 Eurotruss JT20 2,00m silver
31114 Eurotruss JT20 3,00m silver

Also available in black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1467&productgroup=32&productgroupmain=2

EUROTRUSS HD22 black

EUROTRUSS

EUROTRUSS HD22 black

Eurotruss HD22 black
height: 200 mm / 7.87 in
width: 50 mm / 1.97 in
Tube: 48.4 x 4.47 mm / 1.91 x 0.18 in
Braces: 20 x 2 mm / 0.79 x 0.08 in
Weight ~4.3 kg/m / ~2.9 lbs/ft
Bolt position: Horizontal
Material of crossbeam: EN AW-6082 T6
Connector type traverse: CS1 - CON
different lengths and corner connectors 1-4 way available:
Art.no. Description
29028 EUROTRUSS HD22 0,50m, black
29027 EUROTRUSS HD22 1,00m, black
29025 EUROTRUSS HD22 2,00m, black
29023 EUROTRUSS HD22 3,00m, black
29021 EUROTRUSS HD22 Corner 1-4 directions, black

EUROTRUSS HD22 black

Eurotruss HD22 black
height: 200 mm / 7.87 in
width: 50 mm / 1.97 in
Tube: 48.4 x 4.47 mm / 1.91 x 0.18 in
Braces: 20 x 2 mm / 0.79 x 0.08 in
Weight ~4.3 kg/m / ~2.9 lbs/ft
Bolt position: Horizontal
Material of crossbeam: EN AW-6082 T6
Connector type traverse: CS1 - CON
different lengths and corner connectors 1-4 way:
Art.no. Description
29028 EUROTRUSS HD22 0,50m, black
29027 EUROTRUSS HD22 1,00m, black
29025 EUROTRUSS HD22 2,00m, black
29023 EUROTRUSS HD22 3,00m, black
29021 EUROTRUSS HD22 Corner 1-4 directions, black

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=924&productgroup=32&productgroupmain=2

EUROTRUSS HD31 Boxcorner BLK 31 black

EUROTRUSS

The BLK-31 corner block enables the creation of 2,3,4,5 and 6-way corners with FD/HD31 single tube. Attachments such as BLK-SCON-ST (Steel 1/2 connector) or BOB (Bold-On Receiver) are bolted to the corner block. In this way, all configurations of 90 degree angles are possible. This makes it a perfect, easy-to-use, creative and cost efficient product.

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube black 1,00m

EUROTRUSS

EUROTRUSS HD31 single tube truss

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube Black 2,00m

EUROTRUSS

Eurotruss Eurotruss single tube truss black

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube black 3,00m

EUROTRUSS

EUROTRUSS HD31 single tube black

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube black 0,75m

EUROTRUSS

EUROTRUSS HD31 single tube truss

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

MOVECAT Motor D8+ 160kg 18m

MOVECAT

electric chain hoist, D8 plus, SWL 160kg 4m/min 18m chain

Technical data
Load capacity: 160kg
Lifting speed: 4m/min
Chain length: 18m
Load trains: 1
Independent brakes: 2
Connection:1m 16A CEE / 400V connection cable
Protection class: IP 54
Dimensions: 38 x 19,6 x 18,6cm
Weight: 21kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=469&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 1000kg 24m P

MOVECAT

PROstage+
Electric chain hoist, D8 Plus SWL 1000kg 4m/min

Technical data
Load capacity: 1000 kg
Lifting speed: at 50 Hz approx. 4 m/min
Number of load trains: 1
Motor power: 1.1 kW
Noise level: < 60 dB/A / 1 m
Duty cycle/switches per hour: 40% / 240
Weight at 24 m stroke: 68.7 kg
Dimensions (LxWxH) mm 416 x 300 x 235
Lifting height: 24 m
Direct control 380 - 415 V AC
Maintenance-free DC brake (2)
Integrated operating hours counter
Overload protection through pat. safety slip clutch
High-strength D-Type special chain, black or silver
Specially hardened gear unit
Precisely milled and specially hardened chain pocket wheel with 5 pockets
Easyplate chain guide
Single hole suspension eye
Chain hook, rotatable
Permanently mounted, foldable textile chain storage (flame resistant, DIN 4102 B1)
High-strength light metal housing with two carrying handles
Black, low-reflection paint RAL 9005
Compact, lightweight construction
Very smooth, low-noise operation
Can be used in climbing and standard position without modification
1 m highly flexible Titanex HO7RN-F connection cable with CEE 16 A 4-pin plug (black) - DC version / Direct-Control

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1439&productgroup=23&productgroupmain=3

MOVECAT Motor D8 1000kg 36m

MOVECAT

MOVECAT ECOlite 1000

Technical data
Load capacity: 1000 Kg
Chain: 36m
stroke speed: 4m/min.
single strand chain silver coloured, chain hoist according to BGV D8, 400 V , 3 Ph, 50 Hz, direct control
incl. chain (K7022 high strength according to EN 818-7 DAT)
Use in overhead and standard mounting position without modification
patented slip clutch as overload protection
DC brake with current switch
2 handles
1 chain load hook
1 single hole suspension eyelet
Textile chain storage KS 724 for 36m chain
Basicplate chain inlet
connecting cable 1m with CEE 16/4 plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=735&productgroup=23&productgroupmain=3

MOVECAT Motor D8 1000kg 24m

MOVECAT

Eco Lite 1000/4
Electric chain hoist, BGV D8
SWL 1000kg
Speed 4m/min

features
Direct control 400 V AC or remote control 24 V DC
Direct current brake (1)
Overload protection through pat. slip clutch
High quality, specially hardened gears
Precisely milled and specially hardened chain pocket wheel with at least 5 pocketsHigh strength round steel chain according to DIN 5684
Basicplate chain guide
Single hole eye alternatively motor hook
Chain hook, rotatable
Fixed mounted, foldable textile chain storage
Robust cast light metal housing (ECOlite with plastic caps) closed on all sides with two handles;
Black, low-reflection paint RAL 9005
Compact, lightweight construction
Smooth, low-noise operation
Can be used in climbing and standard position without modification
1 m HO7RN-F connection cable with CEE 16 A 4-pin plug (black)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=119&productgroup=23&productgroupmain=3 Translated with www.DeepL.com/Translator (free version)

CHAINMASTER Motor D8+ 250kg 18m

CHAINMASTER

Features
Load capacity 250kg
Climbing or stationary train
Overload protection through patented slipping clutch
small design with a small weight
Exact chain guide
textile chain storage
Speed: 4m/min

Technical data
Colour: Black
Load capacity: 250kg
Strands: 1 strand
Speed: 4m/min
Chain: 18m / 5.2x15mm
Dimensions: 453x236x118mm
Motor power in kW: 0.37
Connection cable: 1m CEE 16 Ampere, 4pol
Safety brake: 2x
Weight with chain: 36kg
Weight without chain: 27kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=117&productgroup=23&productgroupmain=3 Translated with www.DeepL.com/Translator (free version)

CHAINMASTER Motor D8+ 500kg 24m

CHAINMASTER

Chainmaster electric chain hoist, D8 plus
SWL 500kg
Speed: 4m/min

Technical data
Load capacity: 500kg
Lifting speed: 4m/min
Chain length: 24m
Load trains: 1
Motor power: 0,75kw
Load chain: 7 x 22mm
Independent brakes: 2

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=313&productgroup=23&productgroupmain=3 Translated with www.DeepL.com/Translator (free version)

CHAINMASTER Motor D8+ 160kg 18m

CHAINMASTER

Chainmaster Rigging Lift BGV D8+, max. 160kg

Performance
Upgrade D8+ (2nd brake, 50% load relief)
2 handles
Rotating hook
18m chain 4x12mm
Chain box 4/20
1 strand 4m/min
Cable 1m
Plug CEE16/4

RIMA Fluter A 150 CDM 4200K black

RIMA LDR

RIMA A 150W CDM asymmetrical floodlight

The stylish fair spotlight puts your exhibits in the right light! The asymmetrical floodlight with a CDM 150W bulb (discharge lamp) is generally equipped with a barndoor and colour filter frame. The electronic ballast is attached to the side of the bracket to be protected from overheating.

features:
150W CDM discharge lamp
4200°K
Colour: black
with colour filter frame
with barndoor
Weight 3,6 kg without hook
Dimensions: depth 105mm x width 340mm x height (without bracket) 205mm

Optional: in 5200°K

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=87&productgroup=8&productgroupmain=1

CHAINMASTER Motor D8 250kg

CHAINMASTER

Features
Working load 250kg
Climbing or stationary block
Overload protection through patented slipping clutch
Light and small design
Exact chain guide
Textile chain buffer
Speed: 4m/min
in the professional double case

Technical data
Colour: Black
Load capacity: 250 kg
Strands: 1 strand
Speed: 4m/min
Chain: 24m / 4x12mm
Dimensions: 317x189x114mm
Motor power in kW: 0.18
Connection cable: 1m CEE 16 Ampere 4pol
Safety brake: 1x
Weight with chain: 22.2 kg
Weight without chain: 15kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=115&productgroup=23&productgroupmain=3

CHAINMASTER Motor D8 1000kg 24m

CHAINMASTER

Features
Climbing or stationary block
Overload protection through patented slipping clutch
Light and small design
Exact chain guide
Textile chain buffer
Speed: 4m/min
1000kg in a professional single case

Technical data
Colour: Black
Load capacity: 1000 kg
Strands: 1 strand
Speed: 4m/min
Chain: 24m / 7x22mm
Dimensions: 371x257x155mm
Motor power in kW: 0.75
Connection cable: 1m CEE 16 Ampere, 4pol
Safety brake: 1x
Weight with chain: 51kg
Weight without chain: 27kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=116&productgroup=23&productgroupmain=3

MIG HIT 400W sym. Fluter 5200K

MIG

Features:
400W bulb E-40
symmetrical Reflector made of pure aluminium
HIT housing die-cast aluminium with cooling fins
black
IP 65
Weight: 11,0 kg
Dimensions WDH: 44 x 15,5 x 47,5cm

optional bulbs in the colours:
White 4200K
Blue
Green
Orange
Magenta

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=94&productgroup=8&productgroupmain=1

MIG HIT 400W asym. Fluter 5200K

MIG

Features:
400W bulb E-40
asymmetrical reflector made of pure aluminium
HIT housing die-cast aluminium with cooling fins
black
IP 65
Weight: 11,0 kg
Dimensions WDH: 44 x 15,5 x 47,5cm

optional bulbs in the colours:
White 4200K
Blue
Green
Orange
Magenta

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=94&productgroup=8&productgroupmain=1

LITECRAFT Studio Par MSR 575M black

LITECRAFT

The Studio PAR MSR 575M from LITECRAFT combines the classic design of the Studio PAR spotlight with the advantages of the particularly powerful and efficient MSR 575 lamp. The compact and extremely robust spotlight housing is made of die-cast aluminium. The ballast and the igniter are located externally in a housing that is screwed to the spotlight. Maximum light output is guaranteed by either the MSR 575 or the MSD 575 lamp with its particularly long service life, in conjunction with a highly refined reflector. The MSR illuminant reaches up to 1,000 and the MSD illuminant even up to 3,000 operating hours. The Studio PAR MSR 575M can be adapted to the respective lighting situation with extensive accessories such as colour filter frames and door panels.

Features
MSR 575-2/MSD 575
4 different lenses VNSP (6° x 6°), NSP (7° x 7°) MFL (9° x 19°), WFL (17° x 40°)
Bulb CSR 575/2, 7.200°K
socket GX 9,5
Optics PAR (Parabolic Aluminized Reflector)
Barndoor

Technical data
Mains voltage 230 V 50 Hz
Current consumption 2.6 A at 230 V
Ballast magnetic, internal
Housing
Material aluminium die-casting
Colour black

Dimensions/Weight
Dimensions (L x W x H) 25.0 x 25.0 x 50.0 cm
Weight 12,3 kg
Colour filter frame 19,5 x 19,5 cm
Barndoor 19,5 x 19,5 cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=91&productgroup=8&productgroupmain=1

Source 4 Par GKV 600w black

Eurolite

Spotlight with 4 interchangeable lenses (VNSP, NSP, MFL and WFL)
Light output of a conventional PAR 64 spotlight with lower power consumption
High-quality die-cast housing for highest stability
with colour filter frame
with metal reflector
with barndoor
bright GKV 240V/600W bulb
Ideal for theatres, large stages and mobile use

In flight case incl. barndoor, colour frame, Manfrotto uni clamps

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=77&productgroup=7&productgroupmain=1

SHOWTEC Sunstrip Active DMX Strip Blinder MKII

SHOWTEC

Showtec Sunstrip Active DMX MKII, is the successor of the very popular Showtec Sunstrip Active.

The Sunstrip is powerful and has a built-in dimmer pack. So that the device is particularly flexible for many applications,
you can select different DMX modes: 1 channel, 2 channels, 5 channels and 10 channels.

For stand-alone use, the Sunstrip-Active is equipped with 16 built-in patterns. as well as with a manual dimmer.

With the Neutrik Powercon inputs and outputs, the Sunstrip is ideal on-the-road even for demanding users.

For easy installation, the Sunstrip-Active is equipped with two wall/floor mountings as well as several M10 nuts to move the clamp into any desired position.

Specifications:
Built-in programs
Powercon In- and Output
DMX 3pol in/out
Including assembly/floor mounting
Lamps included

Current voltage: 240V 50Hz,
Power consumption: 550W
Control mode: DMX (selectable: 1, 2, 5 or 10 channels)
Current: 3.5A, fuse: F6.3A,
Lamp: 10x Showtec 240V/50W, GU10 (254026)
Weight: 5,32 kg
Dimensions: 1000 x 130 x 77mm,

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=82&productgroup=7&productgroupmain=1

VARYTEC LED PAR Typhoon 12 IP65

VARYTEC

Outdoor LED Flat Par
with large colour spectrum
ideal for temporary architecture or outdoor decorative lighting
black aluminium housing
UV effects and deep blue due to ultraviolet LEDs
four different dimmer curves
Color display with four buttons on the back side
Fanless through convection cooling incl. power adapter cable to Power Twist True1 IP65

Technical data
Light source: 12 pieces 10 W RGBWA UV LEDs in the colours red, green, blue, neutral white, amber and ultraviolet;
Modulation: 32 khz
Beam angle: 15°
Operating modes: DMX (3, 6, 8, 10 or 13 channels)
Sound-to-Light, Automatic, Master-Slave
Static colors selectable on the device
Power in/out: Power Twist True1 IP65 (suitable connection cable not included)
XLR in/out IP65 5 pin (female)
Housing protection class: IP65
Power supply: voltage 110 ~ 250 V / 50 ~ 60 Hz
Power consumption: max. 120 W
Dimensions (L x W x H): 288 x 280 x 142 mm
Weight: 4,00 kg

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=440&productgroup=6&productgroupmain=1

SGM TLD 612A IP65

SGM

For the operation of LED-Balls LB 100 and Tubes LT 100 or LT 200 a TLD-612A Touring Pixel Driver is required, which can drive up to 2m long LT100 or LT200 Tubes (54 pixels) or max. 6.8m long LED-Ball chains LB100 (56 pixels) with 6 outputs each.

The TLD-612A has a maximum output power of 360W and uses 3 channels for each pixel for RGB display.

Each TLD-612A has 2 moveable mounting brackets, 2 x RJ45 Art-Net sockets, a loop-through power supply and is IP65 rated. The ArtNet interface is designed for high speed / high flow DMX and can be perfectly used for pixel mapping.

Connections (TLD-612A)
Signal input: Artistic License Art-Net 3
Art-Net data input: RJ45 sockets
Driver Data output: locking 4-pin RJ765 connector

Electrical supply
Power supply: 100-240 V (50 / 60 Hz)
Power consumption: 360 W (max)
Connections: 16A CEE1p (blue) in / out
Protection class: IP65

Dimensions & weight
715 x 80 x 182mm (LxWxH)
Weight: 4Kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=274&productgroup=6&productgroupmain=1

SGM SP6 SixPack

SGM

The SGM SixPack is a further development of the classic Blinder concept. RGBA LEDs are used instead of halogen light sources. The lamp combines six bright 35W LED units with individual control options.
Thus, area lighting, animated text or programmed patterns can be realized with the same device. With the SixPack you not only have access to colour - the LEDs also simulate the decay behaviour of the old halogen bulbs. The trapezoidal housing can be cascaded both horizontally and vertically. So you can create any pixel array with the simple rigging system.

Special properties
6 x 35W RGBA power LEDs
Dimensions: 755x175x107mm
Weight: 8kg
DMX modes: 5, 7, 18, 24, 28, and 48 DMX channels
Power consumption: 250W (7W all LED off)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=50&productgroup=6&productgroupmain=1

SGM Q7W LED Fluter

SGM

The Q-7W is a compact, extremely powerful LED washlight with 1,000 powerful Cool White LEDs. The beam angle is 110° x 110° and the lamp head can be tilted manually up to 110°. The LED lifetime averages over 50.000 hours, the housing is IP65 protected (dustproof and jet water from all sides), the fan module IP55 (protected against dust and jet water from all sides).

The Q-7W has a light output of 60,000 lumens with a maximum power consumption of only 485 W. It is the ideal choice for illuminating buildings and facades, bridges or other objects homogeneously in outdoor areas. But the Q-7W also finds a wide range of indoor applications in TV studios, theatres and wherever a very wide beam angle and homogeneous illumination of crisp white floodlight is required.
. Another important application is as a blinder or strobe light, on stages indoors and outdoors.

Special properties
professional high performance LED floodlight with low power consumption
very low weight of only 8.1 kg
intelligent fan control with optimized low-noise technology
user-friendly, intuitive user interface
Easy communication with the device by integration of the new RFID technology, for automatic stock control and system diagnosis, or for transmission of DMX data for stand-alone applications even when switched off;
DMX or RDM protocol
comfortable stand-alone mode without the use of external controllers
wireless control via Wireless DMX Receiver
various mounting and positioning options
perfect, aesthetic design - combined with the latest LED technology

Features
Light source 1000 Cool White LEDs
Light output 60.000 Lumen
Beam angle 110 degrees
LED service life 50,000 hours
Power consumption 485 Watt/200-240V/50-60Hz
Dimensions: LxWxH 497 x 268 x 122 mm
Weight 8,1 kg
Material Aluminium
Protection class device IP65
Protection class fan module IP55

Optionally available
SGM door panel for P, Q & X series, 4 leaves
SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=49&productgroup=6&productgroupmain=1

SGM Q7 LED Fluter

SGM

The Q-7 is a very compact RGBW floodlight with a combination of 1,000 powerful multichip RGB and another 1,000 cool white LEDs.
A light output of 19,000 lumens (white on), or 28,000 lumens (all LEDs on), a very high luminance and a beam angle of 110 degrees make the Q-7 extremely versatile. The Q-7 can be used universally as a colored/white floodlight, blinder or stroboscope. Due to the IP65 protection class it can be used outdoors without any problems, as well as in the theatre or TV studio due to the almost noiseless fans.
The head of the Q-7 can be tilted by up to 110° and is IP65 protected (dustproof and jet water from all sides), the fan module IP55 (protected against dust and jet water from all sides).

Special properties
Professional high-power LED floodlight with low power consumption (465W)
Very low weight of only 8.1kg
Intelligent fan control with optimized low-noise technology
User-friendly, intuitive user interface
Easy communication with the device through the integration of the new RFID technology, for automatic stock control and system diagnosis, or for the transmission of data for stand-alone applications;
DMX or RDM protocol, comfortable stand-alone mode without the use of external controllers
Wireless control via Wireless DMX Receiver
Various mounting and positioning options perfect
Aesthetic design - combined with the latest LED technology

Features
Light source 1000 RGB Color LEDs + 1000 Cool White LED
Beam angle 110 degrees
LED service life 50,000 hours
Power consumption 465 Watt/200-240V/50-60Hz
Dimensions: LxWxH 497 x 268 x 122 mm
Weight 8,1 kg
Material Aluminium
Protection class device IP65
Protection class fan module IP55

Optional add-on
SGM door panel for P, Q & X series, 4 leaves SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=48&productgroup=6&productgroupmain=1

SGM Q2 LED Fluter

SGM

Based on the successful technology of the Q-7, the Q-2 is a smaller, lighter version and completes the range of compact RGBW floodlights. The Q-2 contains a combination of 432 powerful multichip RGB and 432 Cool-White LEDs ́s. These 864 LED's in total are individually controllable in 3 segments via DMX.

The Q-2 can be used universally as a colored/white floodlight, blinder or stroboscope. Due to its IP65 protection class, it can be used outdoors without any problems, as well as in the theater or TV studio due to its virtually noiseless fans. The head of the Q-7 can be tilted by up to 110° and is fully outdoor-capable.

The Q-2 incorporates all the attributes and characteristics of its big brother, the Q-7, and it can also be used perfectly in combination with it. However, the RFID and W-DMX interface available on the Q-7 has been omitted. Wireless DMX can however be easily implemented using a plug-in receiver for the XLR input.

Optics
Light sources: 864 x RGBW SMD LEDs (5,700K)
LED lifetime 50,000 hours
Lenses: 110°

Photometrics
Light output 12,000 lumen
Efficiency 60 lm/W

Features
Pan/Tilt 0° / 180°
LED Panel 3 individually controllable segments

Electrical data
Alternating current (AC) Power nominal 100 - 277V 50/60Hz
Maximum current consumption 90 - 305V 50/60Hz 275 W (all LEDs on) Typical current consumption 275 W (all LEDs on)
Factor 0.98 PF (230 V)

Programming & Protocol Protocol
USITT DMX512 A

Setting & Addressing
DMX channels 3, 6, 9, 12, 15 or 22
RDM
Stand alone mode
Oled graphic display
4 operating buttons
Software UpDate via uploader cable (P/N:83062011)

Mass & weight
Size (L x H x W) 334 x 223 x 105 mm (13.2 x 8.8 x 4.1 in)
weight 6,0kg
IP class IP65

Temperature
Temperature range Operation -10° to +40°C (-14° to +104°F)
Humidity (max.) 98%
Cooling active, controlled, low noise

Connections
DMX in/out XLR 5pin cable 0,5m
Current Neutrik HD IP65 1m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=257&productgroup=6&productgroupmain=1

SGM Q2W LED Fluter

SGM

The Q-2W is the smaller, lighter version of the Q-7W and completes the range of compact, white floodlights / strobes. With 432 powerful Cool White LEDs, the Q-2 produces a light output of an incredible 26,000 lumens with a maximum power consumption of only 275 W.
The LED surface is individually controllable in 12 individual segments via DMX.

The Q-2W can be used as a pure white floodlight, blinder or stroboscope, and thanks to its IP65 protection class it can be used outdoors without any problems. The head of the Q-7 can be tilted by up to 110° and is fully outdoor-compatible.

The Q-2W incorporates all the attributes and characteristics of its big brother, the Q-7W, and it can also be used perfectly in combination with it.
However, the RFID and W-DMX interface available on the Q-7W was omitted.
However, Wireless DMX can easily be realized by using a plug-on receiver for the XLR input.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=410&productgroup=6&productgroupmain=1

SGM Q10 LED Fluter

SGM

The SGM Q10 , the "big brother" of the well-proven SGM Q7 with more than 4000 SMD LEDs and nearly 60.000 Lumen is like a real lighting miracle.

Special properties
59878 Lumen 110º IP65 RGBW LED Floodlight, Blinder, Strobe
Flicker Free
2,048 RGB SMD LEDs and 2,048 white SMD LEDs with 8 independently controllable zones
CTC stepless 2000K - 10000K
4-leaf and 8-leaf door panels (OPTIONAL)
powerful, fast strobe
maintenance-free
user-friendly display
Wireless Control

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=788&productgroup=6&productgroupmain=1

SGM P6 LED Fluter, 10°, IP66

SGM

The SGM P6 is the succeeding model of the LED floodlight SGM P5 which is still "state of the art".

The P6 differs mainly by more powerful LED chips and the possibility of an uncomplicated change of the beam angle by means of different scattering filters.

Technical data
RGBW LED outdoor floodlight, 10°
IP66 Protection class
24 x 24W RGBW Multicolor LED, 20.500 Lumen
6 individually controllable segments
W-DMX (lumen radio), RDM
variable beam angle due to magnetic interchangeable optics
100 - 277V 50/60Hz, 475 Watt typical (675 Watt max.)

Accessories optional
SGM door panel for P6, 4 leaves
Filter for SGM P6 LED floodlight, medium 19°
Filter for SGM P6 LED floodlight, Wide 45°
Filter for SGM P6 LED floodlight, elliptical horizontal 63°x12°
Filter for SGM P6 LED floodlight, elliptical vertical 12°x 63°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=922&productgroup=6&productgroupmain=1

SGM P5 TW LED Fluter

SGM

The P-5 TW (Tunable White) washlights are perfect for applications where maximum luminous intensity is required and where the colour temperature must be variable or can be adjusted to suit the application. The washlights are not only based on the design of the original P-5 floodlight, but also have the same mechanics and SMPS switching power supply technology as the successful RGBW washlight.

Optical system
44 x High power 10W White LEDs (2,200 - 5,300K) LED lifetime: 50,000 hours
43° lens
Photometric data: Max. luminous efficiency: 30,400 lumen (43° lens); Efficiency: 74 lm/W
Various mounting and positioning options
Perfect, aesthetic design - combined with the latest LED technology

More features
Pan/Tilt: 0° / 110°
Maximum power consumption: 440 W
208 - 250 V Nominal 50/60 Hz
Normal power consumption 410 W
DMX protocol: USITT DMX512 A
Wireless DMX, RDM, stand alone mode
Graphic display / 5 buttons
DMX channels: 2, 4, 6 or 8
Dimensions (L x H x W): 497 x 268 x 122 mm
Weight: 8.9 kg
Material: Aluminium
Protection class: IP65 (with fan IP55)

Optional bookable
SGM door panel for P, Q & X series, 4 leaves
SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=44&productgroup=6&productgroupmain=1

LITECRAFT Studio Par MSR 575M silver

LITECRAFT

The Studio PAR MSR 575M from LITECRAFT combines the classic design of the Studio PAR spotlight with the advantages of the particularly powerful and efficient MSR 575 lamp. The compact and extremely robust headlamp housing is made of die-cast aluminium. The ballast unit and the igniter are located externally in a housing screwed to the headlamp. Maximum luminous efficacy is guaranteed by either the MSR 575 lamp or the MSD 575 lamp with its particularly long service life, in conjunction with a highly refined reflector. The MSR illuminant achieves up to 1,000 and the MSD illuminant even up to 3,000 operating hours. The Studio PAR MSR 575M can be adapted to the respective lighting situation with a wide range of accessories such as colour filter frames and barn door panels.

Features
MSR 575-2/MSD 575
4 different lenses
VNSP (6° x 6°), NSP (7° x 7°) MFL (9° x 19°), WFL (17° x 40°)
Bulb MSR 575/2, 7.200°K
Socket GX 9,5
Optics PAR (Parabolic Aluminized Reflector)
Barndoor panel

Technical data
Mains voltage 230 V 50 Hz
Current consumption 2.6 A at 230 V
Ballast magnetic, internal

housing
Material aluminium die-cast
Colour silver

Dimensions/Weight
Dimensions (L x W x H) 25.0 x 25.0 x 50.0 cm
Weight 12,3 kg
Colour filter frame 19,5 x 19,5 cm
Barndoor panel 19.5 x 19.5 cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=91&productgroup=8&productgroupmain=1

SLV Nepro Display wall light 120W R7s

SLV

Features

Halogen light in its most natural form
Rotatable up to 350°, tiltable up to 90°
Filigree design due to the slim lamp neck
Easy mounting due to the screw terminal
Ideal for lighting pictures, displays or goods

dimensions and weight
Height: 6 cm
Weight: 1,1kg
Width: 11 cm
Length: 52 cm

Light source:
Socket: R7s
Power: 120 watts
Lamp type: Halogen lamp

colours:
Lamp head: silver grey
Body: chrome colours

Details of the material:
Body: Aluminium
Lamp head: Aluminium

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=86&productgroup=7&productgroupmain=1

SGM P5 LED Fluter

SGM

The -state of the art- architecture light - still up to date ! Compact, quiet but powerful!

The P-5 RGBW LED washlight is the best-selling professional washlight and is perfect for applications where maximum light intensity is required - live, TV, theatre, exhibition stands, fashion shows or architectural applications.

In addition to a wide range of saturated colors, the P5 offers the full range of pastel tones and brilliant white light in a variety of color temperatures with unique brightness thanks to its RGBW LED combination.

Special features
44 x high power RGBW 10Watt LEDs
CTC and white balance
flicker-free operation for camera use
PAN / Tilt 0º 110º
OLED graphic display
Simple menu structure
W-DMX from Wireless Solution
DMX modes: 3 / 4 / 6 / 8 channel
DMX 5 pin in and out
Standard lens with 43º
Max. power consumption 450W
IP55 (device IP 65)
Weight 7,7kg net
Dimensions 368x500x120mm

Optional bookable
SGM door panel for P, Q & X series, 4 leaves
SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=419&productgroup=6&productgroupmain=1

ROBE pickle PATT, silver

ROBE

ROBE is sticking to the success of the PATT 2013 and with the picklePATT is supplying an equally attractive floodlight in retro design but with more compact dimensions. Like its big brother, the picklePATT offers eye-catching lighting for every stage and offers a particularly warm light colour thanks to its gold-coloured reflector.
picklePATT is based on a 392 mm parabolic aluminium reflector which accommodates an HPL 575 lamp. Contrary to the trend, the integration into the show light is not done via DMX but with the help of conventional dimmer packs.

Optical system
Bulb halogen 575 W, approx. 3,200°K
Base G 9.5
Optics PAR (Parabolic Aluminized Reflector) Beam angle 29° (@ 1/2 beam), 94° (@ 1/10 beam)

Technical data
Mains voltage 230/240 V 50/60 Hz
Power consumption approx. 2.5 A at 230 V
Ballast no
Dimensions (L x W x H) 53.1 x 52 x 24.2 cm
Weight 5,3 kg

PACKAGING UNITS 2 pcs or 4 pcs
Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=312&productgroup=7&productgroupmain=1

ROBE PATT 2013, silver

ROBE

In 2013, lighting designer Tim Routledge developed the PATT 2013 together with the company JTE - a floodlight that not only convinced with its warm halogen light but also with its striking retro design. Now this floodlight is being built in series in cooperation with ROBE to meet the demand for this product. The device is based on a parabolic aluminium reflector - PAR - with a remarkable diameter of 550 millimetres and an HPL bulb with 750 watts. Contrary to the trend, the integration into the show lighting is not done via DMX but via conventional dimmer packs.

Features
Halogen 750 W
17° (75° beam angle)
silver Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=300&productgroup=7&productgroupmain=1

SGM P2 LED Fluter

SGM

Based on the revolutionary technology of the P-5, the P-2 presents itself as a smaller, lighter version and rounds off the range of washlights. The P-2 contains 18 pieces of high power LEDs with 10W each, which can be individually controlled in 3 segments via DMX.

The beam angle can be changed by three different lens attachments: 15, 21 and 43 degrees (narrow, medium or wide), where 43 degrees is the standard angle. The P-2 is fully outdoor-compatible due to its IP65 protection class and weighs only 6.1 kg, the maximum power consumption is 275W.

The P-2 has all the attributes and characteristics of its big brother, the P-5, and it can also be used perfectly in combination with it. However, the RFID and W-DMX interface available on the P-5 has been omitted. Wireless DMX can however be easily implemented using a plug-in receiver for the XLR input.

Technical data
Operating voltage: 100 - 277V 50/60Hz
Power consumption: 275 W (all LEDs on)
Dimensions: 334 x 223 x 105 mm
Weight: 6,1kg
DMX channels: 3, 6, 9, 12, 15 or 22

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=51&productgroup=6&productgroupmain=1

ETC Source 4 Zoom 25° - 50°

ETC

Features
25-50 Angles
with cold light reflector optics
Power cable length 1.0m
750 W HPL bulb

optional on request:
IRIS-iris diaphragm Insert
Gobo-holder Insert

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=75&productgroup=7&productgroupmain=1

ETC Source 4 Zoom 15° - 30°

ETC

Features
15-30 angles
with cold light reflector optics
Power cable length 1.0m
750 W HPL bulb

optional on request:
IRIS-iris diaphragm Insert
Gobo-holder Insert

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=75&productgroup=7&productgroupmain=1

ETC Source 4 Par 575W black

ETC

Spotlight with 4 interchangeable lenses (VNSP, NSP, MFL and WFL)
Light output of a conventional PAR 64 spotlight with lower power consumption
High-quality die-cast housing for highest stability
with colour filter frame
with glass reflector
with barndoor

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=78&productgroup=7&productgroupmain=1

SGM P10 LED Fluter

SGM

The P-10 combines the functions of a washlight, strobe, floodlight and pixelblinder in one device. The LED continuous power, loss-free even over hours, is 1,150 watts. The P-10 contains 48 High Power RGBW LEDs with 24W each, resulting in a light output of brute 39,690 lumens with very good dimming characteristics, even in the lower power range.

Special properties
Professional high-power LED washlight
39,690 lumen Light output
48 x 24W RGBW LEDs
Intelligent temperature control with optimized low-noise technology and intelligent fan control;
User-friendly, intuitive user interface
DMX, Wireless DMX or RDM protocol
comfortable stand-alone mode without the use of external controllers;
Various mounting and positioning options
Color compatible with P & Q series products through SGM Color Calibration

Accessories optional
SGM door panel Filter Medium 19° Filter Wide 45° Filter elliptical vertical 12°x 63°
Filter elliptical horizontal 63°x12°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=423&productgroup=6&productgroupmain=1

DESISTI Magis 650W Fresnel

DESISTI

The extremely compact Fresnel spotlight with 650W

Features
Lens type: Fresnel
Lens diameter: 120 mm
Lamp socket: GY-9,5
Lamp type: 650W(CP-89)
Attachment: Mini TV spigot
Hook: Manfrotto Clamp
barndoor Dimensions / mm: 133
Filter frame size / mm: 129
Colour: black
Version: M.O. (manual operation)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=343&productgroup=7&productgroupmain=1

DESISTI Leonardo 5kW Fresnel P.O.

DESISTI

The Leonardo is the universal, compact spotlight with a 300mm Fresnel lens.
With the G38 base the Leonardo can be equipped with CP29.
The excellent optics allow a homogeneous light field, which can be limited very well with the Barndoors.
With the IP22 housing the Leonardo is already protected against vertically falling water drops.
Of course the extensive accessories of Desisti are available.

This Leonardo is pole-operated (P.O.)

Weight: 17 Kg
Power: 5000 Watt
Scope of delivery:
Cable 5m with switch
4 leaves barn door
filter frame
Protective grille

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=438&productgroup=7&productgroupmain=1

SGM P1 LED Fluter, 10° IP65

SGM

The P-1 is a versatile RGBW wash with full wireless operation, designed to meet the needs of corporate productions, broadcast applications, wedding receptions, staging and events.
To further enhance the P-1's versatility, unique magnetic holographic filters allow the P-1 to change its beam angle depending on the application, while the built-in lithium-ion battery allows longer operating times without recharging and eliminates the need for cables or AC power.
The P-1 is an intelligent, reliable and powerful light, housed in a compact, light and elegant assembly: an LED washlight that sets a new standard for the most demanding users.

Special features of the P-1 RGBW Wash Light
Battery operated
RGBW Wash Light with eight High Power LEDs
Based on the design of the P-2
As automatic emergency lighting
Mains or battery operation, 10-12 hours operating time
Completely wireless - Wireless DMX inside
Colour compatible with P & Q series products through SGM Color Calibration
Weatherproof, IP65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=444&productgroup=6&productgroupmain=1

SGM LT 100 LED 3D 1m

SGM

The LT-100 Tubes consist of 1.0m long tubes with a total of 27 pixels, with a pixel pitch of 35mm.

The 3D effect is created by mounting several Graphic-Tubes rows one behind the other or side by side and a control via 3D software (e.g. Madrix LED Lighting Control). A 3D effect is calculated from 2-dimensional objects using special pixel mapping and then each pixel of the LED-Tubes is addressed individually.

The result is three-dimensional waves or bars that can be changed at will in speed, color, brightness and direction.

Required for operation of LT100

TLD-612 A

Technical data
27x 2 RGB LEDs
LED lifetime 50.000 hours
Pixel Pitch 35mm
Light Output 510 Lumen
Beam angle 2x 130°
Addressable pixels: 27

Electrical data
12V ±0.2V direct current / DC
Power 20W (all LEDs on)
Control via SGM TLD 612, TLD 612A or ILD 162

Weight, mass and casing
Dimensions: 1006mm x 27mm
weight: 330g Housing: IP 65; acrylic & aluminium

Optional
extension cable 0,85m
extension cable 1,50m
extension cable 2,00m
extension cable 3,00m
extension cable 5,00m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=260&productgroup=6&productgroupmain=1

SGM LT 200 LED 3D Graphic Tube 2m

SGM

The LT-200 Tubes consist of 1.95m long tubes with a total of 54 pixels at a pixel pitch of 35mm. Each pixel is individually controllable by DMX, by media server or by pixel mapping.

The 3D effect is created by mounting several Graphic-Tubes rows one behind the other or side by side and a control via 3D software (e.g. Madrix LED Lighting Control). A 3D effect is calculated from 2-dimensional objects using special pixel mapping and then each pixel of the LED-Tubes is addressed individually.

The result is three-dimensional waves or bars that can be changed at will in speed, color, brightness and direction.

Required for operation of LT200
TLD-612 A

Technical data
54x 2 RGB LEDs
LED lifetime 50.000 hours
Pixel Pitch 35mm
Light Output 1.020 Lumen
Beam angle 2x 130°
Addressable pixels 54

Electrical data
12V ±0.2V direct current / DC
Power 40W (all LEDs on)
Control via SGM TLD 612, TLD 612A or ILD 162

Weight, mass and casing
Dimensions: 1951mm x 27mm
Weight: 560g
Casing: IP 65; acrylic & aluminium

Optional
extension cable 0,85m
extension cable 1,50m
extension cable 2,00m
extension cable 3,00m
extension cable 5,00m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=261&productgroup=6&productgroupmain=1

SGM LB 100

SGM

The cascadable LED-Ball segments LB-100 form a graphic or video curtain with 120mm pixel pitch. The individual balls are semitransparent and have a viewing angle of 360°. Besides 2D applications, complex 3D pixel mappings are also possible when using 3D software (e.g. Madrix LED Lighting Control).

Each segment has a length of 0.85m, contains 7 LED balls and one multipin connector each at the top and bottom. Each individual LED ball has a diameter of 34mm and has 2 powerful RGB LEDs embedded in a semi-transparent white plastic ball.

When using 8 individual LB-100 chains, this results in a maximum length of 6.8 meters, with a pixel number of 56 and a total power consumption of only 59 watts. The LB-100 are addressed either directly via DMX or via ArtNet™.

The LED balls are suitable for TV applications, theme parks, exhibition stands, clubs and discotheques, shopping malls and many other applications. Required for operation of LB100: TLD-612 A or ILD LED Driver.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=280&productgroup=6&productgroupmain=1

ROBERT JULIAT Dalis 862,

ROBERT JULIAT

Designed as an asymmetrical LED foot ramp, the Robert Juliat Dalis 862 has two separately controllable reflector rows to illuminate the near and far field separately. In this way, a wide range of creative applications are possible. In addition, the Dalis 862 offers an extremely homogeneous illumination, with the colour temperature being continuously adjustable from warm white (2,200K) to cool white (6,500K).

Thanks to its fanless cooling, the Dalis 862 can also be used in very noise-sensitive areas. Due to its extremely flat design, it can be placed inconspicuously on stages and its angle of inclination can be adjusted by +/- 5° using the adjustable feet. The integrated Ethernet DMX node allows the use of the Dalis as a converter of RDM, Art-Net and sACN into DMX signals. As a special feature, the Dalis 862 offers four red and blue separately controllable position lights, which for example help performers on stage to find their way around.

As a special feature, the Dalis 862 offers four red and blue, separately controllable position lights, which, for example, help performers on stage to find their way around.

Special properties
Near and far field illumination thanks to two independent LED rows
Integrated LED position lights
Variable colour temperature from 2.200K to 6.500K
LED rows can be controlled in four individual groups
Very flat and unobtrusive design
8/16-bit LED control
Fanless
Flicker-free

Technical data
Beam angle/zoom 90° vertical
Colour temperature 2.200K - 6.500K
Operating voltage/ supply voltage 95-265V AC, 50Hz/60Hz
Power 150W
Power factor (cos φ)0.96
IP classification IP20
Connectors on input side powerCON TRUE1, etherCON, XLR5
Connectors on the output side powerCON TRUE1, XLR5
Dimensions 1005 x 155 x 115mm
Weight 8kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=848&productgroup=6&productgroupmain=1

ROBE PATT 2017, LED

ROBE

The LED-powered PATT 2017 extends Robe's range of retro-style headlamps. It is environmentally friendly and a very special playmate for aesthetic colours and tungsten white light for concerts, TV and film. It scores in lighting situations where the external design of the lamp is important.

Light source
Light source type: 7x 40W RGBW Multichips
Life expectancy of the LEDs: min. 20,000 hours
Typical brightness after 20. 000 hours: 70%

Optical system
550mm parabolic aluminium reflector with highly reflective coating;
The hemispherical diffuser dome ensures even light distribution from the RGBW LED source in the reflector

dynamic effectsbr> Color mixing modes: RGBW or CMY
Individual control of each RGBW pixel
Variable color temperature (CTO): 2700K - 8000K
Virtual colour wheel: with 66 pre-programmed colours
Preprogrammed pixel effects with colors, dimming and strobe, with waves and pulse adjustable in speed and direction;
Shutter: electronic with variable strobe speed (max. 20 flashes per second)
Preprogrammed, randomly generated stroboscope & pulse effects
High-resolution electronic dimming: 0 - 100%

Control & Programming
PATT driver: external
Setting and addressing: 2 row LCD display & 4 control buttons;
Protocols: USITT DMX-512, RDM, ArtNet, Kling-Net, sACN
Wireless CRMX™ technology from Lumen Radio (optional)
DMX protocol Modes: 6
Number of control channels: 13, 32, 40, 47, 53, 60
Color mixing modes RGBW or CMY: Resolution 8 or 16 bit (internal 18 bit) Dimmer: Resolution 8 or 16 bit (internal 18 bit)
Thermal specifications
Maximum ambient temperature: 45°C (113°F)
Maximum case temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)

Electrical specifications and connectors
PATT driver
Power supply: Electronic with automatic range selection
Supply voltage: 100-277 V, 50/60 Hz
Power consumption: 210 W
Power connector: Neutrik powerCON TRUE1 in/out
DMX and RDM data: lockable 3-pin & 5-pin XLR in/out
Integrated network switch 10/100 Mbps: 1x in/1x out
Network interface: RJ45 in/out
Power and data: lockable 4-pin XLR out (from PATT driver to PATT 2017)

PATT2017
Power and data: lockable 4-pin XLR in

Mechanical specifications
PATT driver
Height: 358 mm (14.1")
Width: 82 mm (3.2")
Depth: 162 mm (6.4")
Weight: 3.0 kg (6.6 lbs)

PATT2017
Height: 680 mm (26.8")
Width: 695 mm (27.4")
Depth: 356 mm (14.0")
Weight: 7.2 kg (15.9 lbs)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=849&productgroup=6&productgroupmain=1

moLUX xpo575 LED 6300K

moLUX

The moLUX xpo575 is a new contemporary LED variant in the 575 MSR daylight class. With high output and a high CRI, the xpo575 is a perfect exhibition lamp.

Special properties
31x 10 Watt CREE LED with CRI 90 and 6.300 K
Power: Powercon True1 in/out
Signal: XLR 5pol in/out

Accessories
Lens Kit 25°
Sash door, filter frame, diffuser
Power cable Schuko - True1 Powercon 1,5m

Optional
LED Lens Kit 15°/ LED Lens Kit 35°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=439&productgroup=6&productgroupmain=1

DESISTI Leonardo 1kW Fresnel P.O.

DESISTI

The Leonardo 1kw is a compact Fresnel spotlight

Features
Lens type: Fresnel
Lens diameter: 150 mm
Lamp socket: G-22
Lamp type: 1000W (CP-71)
Mounting: 28mm spigot
Hook: Avenger Stage Clamp C337
Sash door Dimensions / mm: 192
Filter frame size / mm: 187
Colour: black Version: P.O. (Pole-operated)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=342&productgroup=7&productgroupmain=1

DESISTI Leonardo 2kW Fresnel P.O.

DSISTI

The Leonardo 2kw is a compact Fresnel spotlight

Features
Lens type: Fresnel
Lens diameter: 250 mm
Lamp socket: G-38
Lamp type: 2000W (CP-73)
Mounting: 28mm spigot
Hook: Avenger Stage Clamp C337
Barndoor Dimensions / mm: 344
Filter frame size / mm: 314
Colour: black Version: P.O. ( pole operated)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=342&productgroup=7&productgroupmain=1

MARTIN Rush PAR2 Zoom

MARTIN

The Martin RUSH PAR 2 RGBW Zoom spotlight is a real alternative to conventional PAR lamps. With 12x 10W LEDs it has an impressive light output. From the basic colours RGB and W the user has more than 33 pre-defined colour presets at his disposal. The electronic dimming allows a brightness adjustment of the Martin RUSH PAR 2 from 0% to 100% and additionally different strobe functions. DMX controllable with 5 or 9 channels.

Technical details
LED PAR 12 x 10 W RGBW Osram Ostar LEDs
LED power: 120W
Zoom range: 10° - 60°
33 colour presets plus white
Electronic dimmer: 0%-100%
Strobe effect
Shutter effect: Instant open and blackout
DMX 512 (5 or 9 channels)
5-pin XLR
Control panel with LC display
Neutrik PowerCon power connection
Voltage: 100 - 240 V, 50/60 Hz
Weight 5,5kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=352&productgroup=6&productgroupmain=1

LITECRAFT WashX.21 LED Fluter, IP 65

LITECRAFT

The WashX.21 from LITECRAFT supplements the X-Series with a powerful outdoor floodlight. Compared to many other LED-based floodlights on the market, which with their very narrow beam angles are actually just larger LED spots, the WashX.21 can rightly be called an LED wash. The 21 RGBW LEDs in combination with high-quality optics provide a homogeneous wash effect. Saturated colours as well as pastel shades are mixed very well and convince by their brilliance.

Special properties
RGBW under a lens
Beam angle 40°
Protection class IP 65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=399&productgroup=6&productgroupmain=1

TPIX.7

LITECRAFT

The LITECRAFT TPiX.7 is a matrix beam effect. The "T" in the name stands for tungsten, which takes into account the warm colour temperature of 2,700° Kelvin. The assembly of the panel consists of a total of 49 warm white CREE LEDs, which, equipped with 7° optics, generate a "wall" of beams. Different dimming curves emulate a dimming behaviour as one is used to from halogen light.

TPiX.7 not only offers a matrix effect but can also be used as an audience blinder. The 49 pixels can be freely controlled via DMX, ArtNet or Kling-Net or be played with one of the integrated pixel macros.

Thanks to its robust housing, with compact dimensions of 50 x 50 centimeters and the electronics integrated in the panel, the TPiX.7 can be quickly assembled and disassembled and is recommended for touring use. Further external control components are not necessary for this product.

The TPIX is the alternative to Chromlech Jarag and Chromlech Elidy!

All important settings on the device can be made on the TPiX.7 via a large display.

Features
49x 3 W CREE Warm white 2,700° K LEDs
USITT DMX 512 & ArtNet
ArtNet input & output (RJ 45)
Optical system: fixed optical system
Beam angle 7°

LED light sources
LEDs 49x 3 W CREE Warm white 2,700° K
Colours 49x warm white 2.700° K
Lifetime LEDs > 50.000 hours
Colour mixture warm white 2.700° K

Temperature ranges
Ambient temperature 0°/+40° C
Operating temperature +69° C
Cooling Convention cooled

Effects
Shutter/Strobe (electronic)
Dimmer0-100% linear, 8-bit

Control & Programming
Protocol USITT DMX 512, ArtNet
DMX 512 channels 5/49/54 (3 modes)
Internal memory: 9 pre-programmed sequences with variable speed Test and demo programs, master/slave control;
Menu Display LCD 16 digits, 2 lines
DMX 512 connector XLR 3 pin XLR 5 pin
ArtNet connection 2x RJ 45 EtherCon female

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.8 A at 230 V

housings
Material: die-cast aluminium
Colour: black
Housing protection class IP20

Dimensions/weight
Dimensions (L x W x H) 50.0 x 50.0 x 8.3 cm (without bracket)
Weight7,5 kg
Mounting points Mounting bracket with hole
Locking system for mounting with further panels

Special features
Selectable dimmer curves DHCP or static IP address selectable;
Temperature display
ArtNet input & output (RJ 45)
PowerCon Input & Output
Operating hours counter
Automatic voltage adjustment 100-240 V

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=251&productgroup=6&productgroupmain=1

Public Light 8-Light Blinder

Ultralite

8-Light Blinder
PAR 36 / 650W
Housing: Alu
Colour: Black

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=81&productgroup=7&productgroupmain=1

Public Light 2 Light

DTS

Blinder 2 light PAR 36 / 650W / 230V Housing: Alu Colour: Black

LITECRAFT SunX.10

LITECRAFT

As an alternative, but not only as an alternative to the well-known SunStrip, LITECRAFT offers the SunX.10. The SunX.10 solves the disadvantages of a SunStrip due to conventional illuminants by means of high-quality and long-life LEDs. So the regular exchange of illuminants is now a thing of the past and the power consumption is also reduced many times over.

SunX.10 has 10 warm white LEDs with a colour temperature of 2,800/3,000 K which can be dimmed thanks to high-quality electronics. Furthermore, three curves, selectable via menu or DMX, emulate the dimming of a conventional halogen lamp. The radiation angle is specified at 25 degrees at delivery. For special applications, the reflectors can be quickly and easily replaced and the beam angle adjusted to 10 degrees. Thanks to the clear OLED display, all settings can be made very easily and without a user manual.

Optical system
Optics: fixed optical systems
Beam angle 25°

LED light sources
LEDs: 10x 10 W warm white 2.800° K
Colours: 10x warm white 2.800° K
Lifetime LEDs > 50.000 hours
Colour mixture: Warm white 2.800° K

Temperature ranges
Ambient temperature 0°/+40° C
Operating temperature +69° C
Cooling: convection cooled

Effects
Shutter/Strobe (electronic)
Dimmer 0-100% linear, 8-Bit

Control & Programming
Protocol: DMX 512 DMX 512 channels 5/10/15 (3 modes)
Internal memory: 9 pre-programmed sequences with variable speed test and demo programs, master/slave control;
Menu Display: OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.5 A at 230 V
Material: extruded aluminium profile
Housing protection class IP20
Dimensions (L x W x H) 99.2 x 6.9 x 19.6 cm (with bracket)
Weight 4,7 kg
Mounting points: Mounting bracket with hole

Special features
Selectable dimmer curves
PowerCon input & output
Operating hours counter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=286&productgroup=6&productgroupmain=1

ARRI True Blue ST2 P.O. Black

ARRI

The classic in the incandescent light range with barndoor in the colour black.

Features
Lens type: Fresnel
Lens diameter: 250 mm
Lamp socket: G-38
Lamp type: 2000W (CP-40/73)
Mounting: 28mm spigot
Hook: Avenger Stage Clamp C337
Barndoor Dimensions / mm: 344
Filter frame size / mm: 330
Colour: black
Version: P.O. (pole-operated)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=66&productgroup=7&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

LITECRAFT PowerBarX.15

LITECRAFT

With the PowerBarX.15 LITECRAFT offers the further development of the PowerBar AT10.sx. The model has 15 multichip LEDs with RGBW assembly and is significantly more powerful than its predecessor thanks to the optimized 15° optics. A 20° diffuser is already included in the scope of delivery for more extensive illumination. This means that absolutely perfect colour mixing starts right at the exit of the lens, colour shadows on the object to be illuminated are eliminated. The optimized diffusion filter can be exchanged for other versions at any time with just one movement of the hand.

A single pixel control allows dynamic effects as well as the integration into pixel mapping controllers. The device is controlled via DMX 512 and has programs and colors for stand-alone operation. All settings are easy to make thanks to the OLED display and clear menu system. An extra feature is the battery buffering of the OLED display, allowing settings and addressing to be carried out without power, as well as the optional locking of the display against unauthorized use.

PowerBarX.15 has a particularly robust design and is therefore not only convincing in daily touring use, but is also suitable for longer outdoor use due to its high protection class IP 65. The cabling is flexible and simple with IP-protected connectors in the powerCON True1 and XLR 5 pol.

Optical system
Optics: flexible optical systems
Beam angle: 15°. 20° diffusion filter

LED light sources
LEDs: 15x Multichip LEDs
Colours: 15x red, 15x green, 15x blue, 15x white
Lifetime LEDs > 50.000 hours
Color mixing: RGBW

Temperature ranges
Ambient temperature -20° / +35°C
Operating temperature max. 78°C
Cooling Convection cooling

Control & Programming
Protocol DMX 512
DMX 512 channels 4/6/10/60/65 (5 modes)
Internal memory, stand-alone programs fixed colors, master/slave control
Menu display: OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 47-63 Hz
Current consumption 0.7 A at 230 V

Casing
Material: Aluminium
Colour: black
Housing protection class: IP 65

Dimensions/weight
Dimensions (L x W x H) 99.2 x 16 x 19 cm
Weight 8,3 kg
Mounting: compact Y-bracket for hanging and standing mounting Omega Braket

Special features
RGBW under a lens
Single pixel control
Removable holder for optional diffusion filters
Color macros preprogrammed
Color programs preprogrammed
Stand Alone RGBW Programming
Memory for last operating status
Easy to use menu with OLED display
Selectable dimmer curves
Flicker-free
Operating hours counter
Default Set Function
powerCON True1 input/output
Waterproof XLR 5 pin connectors

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=355&productgroup=6&productgroupmain=1

ARRI 650 Plus Fresnel Silver/blue

ARRI

The classic in the incandescent light range with barndoor in the colour silver/blue.

Features
Lens type: Fresnel
Lens diameter: 112 mm
Lamp socket: GY 9.5
Lamp type: 650W
Attachment: Mini TV spigot
Hook: Manfrotto Uni clamp
Colour: silver/blue

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=70&productgroup=7&productgroupmain=1

LITECRAFT Powerbar 5

LITECRAFT

With the PowerBar 5 LITECRAFT complements its established LED bar with another model with additional amber LEDs. The RGBAW equipment greatly expands the colour spectrum, especially in the area of warm colours, giving lighting designers added value for all areas of stage technology.
. The light output of the PowerBar 5 has also been significantly increased. More efficient control ensures an increase in brightness with the same colours and full compatibility with PowerBar 4 of more than 30 percent.
A combination of PowerBar 4 and PowerBar 5 models is also easily possible. The PowerBar 5 can be adjusted via a specially developed PowerBar 4 mode. Thanks to the extended range of functions LITECRAFT offers with the PowerBar 5 an independent product within the PowerBar series. As with all new LITECRAFT LED products, this device also has the new LC display.

Special features
Color macros preprogrammed
Continuously dimmable
4 DMX zones (running light)
XLR 3/5 pin In/Out
NEUTRIK PowerCon In/Out
Mounting bracket also for vertical mounting
Master/Slave mode

Optical system
Optics: fixed optical systems
Beam angle: 10° x 40°

LED light sources
LEDs: 80x 2 W LEDs
Colours: 16x red, 16x green, 16x blue, 16x cold white (6.000° K), 16x amber;
Lifetime of LEDs: > 50.000 hours
Color mixing: RGBAW

Temperature ranges
Ambient temperature: 0°/+35° C
Operating temperature: max. 45° C
Cooling: Fan

Control & Programming
Protocol: USITT DMX 512
DMX 512 channels: 1/2/3/4/5/9/20 (7 modes)
Internal memory: audio/stand alone programs, fixed colors, master/slave control;
Menu display: LED 4-digit
DMX 512 connector: XLR 3 / 5 pin

Technical data
Mains voltage: 100-240 V, 47-63 Hz
Power consumption: 0.8 A at 230 V

Casing
Material: Aluminium
Colour: black
Housing protection class: IP 20

Dimensions/weight
Dimensions (L x W x H): 110.0 x 15.8 x 18.3 cm
Weight: 6,5 kg
Mounting bracket/base foot with hole

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=58&productgroup=6&productgroupmain=1

LITECRAFT OutLED WT20.swa, IP65 schwarz

LITECRAFT

The OutLED WT20.swa can also be used as a supplement to the previous model, as the LED assembly and all features of the predecessor have been adopted or further developed. The colour temperature can be adjusted continuously in the range between 2,300 and 5,700 Kelvin.   The radiation pattern has changed compared to its predecessor. Whereas the InLED WT20.swa, equipped with a 15 degree optic, had a very narrow beam, the OutLED WT20.swa now features a 25 degree wide and absolutely homogeneous wash.

For control purposes, the device offers identical DMX modes as well as macros and programs. A further plus is the full RDM (Remote Device Management) functionality, which allows settings such as DMX mode and DMX address to be made externally via the DMX line.

With regard to headlamp connectivity, the OutLED WT20.swa has waterproof connectors in powerCON True1 and XLR 5-pin versions instead of fixed connection cables. This means that the spotlight can be used in an absolutely flexible manner and is convincing in terms of handling.

Another advantage is the well-known Y-bracket from LITECRAFT. Here, Omega sealing sleeves are already pre-assembled, which can be extended with the optional Omega Bracket.

Features
SWA under a lens
Stand Alone SWA Programming
Memory for last operating status
Easy to use menu with LC display
Operating hours counter
Default Set Function
powerCON True1 Input & Output
18x 10 W SWA LED
Beam angle 25°
Protection class IP 65

Accessories
powerCON True1 connection cable
Mounting bracket with hole
4-leaf door panel

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=708&productgroup=6&productgroupmain=1

LITECRAFT OutLED AT10.plus

LITECRAFT

Based on the successful OutLED AT10, LITECRAFT introduces the OutLED AT10.plus, the successor product that can also be used as a supplement to the previous model. The reason for this is that all features of the previous series have been taken over and further developed.

Thus the OutLED AT10.plus convinces with a higher light output at comparable values for colors and radiation behavior, but like its predecessor remains absolutely homogeneous in the color mixture.

For control purposes, the device offers identical DMX modes as well as macros and programs. A further plus is the full RDM (Remote Device Management) functionality, which allows settings such as DMX mode and DMX address to be made externally via the DMX line.

Regarding the connectivity of the headlamp, the OutLED AT10.plus has been completely revised. Instead of the fixed connection cables, waterproof connectors are now available in powerCON True1 and XLR 5 pin versions. This makes the spotlight even more flexible in use and convinces in handling.

The advantage of the well-known Y-bracket is the pre-assembled Omega sealing sleeves, which can be extended with an optional Omega bracket.

Details

Optical system
Optics
fixed optical systems
Beam angle 25°

LED light sources
LEDs 18x Multichip
LEDs colors 18x red, 18x green, 18x blue, 18x amber
Lifetime LEDs > 50.000 hours
Color mixing RGBA

tTemperature ranges
Ambient temperature -20° / +35°C
Operating temperaturemax. 58° C
Cooling Fan, temperature controlled

Control & Programming
Protocol DMX 512-A (RDM)
DMX 512 channels 1/2/3/4/8 (5 modes)
Internal memory: audio/stand alone programs fixed colors, master/slave control;
Menu display LCD 8-digit, 2 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V, 47-63 Hz
Current consumption0 ,5 A at 230 V

Casing
Colour black
Housing protection class IP 65

Dimensions/weight
Dimensions (L x W x H) 28.5 x 22.1 x 31 cm
Weight 6 kg Mounting of compact Y-brackets for hanging and standing installation

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=359&productgroup=6&productgroupmain=1

ARRI 300 Plus Fresnel Black

ARRI

The classic in the incandescent light range with barndoor in the colour black.

Features
Lens type: Fresnel
Lens diameter: 80 mm
Lamp socket: GY 9.5 (CP81)
Lamp type: 300W
Attachment: Mini TV spigot
Hook: Manfrotto Uni clamp
Colour: black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=70&productgroup=7&productgroupmain=1

ARRI 650 Plus Fresnel Black

ARRI

The classic in the incandescent light range with barndoor in the colour black.

Features
Lens type: Fresnel
Lens diameter: 112 mm
Lamp socket: GY 9.5
Lamp type: 650W
Attachment: Mini TV spigot
Hook: Manfrotto Uni clamp
Colour: black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=70&productgroup=7&productgroupmain=1

LITECRAFT MarsX.1

LITECRAFT

With the MarsX.1, LITECRAFT offers a hybrid product that can be used both for everyday use as a conventional lighting tool and as a special effect.

MarsX.1 is equipped with a 203 millimetre high quality stepped lens, which is characterised by an absolutely homogeneous radiation pattern. This means that the device can be used classically as a stepped lens for the basic light. The performance is comparable to that of a 1.2 kW halogen spotlight. This is made possible by a 250 Watt LED engine with RedShift function, which gives the warm white light with a colour temperature of 2,700 Kelvin a halogen-typical progression into amber during dimming. The device thus behaves like a conventional spotlight with a halogen light source. The RedShift function as well as the duration of the "afterglow" can be adjusted from the console.

An extra feature of the MarsX.1 is the use as a blind person. Thanks to the RedShift function, the device behaves exactly like a conventional blinder when flashing. The large optics support the effect. In addition, the spotlight is equipped with protection class IP 65 and can therefore also be used outdoors.

For this purpose, the MarsX.1 can also be used as a decorative light thanks to its attractive housing. When dimmed, its large lens provides beautiful eye-catching effects when used with cameras.

The robust design of the MarsX.1 makes it fully tourable. Cabling is done with IP-protected connectors in powerCON True 1 and XLR 5 pin versions. All settings can be made via an OLED display in combination with a clear menu structure. The OLED display is also battery-backed, which means that settings and addresses can be made even when no power supply is available. The display can be locked to prevent unauthorized use.

The optionally available accessory holder holds the colour filter frame and the door trim at the same time.

Optical system
Optics: fixed optical systems
Beam angle 60°

LED light sources
LEDs: 1x 250 W RedShift LED Engine
Colors: 1x warm white 2.700 K (RedShift)
LED service life > 50,000 hours
Colour mixture warm white 2.700 K + amber (RedShift)

Temperature ranges
Ambient temperature 0°/+40° C
Cooling Fan, temperature controlled

Effects
Shutter/Strobe (electronic)
Dimmer0-100% linear, 8-Bit

Control and programming
Protocol DMX 512
DMX 512 channels 3/4/5/6 (4 modes)
Internal memory: stand-alone programs, manual control, master/slave control;
Menu Display: OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 1.2 A at 230 V

Casing
Material: die-cast aluminium
Colour: black
Housing protection class IP 65

Dimensions/weight
Dimensions (L x W x H )38 x 37.1 x 18.8 cm (with bracket)
Weight 8,8 kg
Mounting points compact Y-bracket for hanging and standing mounting;

Special features
RedShift LED Engine
Halogen-typical red drift thanks to additional amber LEDs
Temperature display
Programs preprogrammed
Stand Alone Programming
Memory for last operating status
Selectable dimmer curves
Selectable PWM frequency
Flicker-free
Operating hours counter
Default Set Function
powerCON True1 Input & Output
Waterproof XLR 5 pin connectors

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1425&productgroup=6&productgroupmain=1

LITECRAFT BlindX.4

LITECRAFT

LED-blinder

Special features
4 warm white LEDs
3,000 K
87°
DMX
Aluminium, black
4 LED zone control

With the BlindX.4, LITECRAFT distances itself from all previous LED Blinder versions and presents a new, perhaps daring, but unique design with a high recognition value which can also shine as an eye candy in the camera. And also the inner values are convincing. The four 38 Watt COB LEDs deliver an output that is comparable to conventional 650 W DWE lamps. As far as the colour of the light is concerned, BlindX.4 remains old school - the device does not have a colour mixing system but convinces with a colour temperature of 2,800/3,000 Kelvin, which is equal to that of a halogen bulb.

The control is, as you can expect from a device today, DMX 512 compliant. The entire electronics are already integrated and can be configured quickly, easily and without the need for an instruction manual thanks to the OLED display. This includes menu items such as setting the typical halogen dimmer curve as well as the pulse width modulation frequency for adaptation to modern cameras in TV.

Features
4x 38 W warm white 3.000° K
USITT DMX 512
4 mechanically separately adjustable light sources

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=284&productgroup=6&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

ROBE Robin Tarrantula

ROBE

Designed for concerts, car shows, sporting tournaments, indeed any event in a large venue, the Tarrantula is powered by 36x 40W and 1x 60W high powered emitters providing a stunning 20.000 lumen output. The versatile optical system offers an adjustable beam angle, from a tight 4° spot to a super-wide 50° wash, of the highest quality light. The LEDWash 800 inspired Beam Shaper accessory creates a traditional oval beam that can be indexed to precisely cover the desired stage or performance area. Central to the effects capabilities of this fixture is Robe patented MCFE™ - Multi-Coloured Flower Effects, adding yet another spectacular visual dimension. Driven by the 60W RGBW multichip, this creates the sharpest spikes of light, rotating in either direction with controlled speed. Fully saturated and intense colours as well as subtle pastel tones are created with velvety smooth transitions thanks to the integrated internal 18bit LED dimming system. Dynamic video effects are easily achieved by mapping individual pixels controlled by a DMX desk or media servers via sACN with internal HTP merging, DMX or by Kling-Net protocol.

SOURCE
Light source type: 1x 60W RGBW and 36x 40W RGBW LED multichips (CW and TW also available)
Typical lumen maintenance: 70% @ 20.000 hours
LED life expectancy: min. 50.000 hours

OPTICAL SYSTEM
Robe’s proprietary optical design
High - efficiency zoom optical system, ratio 12,5:1
Zoom range: 4° - 50°
Fixture total lumen output: 20.150 lm
Light output: 80.200 lx @ 5 m

DYNAMIC EFFECTS
Colour mixing mode RGBW or CMY
Individual control of each RGBW pixel
Variable CTO: 2.700K - 8.000K
Virtual Colour Wheel: with 66 preset swatches
Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)
Colour rainbow effect with variable speed
Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patent pending)
Strobe effect: variable speed (max. 20 flashes per second)
Pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 - 100%

CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
Wireless CRMX™ technology from Lumen Radio: On request
DMX Protocol modes: 6
Control channels: 27, 47, 145, 182, 158, 195
Pan/Tilt resolution: 16 bit
R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)
Zoom: 8 bit
Dimmer: 8 or 16 bit (internal 18 bit)

MOVEMENT
Pan movement: 540°
Tilt movement: 220°
Movement control: Standard and Speed
Controllable speed of Pan/Tilt movement
EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patent pending)
Automatic Pan/Tilt position correction

THERMAL SPECIFICATION
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 75°C (167°F)
Minimum operating temperature: -5°C (23°F)

ELECTRICAL SPECIFICATION AND CONNECTIONS
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: 1000 W
Power in connector: Neutric powerCON TRUE1
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in/out: RJ45
Embeded Ethernet switch 10/100 Mbps: 1x in / 1x out

APPROVALS
CE Compliant
cETLus Compliant (pending)

MECHANICAL SPECIFICATION
Height: 587 mm (23.1”)
Width: 508 mm (20”)
Depth: 257 mm (10.1”)
Weight: 21.2 kg (46.7 lbs)
Ingress protection rating: IP20

RIGGING
Mounting positions: Horizontally or vertically
Universal operating position
Mounting points: 2 pairs of ¼-turn locking points
2x Omega adaptors with ¼-turn quick locks
Safety cable attachment point
Tilt transport lock

https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1396&productgroup=5&productgroupmain=1

GLP Impression X4

GLP

The impression X4 is equipped with 19 RGBW LEDs (15 watts each) and a 7°-50° zoom lens. The housing is based on the legendary impression 90 and therefore has all the advantages of the Live Design Award winner. The built-in optics allows a clearly defined hard beam to be displayed in the lower zoom range and is absolutely homogeneous and soft in the middle and upper zoom range. All this without disturbing stray light.

Clean RGBW colour mixing, variable CTO and a finely tuned dimming curve are standard in the impression X4.

The macro effects give the designer additional scope for attractive lighting designs. Light generation:
Additives Colour mixing
19 Osram RGBW high-power LEDs
Service life: 20,000 h

Optics
Motorized zoom: 7° - 50°
Lens hood

Movement
high-resolution 3-phase stepper motor control
8 or 16 bit resolution selectable
maximum speed: 660° pan in 2sec, 260° tilt in 1sec,
Position Feedback

Control system
DMX-512 protocol
illuminated graphic LCD
4 illuminated keys
very quiet, temperature controlled fan cooling
Convection cooling possible if required
Overheating protection
Colour balance calibrateable
Internal color presets
Internal LED Macros

Connections
DMX: XLR 5pin
Mains voltage: Powercon

Operating parameters
Input voltage: 100V-240V, 50-60Hz,350VA
Maximum ambient temperature: 45°C
Operating position: any

Mechanics
Weight 7,5 kg
Dimensions HxWxD 385x340x242mm

Flexible fastening concept
vertical standing: stand with eyelets for ratchet straps
hanging (vertical): thread M10 with non-rotating mounting position for halfcoupler
hanging (horizontal): adjustable rail for lateral truss mounting (optional)
2 eyelets for safety fastening

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=253&productgroup=5&productgroupmain=1

ELATION Artiste DaVinci LED Spot

ELATION

With the Artiste DaVinci, ELATION provides the perfect "workhorse" for almost every purpose and location, as well as the most varied event sizes. The heart of this LED moving light consists of a 270 watt LED engine with cool white colour temperature. It delivers a remarkable light output of more than 12,000 lumen, which ensures highly pleasing results even when using dark colours or gobo/animation combinations.

Optical system
- LEDs2 70 W white light engine, 8.000 K
- Optics Ellipsoidal
- Beam angle/zoom 6°-48° continuous, motorized, 8/16-bit
- Focus infinitely variable, motorized, 8/16-bit

Temperature ranges
- Ambient temperature -25°/+45° C
- Cooling Fan, temperature controlled

Colours
- Color mixing system CMY plus CTO, macros, 8/16-bit
- Color wheel 17 colors plus open
- Color correction infinitely variable
- Rainbow effect infinitely variable, forward/backward

Gobos
- Gobo wheel 1 6 gobos plus open (glass & metal) (29.9 mm) indexable, rotatable, shakeable 8/16-bit
- Gobo wheel 2 9 Gobos plus open (Metal)

Effects
- Iris stepless, motorized, motion macros, 8/16-Bit
- Frost motorized, 8-bit prism 3-fold & linear
- Prism, rotatable, macros, 8/16-bit
-Animation Wheel yes
- Shutter/Strobe 1-18 flashes/sec (electronic), macros
- Dimmer 0-100% linear, 8/16-bit dimmer curves (Standard, Stage, TV, Architectural, Theater)

Control & Programming

- Protocol DMX 512-A (RDM), ArtNet, sACN, E-Fly
- DMX 512 channels 26/28/40 (3 modes)
- Internal memory10 sequences of 64 steps each Test and demo programs, Master/Slave control
- Pan/Tilt Range Pan 540° (630°), Tilt 260°, 8/16-Bit
- Menu display LC display, backlit, battery buffered
- DMX 512 connector XLR 5 pin ArtNet connector 2x RJ 45 etherCON female

Technical data
- Mains voltage 100-240 V, 50/60 Hz
- Current consumption1.7 A at 230 V
- Dimensions/Weight Dimensions (L x W x H) 41.6 x 28.4 x 64.5 cm
- Weight 25,4 kg

Special features
- LED service life approx. 50,000 hours
- Selectable PWM frequency (900-25,000 Hz)
- Selectable gamma adjustment (2.0/2.2/2.4/2.8)
- Variable dimmer curves
- Various blackout modes
- Pan/Tilt Speed channel
- Iris, strobe, prism/gobo macros
- 16 bit channels for pan/tilt, dimmer, CMY+CTO, color wheel, gobo rotation, iris, prism zoom, focus
- Automatic position correction
- Remote DMX reset, partial
- Display Password
- DMX Analyzer
- DMX Channel User Modes (own DMX channel composition)
- DMX patching via DMX
- DMX-Recorder Master/Slave for up to three different devices
- Hibernation (sleep mode/energy saving)
- No DMX Backup (Close, Hold, Auto Program)
- Software update via DMX 512
- Operating hours counter
- Network input & output
- powerCON True1 Input & Output

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=427&productgroup=5&productgroupmain=1

CLAY PAKY Sharpy Wash

CLAY PAKY

With the Sharpy Wash 330, Clay Paky introduces to the market an extremely compact and fast washlight with the energy-saving 330W Platinum lamp from Philips, which is comparable in brightness to 1,000W moving lights. Thanks to its wide zoom range from 6.5° to 48° plus a patented motorized top hat and a beam shaper, the Sharpy Wash 330 also offers numerous design possibilities. In addition, its compact design and low weight of only 18.5kg allow for rapid pan/tilt movements. A colour wheel with eleven colours, a CMY colour mixing system and two frost filters round off the effect palette of the Clay Paky Sharpy Wash 330. - Lamp output 330W
- lamp service life 1.500h
- Beam colour temperature 8.000K
- Zoom 6.5° to 48° and motorized top hat
-CMY-colour mixing
-1 Color wheel with 11 fixed colors (incl. CTO and CTB filters)
- Indexable and rotatable Beam-Shaper
- 2 frost filters

- Operating voltage/ supply voltage 115-230V
- Mains frequency 50Hz, 60Hz
- Power 520VA - Power of the lamp 330W
- Colour temperature 8.000K
- Ballasts electronic
- Beam angle/zoom 6.5°-48°
- Average lamp service life 1,500 h
- Number of circuits / channels 19-22
- CMY color mixing system 1CTO 2 on the color wheel Frost filter2 (light / strong)
- Ovaliser rotatable and indexable Battery buffered display1
- Pan/Tilt 540°/240°
- Dimensions 345 x 405 x 563mm
- Weight 18.5kg IP classification IP20

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=390&productgroup=5&productgroupmain=1

ROBE Robin DL4X Spot, RGBW LED, 10°- 45°

ROBE

Improved, brighter version of the ROBE RGBW LED module enables the DL4X spotlight to use specially modified colour mixing and dimming for extra smooth, stepless operation, especially at minimum brightness and colour output brighter than 1200 watt discharge unit, but with an average very environmentally friendly power consumption of only 250 watts.

The DL4X features an innovative LED driver system for an improved, extremely high-resolution dimming curve for all R, G, B and W colours with 18-bit resolution to enhance the already perfectly smooth colours, fades and dimmers. The optical system produces a very smooth, high quality light output of rich, beautiful colours without shadows and uses a versatile zoom of 10 - 45 degrees. Effects features include a combination of static and rotating gobo wheels with individually interchangeable positions, variable frost, triple prism, super fast aperture, including full-range dimming and variable strobe effects.

Optical system
LEDs 480 W RGBW modules
Optics Ellipsoidal
Beam angle/zoom 10°-45° stepless, motorized
Focus infinitely variable, motor-driven

temperature ranges
Ambient temperature 0°/+45° C
Operating temperature max. 80° C
Cooling temperature controlled fans

Colours
Colour mixing system RGBW/CYM plus CTC, macros
Colour correction 2,700°K, 3,200°K, 4,200°K, 5,600°K, 8,000°K
Halogen dimmer curve (3.200°K, 2.700°K)
Rainbow effect infinitely variable, forward/backward

Gobos
Gobo wheel 1 7 gobos plus open (26.8 mm), slot & lock indexable, rotatable, shakeable 8/16-bit
Gobo wheel 2 9 gobos plus open (26.8 mm), slot & lock

Effects
Iris stepless, motorized, macros, max. 20 Hz, 8/16-bit
Frost stepless, motorized, 8-bit, macros
Prism 3-fold prism 11°, rotatable, 8-bit
Shutter/Strobe electronic, macros
Dimmer 0-100% linear, 8/16-Bit

Control & Programming
Protocol USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2, sACN
DMX 512 channels 22/24/34 (3 modes)
Internal memory 3 sequences of 99 steps each, music trigger test and demo programs, master/slave control
Pan/Tilt control tracking and vector
Pan/Tilt Range Pan 530°, Tilt 280°, 16-Bit
Menu display QVGA touch screen, blue backlit Battery buffered
DMX 512 connector XLR 3 pin XLR 5 pin
ArtNet connection RJ 45 EtherCon female

Technical databr> Mains voltage 100-240 V, 50-60 Hz
Power consumption 0.95 A at 230 V (average)
2.9 A at 230 V (maximum)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=740&productgroup=5&productgroupmain=1

ROBE Robin Spikie

ROBE

ROBE's Spikie is the first LED WashBeam with a point light source. The compact moving light is based on a 60 Watt RGBW LED chip and a 110 millimeter front lens for equally crisp beams and homogeneous washes. The zoom range is flexibly designed with infinitely variable 4 to 28 degrees. This makes the Spikie flexibly applicable for small to medium sized productions in all areas.
As an innovation leader, ROBE provides two additional features that clearly set the Spikie apart from other single beam LED effects on the market. The Flower effect creates hundreds of fine, colorful beams that can be rotated in both directions. The Beam Effect Engine splits the beam into three narrow beams that can also be rotated freely in both directions.

Pan/tilt can be rotated without a stop at Spikie and give further dynamic range. At only 5.5 kilograms, Spikie can be mounted in any position and integrated into the stage design.

Optical system
Optics fixed optical systems
Beam angle/zoom 4°-28° stepless, motorized

LED light sources
LEDs 1x 60 W RGBW COB chip
Colours 1x red, 1x blue, 1x green, 1x white
Lifetime LEDs > 20,000 hours
Color mixing RGBW + CTC
Virtual colour wheel with 66 LEE, 12 BMFL and 10 user colours

Temperature ranges
Ambient temperature +45°C
Operating temperature +80°C
Cooling Fan temperature controlled

Effects
Shutter/Strobe 1-20 flashes/sec (electronic), macros
Dimmer 0-100% linear, 8/16-Bit
virtual halogen dimmer curve
Prism 3-fold prism linear, rotatable, 8-bit
Flower effect

Control & Programming
Protocol USITT DMX 512 (RDM)
DMX 512 channels 21/27 (2 modes)
Internal memory 6 programmable sequences of 25 steps each
Test and demo programs, master/slave control
Pan-Tilt control tracking and vector
Pan-Tilt range
Pan 360° (without stop), Tilt 360° (without stop), 8/16-bit, macros,
Menu Display
LCD 2 lines, blue backlit
DMX 512 connector XLR 5 pin

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.9 A at 230 V

Dimensions/Weight
Dimensions (L x W x H) 40.7 x 27.3 x 22.5 cm
Weight 7,3 kg

Special features
110 mm front lens
CTC Macro Channel
Virtual colour wheel with 66 LEE, 12 BMFL and 10 user colours
Virtual halogen dimmer curve
Various blackout modes
Pan/Tilt Speed channel
Strobe, RGBW macros
16 bit channels for Pan/Tilt, Dimmer, RGBW, Zoom
Automatic position correction
Remote DMX reset, partial
DMX analyzer
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter
powerCON True1 Input & Output
Optional LumenRadio CRMX Wireless DMX

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=322&productgroup=5&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

ROBE Robin T1 Profile

ROBE

The new and the ONE headlamp you need for theatre, television and touring! Now also with the possibility to use with Robes innovative RoboSpot System.

The T1 has been specially designed to meet the high demands of these specialist areas and meets all of them in just one single headlamp. The revolutionary MSL™ (multi-spectral light source) LED module provides a light output of up to 10,075 lumens. This makes it impressively bright - and it does so with whisper-quiet operation.

The T1 Profile is equipped with all the features you would want in a theatre. Any colour and colour temperature is possible for even the most demanding lighting designer, thanks to the simple CMY colour control, a wide range of CCT control from 2700 to 8000 Kelvin and the DataSwatch™ filters, which offer a wide choice of pre-programmed colours. These are also recalibrated automatically or on command by the new Robe RCC™ (Robe Colour Calibration) algorithm, providing the exact colour tones you need, even years later. All theatrical requirements for dimming the spotlight are met brilliantly with our unique, infinitely variable 18-bit dimming system from Robe. The high CRI value of over 90 also ensures natural skin tones. The closed optical system keeps dust and dirt out, thus reducing maintenance to a minimum.

For television use, the T1 offers a special channel for plus/minus green tones, as well as Cpulse™ - a pulse width modulation control for flicker-free light, for example for HD and UHD cameras. These features are complemented by our precise iris slider system, two 0.5° and 10° variable frosts that can be used over the full zoom range, specially designed breakup and aerial gobos, iris, an animation wheel and a prism. All of this enables the perfect execution of your design, whether in the theatre, on television or touring.

You only need one headlight for all this - the T1.

light source
Light source type: 550 W MSL™ (Multi-spectral LED) Engine
Life expectancy of the LEDs: min. 30,000 hours
CRI 90+
Control: automatic or remote on/off
Guarantee on the light source: 3 years or 20,000 hours

OPTICAL SYSTEM
Robe's proprietary optical design
Highly efficient optical zoom system, ratio 7:1
Zoom range: 7° - 49°, covers the preferred range of most theatre and TV spotlights
Light output in lumens: up to 10,075 lm

DYNAMIC EFFECTS
White and color tones calibrated at any time to the factory settings using the new RCC™ (Robe Color Calibration) system, with automatic or on-demand, independent recalibration of the LED engine without the need for external tools
Color mixing: Additive with CMY control mode
Variable color temperature (CTO): 2700K - 8000K
DataSwatch™ Filter: 237 pre-programmed colours and tones including the common white tones with 2700K, 3200K, 4200K, 5600K and 8000K
Tungsten (incandescent) effect: emulation of 750W, 1000W, 1200W, 2000W and 2500W lamps (warm tone shift during dimming and sluggish response/fadeout)
+- Green correction function
Adjustable CRI channel from 80 to 90+
Orifice slider module: 4 individually positionable sliders plus rotating positioning of the entire module +/-60° (patented)
Rotating gobo wheel: 7 rotating, indexable and interchangeable breakup and aerial gobos + open; All gobos are specially selected for theatre and TV applications
Animation wheel: made of aluminium, for single use or in combination with gobos, rotatable in both directions with variable speed
Prism: 6-fold prism with 8°, rotatable in both directions with variable speed
Iris: motorized, infinitely variable, pulse effects up to 3 Hz
Frost: very light 0.5° frost for softening the gobo projection or the iris sliders and a medium 10° frost for a uniform wash, both variable and specially selected for theatre and TV applications
Motorized zoom and focus
Shutter: electronic with variable strobe speed (max. 20 flashes per second)
Preprogrammed, randomly generated strobe & pulse effects
L3™ (Low Light Linearity) - 18 bit dimming without noticeable steps for ultra-fine dimming up to blackout
Due to its particularly quiet operation it is especially suitable for all kinds of theatre and TV productions
Cpulse™: Pulse width modulation (PWM) control for flicker-free light, for example for HD and UHD cameras
Low service requirement due to the sealed effect engine of the head: no smoke or dust can penetrate and thus not contaminate the optical elements such as gobos or lenses

CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe Touchscreen with battery buffer, gravity sensor for automatic screen alignment, operating memory Service log with RTC, stand-alone operation with 3 editable programs (each with up to 100 steps), integrated error analysis for fast error detection
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN
Web server Wireless CRMX™ technology from Lumen Radio (optional)
DMX protocol modes: 3
Number of control channels: 49, 33, 53
Pan/Tilt: resolution 16 bit
Color mixing: resolution 8 or 16 bit (internal 18 bit)
Variable CTO: Resolution 8 Bit
Adjustable CRI channel: Resolution 8 Bit
Green correction +-: Resolution 8 Bit
Aperture slider module motion & rotation: resolution 8 bit
Positioning rotating gobo wheel: Resolution 8 bit
Gobo indexing & rotation: resolution 8 or 16 bit
Rotation animation wheel: resolution 8 bit
Indexing and rotation of the prisms: resolution 8 bit
Iris: resolution 8 or 16 bit
Frost: resolution 8 bit
Zoom: Resolution 8 or 16 bit
Focus: Resolution 8 or 16 bit
Dimmer: Resolution 8 or 16 bit (internal 18 bit)

MOVEMENT
Pan movement: 540°
Tilt movement: 280°
Motion control: standard and reduced speed
Automatic Pan/Tilt position correction
EMS™: Electronic Stabilizer System for Pan & Tilt to reduce light beam deviations caused by crosshead movement or vibration

GOBOS
7 rotating glass gobos
Screen diameter: 23.5 mm
Outer diameter: 26.8 mm
Thickness: 1.1 mm
Maximum thickness: 4 mm
High temperature glass like BOROFLOAT® or better
"SLOT&LOCK" system for easy exchange of gobos

EFFECT WHEEL
Single animation wheel
Material: Aluminium
Can be used individually or in combination with the rotating gobos
Rotating in both directions with variable speed

FRAMING SHUTTERS SYSTEM
Blades: 4 Blades, each individually movable in its position and rotation
Motion: stepless with variable speed
Stepless and very precise movement of the orifice slider module
Rotation: +/- 60° of the complete orifice plate module

THERMAL SPECIFICATIONS
Maximum ambient temperature: 45°C (113°F)
Maximum case temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)

ELECTRICAL SPECIFICATIONS AND CONNECTORS
Power supply: Electronic with automatic range selection
Supply voltage: 100-240V, 50/60 Hz
Power consumption: Max. 750W at 230 V / 50 Hz (all LEDs on)
Power connector: Neutrik powerCON TRUE1 in
DMX and RDM data: lockable 3-pin & 5-pin XLR in/out
Network interface: RJ45 in

RELEASE
CE conformity
cETLus match

MECHANICAL SPECIFICATIONS
Height: 726 mm (28.6") - head in vertical position
Width: 400 mm (15.7")
depth: 258 mm (10.2") - head in vertical position
Weight: 24.3 kg (53.6 lbs)
IP protection class: IP20

RIGGING
Mounting positions: Horizontal or vertical
Ready for operation in any position
Attachment points: 2 pairs of mounting points with 1/4 turn quick release fasteners
2x Omega adapters with 1/4 turn quick release fasteners included
Anchor point for safety cable
Pan&Tilt transport safety device

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1438&productgroup=5&productgroupmain=1