Motion GmbH | dry hire rental offers

MARTIN JEM Glaciator X-Stream

MARTIN

The Glaciator X-Stream is a fully integrated high-performance ground fog machine.

The Glaciator X-Stream generates large amounts of low-lying ground fog with the help of Jem fluid and a closed cooling system.
In our rental shops it comes standard with a Y-valve and two hoses to better distribute the ground fog.

Features
Fog volume 80 m2/ min
3,500 W heating element
15 min Heating time
5 l Fluid capacity
Different fluids for different effects
Internal or external fluid tank
Protection of the machine in case of fluid shortage
Fully integrated unit without CO2 tank or dry ice
Integrated DMX interface
Device menu
Fog guidance system (optional)

Dimensions and weight
Length: 866 mm
width: 638 mm
Height: 725 mm
Weight (dry): 110 kg

Power
filling capacity: 80 m2
Fog duration: Continuous, automatic. Quantity adjustment
Heating time: approx. 15 min

Connections
Cable remote control: 3-pin XLR
DMX data: 3-pin XLR
Mains connection: IEC-EN60309-2 Connection (CEE connection)

Electrical data
Mains voltage (EU models): 220 - 240 V nominal, 50 Hz
Main fuse (220-240 V mains voltage): 32 A Fuse menu, DMX

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=176&productgroup=30&productgroupmain=10

MARTIN JEM Airforce 2

MARTIN

JEM Air Force 2 / AF-2

The AF-2 is a wind machine with high airflow. It can be controlled by DMX. The AF-2 is ideal for theme parks, stages and theaters.

Features
6,500 m3 / h
Revolutions 200 - 1380 rpm
Standing on the floor or in the truss / on the ceiling
Touring Frame (optional)
Integrated DMX interface, 3- and 5-pin
Multifunction remote control

Dimensions and weight
Width: 682 mm
Height: 707 mm
Depth: 318 mm
Weight (dry): 17 kg

Power
Maximum air flow: 6,500 m³ / hour
Fan speed: 200 - 1380 rpm

Control and programming
Control protocol: cable remote control (included in delivery), DMX;
Functions of the remote control: Immediate or timer controlled fog, adjustable fog quantity (0-100%)
Timer range: delay 2-18 s (X1), 16-144 s (X8) / fog time 2-18 s (X1), 16-144 s (X8)
DMX channels: 1
Protocol: USITT DMX 512 (1990)

Construction
Housing steel and aluminium
Installation: Orientation Any

Connections
Cable remote control: 3-pin XLR
DMX data: 3- and 5-pin XLR connectors
Mains connection: 3-pin IEC connector

Electrical data
Mains voltage (EU models): 220 - 240 V nominal, 50 Hz
Main fuse (220-240 V mains voltage): 5 A slow-blow

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=183&productgroup=30&productgroupmain=10

MARTIN JEM Airforce 1

MARTIN

JEM Air Force 1 fan

The AF-1 is a powerful fan with DMX control. It can be used on the ceiling, in a truss or standing on the floor.

Features
1.600 m3 / h
0 - 2.500 min-1
Standing on the floor or in the truss / on the ceiling
Integrated DMX interface
Multifunction remote control

Dimensions and weight
width: 320 mm height: 350 mm depth: 180 mm
Weight (dry): 10 kg

Control and programming
Control protocol:
Cable remote control (included in delivery), DMX 512, 0-10 V analog
Remote control functions:
Immediate or timer controlled fog
adjustable fog volume (0-100%)
Timer range: delay 2-18 s (X1), 16-144 s (X8) / fog time 2-18 s (X1), 16-144 s (X8)
DMX channels: 1
Protocol: USITT DMX 512 (1990)

Construction
Housing: steel

Connections
Cable remote control: 3-pin XLR
0-10 V analog: 3-pin XLR
DMX data: 3-pin XLR
Mains connection: 3-pin IEC connector

Electrical data
Mains voltage (EU models): 220 - 240 V nominal, 50 Hz

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=182&productgroup=30&productgroupmain=10

LOOK SOLUTION Viper NT

LOOK SOLUTION

Properties
Functional principle: Evaporator fog machine
Heat output: 1300 W
Controllable via DMX-512
Integrated timer
Supply voltage: 230 V / 50 Hz
Heating time: approx. 7 min.
Fluid consumption at max. output: 120 ml/min
Fluid consumption motion with continuous mist: 35 ml/min
Capacity of the fluid container: 5 l
Fog output adjustable in 99 steps
Output range: max. 15 m
0 - 10 V analog
Stand-alone operation
Temperature control: microprocessor controlled
With overheating protection by heating block/thermostat, pump and temperature switch;
Dimensions (L x W x H): 47 x 23 x 24 cm
Weight without canister: approx. 8.3 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=406&productgroup=30&productgroupmain=10

LOOK SOLUTION Viper 2.6, Smoke Machine

LOOK SOLUTION

The VIPER 2.6 is the more powerful version of the Viper NT.

It combines the latest digital technology with proven engineering and performance.
Enormously strong fog output, easy operation and the possibility to connect an external fan are the main features of this machine.

properties
Powerful vaporizer mist machine
Supply voltage: 230 V/ 50 Hz
Heating time approx. 7 min.
Heat output: 2600 W
Fluid consumption at max. output 240 ml/min.
Fluid consumption with continuous mist 70 ml/min.
Capacity of the fluid container: 5 liters
Fog output adjustable in 99 steps
Output range: max. 15 m at < 50% output Continuous fog
Fan connection: max 800 Watt (air volume adjustable in 99 steps
) Fogging time at 100% output approx. 40 sec. at 40% continuous fog
Control analog 0-10V/ DMX 512/ Stand Alone
Electronic temperature control
Heating block with thermostat
Pump with temperature switch
Housing made of galvanized, powder-coated sheet steel

Optionally available
Flight option

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=730&productgroup=30&productgroupmain=10

LOOK Orka Smoke Machine with fan and FC

LOOK SOLUTION

ORKA Tourpack: Fog & Fan in a case

The Orka in a robust flight case offers additional advantages. The integrated, powerful fan increases the output range even more. The airflow can be deflected vertically through the air baffle.

The ORKA is currently the most powerful series-produced fog machine on the market. It can be used wherever enormous amounts of fog are needed in a very short time. Due to the enormous power and the wide fog output, very large halls and stadiums can be filled with fog. This makes the ORKA the perfect machine for large events, concerts, special effects, amusement parks, large studios, large discotheques, for fire brigade and disaster control exercises and much more.  
Due to the robust housing and the compact design the machine is well suited for mobile use.

DMX 512 as standard: The ORKA can be controlled via DMX as standard. The connection is made via 5pin XLR cable. The DMX start address is set and stored via the membrane keyboard. It remains stored even if the unit is disconnected from the mains.

Analogue (0 - 10 V), the unit can be operated either from a console or optionally via XLR remote. Here the connections are plugged in via 3-pin XLR cable. A stand-alone operation is also possible. The amount of fog is adjusted directly at the unit. By briefly pressing the start button, the unit will start fogging automatically. A permanent pressing of the start-button is not necessary. With the integrated timer, fogging time in seconds, pause time in minutes and output quantity in % can be programmed exactly. The membrane keypad with illuminated numeric display and easily recognisable symbols allows uncomplicated operation through simple menu navigation. It also offers protection against soiling of the operating elements. Finest adjustment of the output quantity: digital technology enables fine adjustment of the pump. The output quantity can be adjusted in 1% steps from 0 - 99%. From the smallest fog cloud to dense continuous fog, any desired effect can be created without any problems. This allows the use in smaller locations as well as in halls.

An external fan with max. 800 Watt can be connected to the ORKA. This can be controlled via DMX 512. The unit then occupies two consecutive channels on the console.

Production and service in Germany

Technical data
Functional principle: Evaporator fog machine
Heat output: 9000 watts / 8000 watts (208 V)
Supply voltage: 3 x 230 V with neutral conductor, 50 Hz
Heating time: approx. 15 min.
Fluid consumption: at max. output: 500 ml/min. at continuous mist: 70 ml/min.
Fog output: adjustable in 99 steps
Output range: approx. 30 m
Fog time:
at max. output approx. 2 min
at < 40% output: continuous fog
Fan connection: max. 800 Watt
integrated capacitor
Air volume: adjustable in 99 steps
Control: DMX 512
0 - 10 V analog Stand alone radio remote control (option)
Temperature control
Microprocessor controlled via dual sensor
Overheating protection heating block/thermostat pump/temperature switch;
Dimensions (L x W x H): 55 x 37 x 28 cm
Weight without canister: approx. 30 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=178&productgroup=30&productgroupmain=10

DJ POWER H-2VSD Smoke Machine

DJ POWER

The H-2VSD is the world's first vertical dual output LED fog machine.

It was developed especially for the professional stage. With its unique "Super-Jet" technology, the H-2VSD can even compete with CO2 jets in terms of output speed and power. The H-2VSD is twice as fast and offers twice the brightness compared to previous vertical fog machines.
DJ POWER's "Inner Flame Color Changing" technology also enables fascinating fog coloring by allowing the core of the fog output to be lit separately from the fog front! The user-friendly LCD display and operation make the H-2VSD to an ideal device for large clubs, large stage productions and rental companies.

Power supply
Voltage AC 220 V - 240 V / 50/60 Hz
Fuse 13.5 A/250 V
Power consumption Max. 3100 W

Light source
LM TypLED Xin1
Color spectrum: RGBA
Power: 240 W
Number / Power: 37x 8W

Connections
Current in NEUTRIK powerCON
XLR in/out 3pol / 5pol

Control
DMX 512: Yes
Number of DMX channels: 14

Technical data
Effect type: Fog machine
Heat output: 3100 W
Output: 2200 m³ fog/min
Tank capacity: 3.5 litres
consumption: @ 100% 390 ml/min
Warm-up time: 9 minutes

Hardware
Dimensions (L/W/H): 590 x 315 x 325 mm
Weight: 27,00 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=847&productgroup=30&productgroupmain=10

DJ POWER H-2VS Smoke Machine

DJ POWER

DJ Power H-2VS fog machine, perfect replacement for CO2 Shooter.

Properties
No annoying carbon dioxide tanks and hoses necessary
Vertical fog emission
RGB-LED wreath for coloring the fog
Unique fire simulations
LC display for operation
Instant fog stop
Mirror Pipe Patent

Technical data
LED type: 32 x 5 W RGB LEDs (11x red, 10 green, 11x blue)
Heat output: 3000 W
Output: 1529 mÑ/min
Tank capacity: 2.5 litres
Consumption @ 100%: 270 ml/min
Heating time: 4 minutes
Number of DMX channels: 11
DMX connection: 3/5-pin XLR in/output
Power supply: AC 220 V - 240 V / 50/60 Hz
Power consumption: 3100 W
Power Twist In/Output
Dimensions: 475 x 401 x 205 mm
Weight: 16 kg

Note
Use only with Stairville Fluids (recommendation: Stairville Fast Fog Fluid 209054).
Use of other fluids may cause damage to the unit which is not covered by the warranty.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1405&productgroup=30&productgroupmain=10

CONTROLite Win Design MK3 - Posi Fan

CONTROLite

WinDesign MK 3 Posifan

High-performance wind machine with enormous air movement performance of up to 1.25m3/sec., integrated into our ControLite Moving Base, which has been proven a thousand times over.
The ControLite WinDesign is suitable for the distribution of effect fog or the design of wind effects in theatres, film and television studios, discotheques and on show stages. Fan speed and positioning are controlled via DMX512.

Features
Control signal DMX 512
DMX control: 6 channel
XLR 5 pin in / out
Fan speed: max. 1400 rpm
Max. 1.25 cubic metres/second
Power consumption: max 300 W
Mains voltage : 230 V nominal, 50/60 Hz
Dimensions:
Total height: 72.0 cm
Width: 61,4 cm
Head depth: 28,5 cm
Weight: 25 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=184&productgroup=30&productgroupmain=10

ANTARI Lüfter AF 3X

ANTARI

Wind machine with DMX interface for stage and touring use

Properties
Compact, roadworthy metal housing with stand brackets
Suitable for use with fog, snow and soap bubble machines;
Control via rotary switch or integrated DMX interface
Air outlet angle variable
Low power consumption

Technical data
Power supply: 230 V AC, 50 Hz ~
Total connected load: 100 W
Max. air flow rate: 900 m³/h
Speed: 750 - 2250 rpm
DMX 512 connector: 3-pin and 5-pin XLR
Dimensions (WxH): 333 x 370 mm
Weight: 6 kg
Shipping weight: 6,45 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=404&productgroup=30&productgroupmain=10

CHAUVET Cloud 9

CHAUVET

The ground fog machine provides highly effective, deep-seated fog effects on stage or in ballrooms.

Continuous operation generates fog over an area of 300 m2 (3,230 ft2) in a robust flight case with locking rollers with a hinged lid to allow operation even when closed.
Control via an integrated digital display or DMX Integrated water drainage system makes cleaning quick and easy.
Use the heavy fog fluid (LLG) to create the CO2 effect, which lasts several minutes before it dissolves. Use without dry ice or CO2, therefore no special license/training required.

Effects
emissions 15,000 cfm
Low Fluid Shutdown
HDF- Best performance with long lasting fog on the ground;
PHF- double effect, flat ground fog with ascending haze formation

Dimensions and weights
Dimensions: 33.85 x 19.29 x 24.80 in (860 x 490 x 630 mm)
Fog outlet diameter: 4.76 in (121 mm)
Hose length max.: 8 ft (2.44 m)
Weight: 121.3 lb (55.8 kg)
Fluid Tank: 0.92 gal (3.5 l)
Water tank: 5.3 gal (20 l)
Fluid consumption: 29 ml/min (0.007 gal/min)
Water consumption (distilled water): 165 ml/min (0.044 gal/min)
maximum running time : 2 hours maximum at 100% output

Connections
Current Schuko on Seetronic Powerkon IP65
Power Input: Seetronic Powerkon IP65 (2x 120 V, 1x 230 V)
Data connection: 3- and 5-pin XLR

Control
Protocol: DMX
DMX channels: 2
Modes 1
On-Board control possible

Electrical properties
Input voltage: 120 VAC, 60 Hz or 230 VAC, 50 Hz
Power consumption: 2,600 W, 11.3 A @ 230 V, 50 Hz (230 V version)
Heating time: 3 min
Fuse protection 20 A (230 V version)

Certificates
CE
IP class: IP20, dry environment
Ambient temperature: -4 °F to 113 °F (-20 °C to 45 °C)
Temperature output @ 230V: 8.870 BTU per hour (max)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1568&productgroup=30&productgroupmain=10

ANTARI Lüfter AF 3R

ANTARI

Wind machine with radio control and DMX interface for stage and touring use

Properties
Compact, roadworthy metal housing with stand brackets
Suitable for use with fog, snow and soap bubble machines;
Comfortable control via handy radio transmitter W-1 with 50 m range;
Control also via rotary switch or integrated DMX interface
Air outlet angle variable
Low power consumption
PowerCon input and output

Technical data
Power supply: 230 V AC, 50 Hz ~
Total connected load: 100 W
Max. air flow rate: 900 m³/h
Supplied remote control: W-1
Range: approx. 50 m
Speed: 750 - 2250 rpm
DMX512 connector: 3-pin and 5-pin XLR
Dimensions (WxH): 33 x 370 mm
Weight: 6 kg
Shipping weight: 6,75 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=651&productgroup=30&productgroupmain=10

SAGITTER Tracer 1200W

SAGITTER

1200W Follow Spot
incl. stand

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=171&productgroup=29&productgroupmain=10

ROBERT JULIAT Victor 7-14,5° 1800 MSR

ROBERT JULIAT

Tracker (Daylight) for distances.20m - 60m in the power class from 1.800W-2500W with DMX dimmer

VICTOR is well in the limelight, because although it only requires a 1,800W discharge lamp, its light output can be compared to that of a 2,500W follower. This is due in part to the highly coated lenses of the optical unit. As with most Juliat trackers, the unit has a Boomerang colour changer magazine with 6 colours and a precisely working dimmer (mechanical)

Optionally, a horizontal aperture slider can be inserted into the slot of the gobo holder - and for the frost filter also an IR filter, as a heat shield for color filters. The Victor is delivered with an electronic ballast (EVG).

Properties
Light emission angle 7° -14.5°
For lamps MSR 1800W/DE, Sfa 15,5-6
Hot Restrike
Highly coated lenses (5)
Integrated Boomerang
Colour changer (6 colours)
Handles on three sides
Ergonomic operation
Manually retractable linear frost, CTB
Gobo (A-size) in the side slot
External electronic ballast (ECG)

Version in 2 versions with manual operation axial to the handrail or DMX 512 control
Only version with DMX darkener in rental park!

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=422&productgroup=29&productgroupmain=10

ROBERT JULIAT Lancelot 2-5º 4000W HTI

ROBERT JULIAT

4000W HTI Tracker, 2-5°

Properties
electr. ballast
man. Iris module
man. Shutter module
man. Chromix module
Universal gobo holder
Quartz glass double condenser and 6-lens optics for an extremely uniform and intense light beam;
Boomerang color changer system for 6 colors
Flicker-free, electronic ballast with hot restrike
100% closing iris module with heat shield for long service life with complete black-out

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=173&productgroup=29&productgroupmain=10

ROBERT JULIAT Aramis 4,5-8° 2500W HMI

ROBERT JULIAT

The Aramis is equipped with a powerful 2,500W HMI lamp and is designed for distances from 30 to 80m.

A special quartz glass lens in the condenser optics enables the Aramis to achieve a high efficiency. The zoom is adjusted via an automatically locking, robust handle. The Aramis is equipped with a weight levelling slide for fatigue-free operation, so that the chaser can be suspended at the correct angle to the stage.
It also has a gobo mount in the side slot carrier.

Properties
Highly coated quartz glass condenser optics for maximum light yield and a sharply focused light beam;
External magnetic or electronic ballast (flicker-free), low-noise hot restrike;
Ergonomic operation for fatigue-free working
Boomerang color changer system for 6 colors (optionally also with push/pull color changer system)
Manually retractable frost and CTO filter

Technical data
Dimensions: 1.490 x 505 x 550mm (with bracket)
Gobo size: B size
Power of the illuminant: 2.500W
Socket/lamp type: SFa21-12
Beam angle/zoom: 4.5°-8°
Ballast Hot Restrike, magnetic
Operating voltage/ supply voltage: 230/245V, 50Hz
Weight (without packaging): 59kg

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=296&productgroup=29&productgroupmain=10

ROBE RoboSpot Base Station without Camera

ROBE

The RoboSpot BaseStation allows the remote control of the BMFL FollowSpot or BMFL FollowSpot LT, specially developed moving head spotlights with an integrated RoboSpot Camera.
The RoboSpot BaseStation can also be operated with a separate RoboSpot MotionCamera. In this case, BMFL Spot, BMFL Blade, BMFL WashBeam, DL7S, DL4S, MegaPointe or Pointe can also be operated as remote controlled followers.
The RoboSpot BaseStation has a 15.6" HD touch screen, on which the operator can overlook what is happening on stage.
The picture is provided either by the RoboSpot Motion Camera with its own pan and tilt or by the RoboSpot Camera mounted directly on BMFL FollowSpot. The operator gets complete control over the FollowSpot with the help of the handles of the RoboSpot BaseStation, two programmable faders (e.g. for dimmer and zoom), four custom programmable jog wheels and ten assignable control buttons. The movement of the handles on the RoboSpot BaseStation is transmitted without delay to the connected spotlight selected as a chaser.
While the chaser operator is operating the chaser, all internal values and features of the chaser can be accessed via the connected mixing console. This makes it possible to use the chasers as full-fledged spotlights in the show and to operate them only as chasers from the BaseStation when required.
Up to twelve spotlights can be controlled simultaneously from one RoboSpot BaseStation.

Technical data
15.6 inch monitor
QVGA Robe Touchscreen with battery buffer
4 encoder wheels
10 preset buttons with direct access to pre-programmed functions
Activation and blackout button
Pan & Tilt "Freeze" button
Manual movement control with position indication on the monitor;
2 sliders on the handles for direct access to important functions 0 -100% (e.g. dimmer and iris), assignable to each function of the operated moving head spotlight (focus, zoom, frost, etc.)
User defined setup of the control channels
Saving and uploading of user-defined setups
Simultaneous control of only one headlamp possible
Power consumption 100 - 240 V, 50/60 Hz
Power consumption: 15 W
Mains power connector: Neutrik powerCON TRUE1
DMX and RDM data in/out: lockable 3-pin & 5-pin XLR
Network interface: RJ45
Video input: RJ45

Additionally, corresponding articles are required:
ROBE BMFL FollowSpot 5- 45° incl. camera
ROBE BMFL FollowSpot 3,5- 10° LT incl. camera
ROBE RoboSpot Motion Camera

Compatible lamps for ROBE RoboSpot Motion Camera are:
BMFL Spot, BMFL Blade, BMFL WashBeam, DL7S, DL4S, MegaPointe or Pointe

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=810&productgroup=29&productgroupmain=10

ROBE RoboSpot Motion Camera

ROBE

The RoboSpot MotionCamera is the remote camera for the ROBE RoboSpot tracking system when no BMFL FollowSpot is used.

The camera is a revolutionary moving-head with an integrated HD camera that can remotely control, pan, tilt, zoom and autofocus via DMX.

With a full HD camera and high light sensitivity up to 0.3 lux illuminance, the device provides a "first person view" for the follow operator to follow the artist across the stage.
Video signals are transmitted to the RoboSpot BaseStation via a Cat cable.

Additionally for the pursuit company corresponding articles are needed:
ROBE RoboSpot Base Station without camera

Compatible lamps for ROBE RoboSpot Motion Camera are:
BMFL Spot, BMFL Blade, BMFL WashBeam, DL7S, DL4S, MegaPointe or Pointe

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=812&productgroup=29&productgroupmain=10

ROBE BMFL FollowSpot ST 5- 45° incl. Camera

ROBE

The BMFL Followspot is the moving light specially developed for the ROBE RoboSpot System and equipped with a camera.

With the enormous brightness and 5-45° of the BMFL a REAL spot replacement.
The following other article is required for operation as a follow: ROBE RoboSpot Base Station with camera

Alternatively there is also the LT (long throw) variant of the BMFL FollowSpot

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=811&productgroup=29&productgroupmain=10

ROBE BMFL FollowSpot 3,5- 10° LT incl. Camera

ROBE

The BMFL Followspot LT is the LONG THROW version of the BMFL for the ROBE RoboSpot System, equipped with camera.

With the enormous luminosity and 3,5° - 10° of the BMFL a REAL spot replacement for larger locations.
The following other article is required for operation as a follow: ROBE RoboSpot Base Station with camera

Alternatively there is also the standard version of the BMFL FollowSpot with 5°-45°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=813&productgroup=29&productgroupmain=10

LDR Canto 2000 MSR Follow Spot

LDR

Properties
Double condenser optics Tracker for discharge lamp MSR 2000 FastFit;
Zoom optics
External ballast
Fan assisted ventilation
Safety double microswitch

Technical data
Beam angle: 8° - 22°
2000 MSR Gold FastFit PGJX50 750 hrs
2000 MSR Gold/2 FastFit PGJX50 750 hrs
Weight: 19,8 kg
Dimensions: 1020 x 420 x 220 mm

Scope of delivery
2 m connection cable
Iris diaphragm
Built-in mechanical dimmer
Pivot 28 mm
Filter frame

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1549&productgroup=29&productgroupmain=10

CLAY PAKY Shadow QS-LT

CLAY PAKY

1,2KW, Long Throw for distances between 15-50m incl. tripod

Properties
intelligent tracker for long distances
1200W discharge lamp
Adjustable control panel with user-friendly faders and buttons; standard 3.8° lens (optimal for distances of 30 - 50m)
Switchable 7.6° wide angle lens (optimal for distances 15-38m)
Color wheel with 7 colors, CTO and CTB correction filter
Gobo holder
0-100% iris, fader controlled, stepwise adjustable opening speed;
0-100% mechanical linear dimmer with strobe effect

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=172&productgroup=29&productgroupmain=10

ULTRALITE Dimmer D1225 12x2,5KW grey

ULTRALITE

Properties
Input: 32A CEE 5p
Output: 2x Harting HB16
Fuses: 12x 13A

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=193&productgroup=28&productgroupmain=4

MA LIGHTING Dimmer 12x 2,3kw without RCD

MA LIGHTING

MA Lighting Digital Dimmer 12x2,3KW without RCD

Properties
Sturdy coated 19"/ 3 U sheet steel enclosure with internal chassis;
Power class with permanent load resistant 2.300VA
Master/slave mode for simultaneous program call via MIDI in rack mode;
Control via DMX512
Connection cable with 32A CEE/400V

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=391&productgroup=28&productgroupmain=4

LSC GenVI 12x16 A Dimmer, 63A

LSC

GenVI is the latest generation of dimmer packs from LSC.

Gone are the "good old days" when you had to carry power distributors, dimmer and switchpacks and hot patches to every event. GenVI combines all devices in a compact, modern 3 U housing and makes work easier, especially in the newly developing LED spotlight market.

The GenVI series uses a good old dimmer technology which is a little bit more expensive but can control almost any kind of load without stress. PTFD which stands for Pulse Transformer Fired Dimming, dims resistive and inductive loads, LEDs with minimal current consumption (and that without the parallel connection of several 100 W bulbs under the stage), mirror ball motors and much more. And since dimming is already done with 16-bit technology today, GenVi is also equipped with the corresponding software.

Behind the name TruePower there is another useful function. If, for example, daylight or UV spots are to be switched, each channel can be reconfigured separately as a true relay. This is not a switch curve emulated by the software but a real relay. By means of the Auto-Power function the relays configured as TruPower.

Yes, and GenVI is also ideal for use as a power distributor. Because - each channel can be configured very easily from the DMX patch. Once configured, this channel and all other channels are switched on one after the other as soon as the GenVI is supplied with power. To protect the twelve channels GenVI has combined RCBO's. These are combinations of residual current circuit breakers (RCBO) and 2-pole disconnecting circuit breakers. In the event of shutdown by a residual current - the so-called earth fault - not the entire dimmer pack fails, but only the affected channel. For the user, this feature means increased safety during the entire production process.

GenVI combines all the features you can expect from a current dimmer as well as power distribution and power-distro systems in one device. Thanks to per-channel configuration, GenVI offers absolute flexibility on every job.
>br> Features
12x 16 A combination circuit breakers (2 poles + FI)
16 bit DMX mode optional
Trupower (triac bypass circuit) selectable per channel
Input: 63A CEE 400V plug
Outputs: 2x Harting 16E
PTFD - Pulse Transformer Fired Dimming - allows control of ANY load;
Resistive and inductive loads
CCT - Current Control Technology - controls large loads gently to protect lamps;
TruPower technology allows configuration of individual channels as relays;
Auto Power On/Off to automatically switch on the relay channels when a DMX signal is present;
Full-load capable
24/7 designed & tested
3 phase power supply for electronics
Overvoltage protection
Temperature monitoring
Overheating protection
Fan optionally temperature-controlled or constantly adjustable
Isolated DMX connections
300 µs
Touch screen lockable
RDM (Remote Device Management)
Software update via SD card

Technical description
Channels: 12
Power: 12x 16 A
Fuse / FI circuit breaker: combined FI/automatic circuit breaker (RCBO), 16 A, C-type, 2 poles, 0.03 A;
Fan temperature controlled

Control & Programming
Protocol USITT DMX 512 (RDM), RS 485 (in preparation)
DMX 512 channels12
Internal memory in preparation
Menu Display LCD touch screen, backlit
DMX 512 connector XLR 5 pole male/female
Power supply: CEE 63A 400V with connection cable
Power output: 2x HAN 16E

Settings
Top Set per channel: 100-0%
Preheat per channel: 0-100%
Dimmer curve adjustable per channel
TruPower - Configuration of individual channels as relays
Softpatch: yes
Channel test: 0-100%
Phase control: yes
Hold backup DMX value, backup memory

Technical data
Mains voltage: 190-260 V 45-65 Hz, 1 and 3-phase
Power consumption: max. 64 A at 230 V (per phase)

Dimensions/weight
Dimensions (L x W x H): 48.0 x 27.5 x 13.3 cm (19", 3 U)
Weight: 21 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=305&productgroup=28&productgroupmain=4

LSC GenVI 12x13 A Dimmer, 32A

LSC

GenVI is the latest generation of dimmer packs from LSC.

Gone are the "good old days" when you had to carry power distributors, dimmer and switchpacks and hot patches to every event. GenVI combines all devices in a compact, modern 3 U housing and makes work easier, especially in the newly developing LED spotlight market.

The GenVI series uses a good old dimmer technology which is a little bit more expensive but can control almost any kind of load without stress. PTFD which stands for Pulse Transformer Fired Dimming dims resistive and inductive loads, LEDs with minimal current consumption (and that without the parallel connection of several 100 W bulbs under the stage), mirror ball motors and much more. And since dimming is already done with 16-bit technology today, GenVi is also equipped with the corresponding software.

Behind the name TruePower there is another useful function. If, for example, daylight or UV spots are to be switched, each channel can be reconfigured separately as a true relay. This is not a switch curve emulated by the software but a real relay. By means of the Auto-Power function the relays configured as TruPower.

Yes, and GenVI can also be used excellently as a power distributor. Because - each channel can be easily configured from the DMX patch. Once configured, this channel and all other channels are switched on one after the other as soon as the GenVI is supplied with power. To protect the twelve channels GenVI has combined RCBO's. These are combinations of residual current circuit breakers (RCD) and 2-pole disconnecting circuit breakers. In the event of shutdown by a residual current - the so-called earth fault - not the entire dimmer pack fails, but only the affected channel. For the user, this feature means increased safety during the entire production process.

GenVI combines all the features you can expect from a current dimmer as well as power distribution and power-distro systems in one device. Thanks to per-channel configuration, GenVI offers absolute flexibility on every job.

Features
12x 13 A Combi-automats (2 poles + FI)
16 bit DMX mode optional
Trupower (triac bypass circuit) selectable per channel
Input 32A CEE 400V plug (no 13A can be used simultaneously for all 12 channels !)
Outputs 2x Harting 16E
PTFD - Pulse Transformer Fired Dimming - allows control of ANY load;
Ohmic and inductive loads
CCT - Current Control Technology - controls large loads gently to protect lamps;
TruPower technology allows configuration of individual channels as Relay;
Auto Power On/Off to automatically switch on the relay channels when a DMX signal is applied;
Full-load capable
24/7 designed & tested
3 phase power supply for electronics
Overvoltage protection
Temperature monitoring
Overheating protection
Fan optionally temperature controlled or constantly adjustable
Isolated DMX connections
300 µs
Touch screen lockable
RDM (Remote Device Management)
Software update via SD card

Technical description
Channels: 12
Power: 12x 13 A theoretically, because of 32A connection plug total 3x 32A (12x 8A)
Fuse / RCD Circuit breaker: combined RCD/automatic circuit breaker (RCBO), 13 A, C-type, 2-pole, 0.03 A;
Fan temperature controlled

Control & Programming
Protocol USITT DMX 512 (RDM), RS 485 (in preparation)
DMX 512 channels12
Internal memory in preparation
Menu Display LCD touch screen, backlit
DMX 512 connector XLR 5 pole male/female
Mains connection: CEE 32A 400V with connection cable
Power output: 2x HAN 16E

Settings
Top Set per channel: 100-0%
Preheat per channel: 0-100%
Dimmer curve adjustable per channel
TruPower - Configuration of individual channels as relays
Softpatch: yes
Channel test: 0-100%
Phase control: yes
Hold backup DMX value, backup memory

Technical data
Mains voltage: 190-260 V 45-65 Hz, 1 and 3-phase
Current consumption: max. 52 A at 230 V (per phase)

Dimensions/weight
Dimensions (L x W x H): 48.0 x 27.5 x 13.3 cm (19 inch, 3U)
Weight: 18,5 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=304&productgroup=28&productgroupmain=4

Hand dimmer DS-2 RF 1x10A DMX

STAIRVILLE

Compact 1-channel DMX dimmer with fader

Properties
The DS-2 can be set as a dimmer or switch pack via the menu.
DMX addressing and setting of functions via display
DMX input and output: 3-pin XLR !!!
Power supply: AC 230V ~ 50 Hz
max. power 10 A

source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=192&productgroup=28&productgroupmain=4

CAMCO Dimmer 12x16A Model 1216

CAMCO

Properties
32A CEE connection
Fuses 12x 16A

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=194&productgroup=28&productgroupmain=4

AVOLITES ART 2000 Powerrack 48ch DIM

AVOLITES

The ART2000 system offers a complete solution for dimming conventional lamps as well as for the power supply of moving lights.

Separate power distribution systems are no longer required, resulting in shorter set-up times and simpler setups for shows of all kinds. The tour versions of the Avolites dimmers are built in a modular design, so that in case of service a single plug-in unit can be replaced in a few easy steps instead of having to replace the whole unit.
With the ART2000 up to 48 channels can be controlled. Up to 4 modules with max. 12 channels each can be used.

The following module variants are available:
12-channel 16 A dimmer module
12-channel 16 A fixed current module, for example for moving lights

Modules with the same number of channels can be interchanged at will, allowing the racks to be configured for any application.

Additional features
DIGI ammeter (digital multifunction meter)
Rack splitter 2x 1 in/5 out
Current distributor (with automatic circuit breakers, FI circuit breaker 30mA)
Patch panel Wieland GST 18/3
Fixed current output 1xCEE 32A 5pole
Fixed current outlet 3xCEE 16A blue
20 x hard input output
Powerlock in and out
Ground point

During the development of the Avolites dimmers, special attention was paid to the best possible interference suppression (240 µs rise time).
Also the DMX functionality (each channel can be patched individually or in blocks to two universes) has proven itself many times over.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=159&productgroup=28&productgroupmain=4

AVOLITES ART 2000 Powercube

AVOLITES

Dimmer system

Properties
12*10A Dimmer circuits
6x 10A combined dimmer fixed circuits
6x 16A fixed circuits
8x Harting HAN16E output (1/9)
Three 63A single residual current circuit breakers 30mA
Two CEE blue 16A outlets
Connection cable 1,5m 5x10qmm with 63A CEE 5pin plug
Compact dimensions: 50 x 52 x 43 cm (WxHxD), including lids;
DMX512 input with two galvanically isolated splitter outputs;
ART2000 features such as blockwise or channelwise patching;
Dimmer curve, preheat and limit adjustable per channel
Twelve memory locations can be edited and recalled remotely;
18 knobs for local control of the dimmers
12 rotary knobs for controlling the memory locations

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=160&productgroup=28&productgroupmain=4

WIRELESS SOLUTION F-1 G4S MK2 W-DMX

WIRELESS SOLUTION

Properties
Wireless DMX Indoor
Transmitter or receiver for 512DMX channels
2.4GHz & 5.8GHz
incl. power cord / Schuko Powercon
Mode: G3/ G4/ G4S

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=420&productgroup=27&productgroupmain=4

WIRELESS SOLUTION BlackBox R-512 G4 Mk2, W-DMX Rec

WIRELESS SOLUTION

Wireless Solutions BlackBox R-512 G4 Mk2, W-DMX Receiver

The Wireless Solution W-DMX™ technology achieves the highest possible operational reliability through adaptive frequency hopping and offers a patented method for the correction of transmission errors as well as the proven One-Button-2-Go technology.
Furthermore, all Wireless Solution BlackBox models have a universal 90-250V power supply and can also be operated with 12V.
All G4 devices are fully compatible with Wireless Solution Generation 3, which offers the advantage that both generations can be combined in one system.

Features
Safe W-DMX™ Technology
Compatible with all G3 devices
Plug-and-play capability
One-Button-2-Go technique
Receiver for 1 DMX universe

Technical data
Power supply: 90-250V, 50/60Hz
DMX channels: 512 (1 universe)
Using multiple receivers: 32 DMX universes
Frequency response: 2.45 / 5.8 GHz
Max. distance: 700m
Dimensions (WxDxH): 234x150x60mm
Weight: 0,23kg
Scope of delivery 1x Dualband Antenna Outdoor V3
1x antenna adapter
1x 12V connector
1x 19" rack angle

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=413&productgroup=27&productgroupmain=4

WIRELESS SOLUTION F-1 G4 IP65, W-DMX

WIRELESS SOLUTION

Properties
WDMX Outdoor
Transmitter or receiver for 512DMX channels
2.4GHz & 5.8GHz
Mode: G3/ G4/ G4S
incl. antenna

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=191&productgroup=27&productgroupmain=4

USV APC Smart-UPS RM 1500VA RM

APC

Properties
UPS for uninterruptible power supply
Output power: 980W / 1500VA
Output voltage: 4x 230V
Cold appliance socket incl. power cable

Optional
Adap. Powercon input/blue
Adap. Cold appliance plug to Schuko distributor
Adap. Cold appliance plug on Schuko coupling

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=331&productgroup=27&productgroupmain=4

MADRIX Key ultimate V3.X

MADRIX

Madrix 3 Professional LED Lighting Controller

Madrix is a very powerful yet easy to use software for LED lighting control.
The software enables the realization of various LED projects and lighting designs in 2D (Pixel Mapping) as well as in real, spatial 3D (Voxel Mapping). Lighting effects, graphics and animations are generated live and in real-time.
The large amount of content can be fully customized (in speed, color, shapes, direction, size, motion, position, brightness, etc). New slides and scenes can be easily created in seconds by the user.
Madrix also offers the possibilities of a video server: photos, images and videos can be easily loaded and played back as well as live video signals, screen capturing, scrolling text and more.
Three real-time preview windows including 2D or 3D display, zoom and rotation allow a full overview of the output. You can easily switch between the two video decks via crossfader. The license is activated via a USB dongle and can be used flexibly on different computers as required. Several Madrix licenses can be used in parallel.

Special properties
Pixel Mapping (2D) and Voxel Mapping (3D)
Media server functions
Effect Generator and Render Engine
Supports DMX512, ArtNet, sACN and more
Remote control via DMX-IN, ArtNet Remote, MIDI-IN, Remote HTTP
Time Code via ArtNet, MIDI, SMPTE or system time
256 DMX universes, 2x DVI-Out (Ultimate !)
Patch Editor
Fixture editor and extensive library
256 x 256 storage spaces for organizing effects supported in WYSIWYG R23 or higher;
Touchscreen Interface

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=470&productgroup=27&productgroupmain=4

MA LIGHTING VPU plus MK2, Video Processing Unit

MA LIGHTING

With the MA VPU (Video Processing Unit) MA Lighting has developed a series of powerful solutions for the control, live access and modification of videos, images and 3D objects.

All videos, images and 3D objects can be scaled, positioned, tiled, coloured and modified directly from any grandMA2. All these functions are structured so simply that operating the MA VPU is no more complicated than operating another fixture. The MA VPU only needs to be integrated into the network session.
No additional parameters are required to control the MA VPU. Thanks to the MA philosophy, the operation is extremely intuitive. Users who are already familiar with grandMA2 will have no problems with the MA VPU. In addition, the free MA VPU software includes a Teaser Mode that allows two layers with limited resolution to be played back from a Windows computer.
Thanks to the performance of the MA VPU's new HAP codec all videos can now be displayed in larger than Full-HD.
Furthermore, the internal output synchronization of the MA-Net2 guarantees the highest possible frame and DMX synchronicity. Powerful functions such as vertical and horizontal soft edge blending or keystone correction are also included in the scope of functions. Videos can be scaled to any desired size. In addition, the MA VPU has a convincing 3D keystoning function, which allows content to be placed on any 3D object, regardless of its shape or size. In addition, frame interpolation and smooth speed control can be used to adjust the playback speed. In addition, the MA VPU offers a number of functions, features and effects such as frame blending, colour boost, dynamic colour key, contrast, brightness, saturation as well as blur, sepia, greyscale, wave, invert and much more. The application is comfortable and self-explanatory. So you can also easily create and control combinations of videos and images.

The MA VPU supports JPEG and Windows bitmap images like *.bmp and *.gif as well as *.png with alpha channel. Up to 32 3D video layers are possible. Via grandMA2 the MA VPU can also be programmed in blind and preview mode.
This means that the MA VPU follows the console in blind mode, which makes programming much easier. The MA VPU also allows a single-layer transition, where the user no longer has to select the display layers himself. He can program everything on one layer, and the times can also be programmed individually.
All three MA VPU versions, MA VPU plus MK2, MA VPU basic MK2 and MA VPU light are optimized for transport and daily tour use. Each MA VPU also offers 17GB pre-installed content.

Features
Comfortable and fast configuration, programming, operation, content distribution and software updates via any grandMA2;
Best integration for immediate work
Blind and preview programming possible (switchable from the console)
Built-in EDID manager for correct assignment of output
Powerful Pixel Mapper functionality - DVI output and Pixel Mapper can be used in parallel;
Highest possible frame and DMX synchronization
Extremely low latency when integrating live video (MA VPU plus MK2 and MA VPU basic MK2)
Comfortable 3D keystoning and soft edging
Efficient backup solution - one MA VPU can serve as a backup for any other MA VPU on the network
Built-in text ticker and test pattern generator
Layer reference option: Each layer can be used as input for any other layer;
Professional sound playback (with ground lift)
Best hardware components, encapsulated and decoupled, guarantee excellent performance and extreme reliability

Technical data
Operating voltage/ supply voltage 120V/230V, 50/60Hz (switches automatically)
Power 400VA
Dimensions 484 x 211 x 627mm / 19 x 8.3 x 24.7inch
Weight (without packaging) 15kg / 33lbs
Connectors on the output side:
3 x DVI
2 x XLR
3pin sound (balanced)
2 x etherCON
2 x USB
1 x eSATA
1 x PowerCON out
Connectors on the input side:
1 x powerCON In
2x SDI

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=301&productgroup=27&productgroupmain=4

MA LIGHTING Tour Pack for MA onPC command wing

MA LIGHTING

For everyday road use, the Tour Pack consists of a pre-configured HP All-in-One Touch PC (HP Compaq Elite 8300 All-in-One Touch PC with Windows 7) plus monitor stand and protective cover.
The hardware is built into a case for safe and comfortable transport. The Tour Pack is designed to be equipped with an existing MA onPC command wing.

Scope of delivery:
MA Tour Pack for MA onPC command wing
incl. Case and HP All-in-One Touch PC
incl. GrandMA OnPC software pre-installed
incl. Y-cable for mains connection

OPTIONAL:
MA onPC Commandwing

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=302&productgroup=27&productgroupmain=4

MA LIGHTING Network Switch, FIBERFOX LWL (MM)

MA LIGHTING

MA Lighting certified network switch with fiber optic connection for lighting control networks

Features
Simplicity: Easy setup and management
MA DNA: Support and reliability guaranteed
Developed for lighting engineers: Works with standard light protocols
Performance: All ports operate in the Gigabit range
Network: Compatible with IEEE 802.3ab Gigabit Ethernet

Technical data
Operating voltage/ supply voltage 100/240V, 50/60Hz (switches automatically)
Powermax. 100VA
Dimensions 483 x 43 x 264mm / 19 x 1.69 x 10.4inch
Weight (without packaging) 3.7kg / 8.2lbs
Connectors on the output side:
9x etherCON
2x prepared SFP Cages for Mini-GBIC
2x Fiberfox EBC1502 incl. Mini-GBIC
Connectors on the input side:
1 x powerCON
1 x USB type B

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=320&productgroup=27&productgroupmain=4

MA LIGHTING Lightcommander 48/6

MA LIGHTING

Features
255 circles
48/96 Fader
Housing made of sturdy, coated sheet steel with solid wood side panels;
Channel doubling in wide mode
Live and blind mode for programming and modifying
Master/Slave function and MIDI
Sequences accessible via X-fader with full graphic display
Saving the programs on RAM card
Softpatch with 255 DMX channels
Program sequences with freely selectable times
Learn-Speed button for direct input of the running light cycle
DMX and parallel 54-channel analog output (LC ll 48/6)

Technical data
Dimensions: 1190 x 620 x 135mm (l/w/h)
Weight: 24.0kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=157&productgroup=27&productgroupmain=4

MA LIGHTING Lightcommander 24/6

MA LIGHTING

24 channel light mixer, expandable to 48 channels, DMX, work with stage sets, chases and single groups possible

Features
255 circles
24/48 Faders
Housing made of sturdy, coated sheet steel with solid wood side panels
Channel doubling in wide mode
Live and blind mode for programming and modifying
Master/Slave function and MIDI
Sequences accessible via X-fader with full graphic display
Saving the programs on RAM card
Softpatch with 255 DMX channels
Program sequences with freely selectable times
Learn-Speed button for direct input of the running light cycle
Dimensions: 740 x 620 x 135mm (L/W/H)
Weight: 16.0kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=156&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 8Port Node

MA LIGHTING

The grandMA3 8Port Node is MA Lighting's largest converter for converting network data to DMX.
Specially designed to output eight DMX universes synchronously from each grandMA3 session, the Node, housed in a 19"/1RU enclosure, is perfectly suited for touring and fixed installations.
All grandMA3 xPort Nodes are designed to meet the ever-increasing demands of touring and fixed installations.
The Nodes provide a secure and stable backbone for synchronized data transport. To ensure easy access to DMX output and input, all nodes are remotely configurable from a console or onPC in the session.

Features
Power: max. 15VA
Connectors: 1 powerCON TRUE1
1 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1386&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 onPC 8Port Node 4K

MA LIGHTING

The grandMA3 onPC 8Port Node 4K in combination with grandMA3 onPC 4.096 enables parameters and provides eight DMX outputs on the rear panel.

Installed in a 19"/1RU chassis this Node is the most powerful network to DMX converter of the grandMA3 onPC series and is perfectly suited for touring and fixed installations.
MA Lighting offers the perfect solution to enter the world of lighting control. Simply download the free grandMA3 onPC software.
In combination with a PC and a MA onPC product parameters can be unlocked.

Features
Parameter Mode3: 4,096 (HTP/LTP)
Parameter Mode2: 2.048 (HTP/LTP)
Power: max. 15VA
Connectors: 1 powerCON TRUE1 1 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1385&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 Processing Unit M

MA LIGHTING

By adding grandMA3 processing units a grandMA3 system can be expanded very easily.
The grandMA3 processing unit M extends the system by 4,096 parameters and offers the system designer the possibility to scale the lighting control system in small steps.
In addition to the powerful CPU for frame-synchronous calculation, the grandMA3 processing unit M also offers Mode2, which allows existing grandMA2 systems to be expanded by 4,096 parameters, like the NPU from series 2.

Features
Parameter Mode 3: 4.096 (HTP/LTP)
Parameter NPU Mode 2: 4.096 (HTP/LTP)
Power: max. 200VA
Connectors:
1 powerCON TRUE1
2 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=842&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 Processing Unit L

MA LIGHTING

The grandMA3 processing unit L expands the system by 8,192 parameters and offers frame-synchronous calculation of parameters within the MA-Net3 environment.
The L-model is designed for larger systems and offers a more cost-effective and compact solution for parameter expansion.
In addition, the grandMA3 processing unit L offers an NPU Mode 2 for expanding existing grandMA2 systems by 4,096 parameters.

Features
Parameter Mode3: 8,192 (HTP/LTP)
Parameter Mode2: 4.096 (HTP/LTP)
Power: max. 200VA
Connectors: 1 powerCON TRUE1
2 etherCON/RJ45
8 DMX512-A Out (5pin XLR female)
3 USB 2.0 (Type A)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=931&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 light

MA LIGHTING

The grandMA3 light is the workhorse of the grandMA3 series and offers the perfect combination of power and size.

The grandMA3 light is suitable for any kind of application and is also the right choice for demanding productions.
This makes it probably the most versatile console on the market.
With its 60 physical playbacks, 16 assignable x-keys and the dedicated master playback section the grandMA3 light offers a wide range of playback possibilities. Large multi-touch monitors provide instant access to programming tools and are fully configurable for individual requirements. The two letterbox monitors behave in a context-sensitive way and provide feedback and options for the grandMA3 playback and encoder hardware.With its 8,192 control parameters grandMA3 light is the perfect base platform for the world's most prestigious entertainment lighting applications.
The system size is scalable up to 250,000 parameters using grandMA3 processing units. The grandMA3 light is compatible with grandMA2 and grandMA3 software. Its hardware is ergonomically optimized and can be classified as a silent version by default.

The Grand MA 3 light can also be started natively in "Grand MA2 Mode" max. parameter in Mode3: 8.192 max. parameter in Mode2: 4.096

Features
Real-time control of up to 250,000 parameters per session in combination with grandMA3 processing units;
6 DMX outputs, 1 DMX input
2 internal multitouch screens in foldable monitorwing
2 internal letterbox multitouch screens
2 internal multitouch command screens
2 external multitouch screens can be connected
41 rotatable RGB backlit encoders
5 backlit dual encoders
15 motorized and backlit 60mm faders
60 independent playbacks
16 assignable x-keys
Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
3 etherCON and 6 USB ports
2 backlit and motorized A/B 100mm faders
Individually backlit, dimmable and low-noise (clickless) buttons

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=840&productgroup=27&productgroupmain=4

MA LIGHTING grandMA3 full-size

MA LIGHTING

The grandMA3 full-size console is the flagship of the grandMA3 series.

The console offers the ultimate MA Lighting control hardware and is designed to provide an uncompromising solution for professional users who value absolute flexibility. The freely assignable Level Wheel section and the dedicated Master Playback area provide quick access to a powerful range of functions. The grandMA3 full-size with its 120 physical playbacks and 16 assignable x-keys offers the most flexible playback platform MA Lighting has ever produced.
With its 12,288 control parameters the grandMA3 full-size console is the perfect base platform for the world's most prestigious entertainment lighting applications. The system size is scalable up to 250.000 parameters with the help of grandMA3 processing unit. Large multi-touch monitors provide instant access to programming tools and are fully configurable for individual requirements. The three letterbox monitors are context sensitive and provide feedback and options for the grandMA3 playback and encoder hardware. The grandMA3 full-size is compatible with the grandMA2 and grandMA3 software. Its hardware is ergonomically optimised and can be classified as a silent version by default.

The Grand MA 3 can be started in "Grand MA2 Mode" max. parameters in Mode3: 12.288 max. parameters in Mode2: 8.192

Features
Real-time control of up to 250,000 parameters per session in combination with grandMA3 processing unit;
6 DMX outputs, 1 DMX input
3 internal multitouch screens in foldable monitorwing
3 internal letterbox multitouch screens
2 internal multitouch command screens
2 external multitouch screens can be connected
2 multifunctional level wheels
2 multifunctional single encoders
71 rotatable RGB backlit encoders
5 backlit dual encoders
30 motorized and backlit 60mm faders
120 independent playbacks
16 assignable x-keys Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
3 etherCON and 6 USB ports
2 backlit and motorized A/B 100mm faders
Individually backlit, dimmable and low-noise (clickless) buttons

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=841&productgroup=27&productgroupmain=4

MA LIGHTING grandMA2 ultra light

MA LIGHTING

The grandMA2 ultra-light has the full networking capability of the grandMA2 series.
All controls are located in the same place as on the larger console models. With its 4,096 parameters and six DMX outputs the grandMA2 ultra-light is also perfect as a back-up solution. Thanks to the grandMA2 ultra-light all features of the series 2 are also available for smaller shows and budgets. This includes intuitive and fast control of all lighting worlds and an almost unlimited number of presets, cues, pages, sequences and effects.

Features
Real-time control for up to 65,536 parameters per session in conjunction with MA NPU (corresponds to 256 DMX universes)
4,096 HTP/LTP parameters
6 DMX Outputs
1 internal TFT wide touch screen (15.4\" WXGA)
2 external TFT screens can be connected (UXGA, can be touch screens;
1 internal command screen - multi-touch (9\" SVGA)
15 Executor motor faders
Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
2 Ethercon connectors
4 USB 2.0 ports
Motorized Monitor-Wing
2 motorized A/B faders 100mm
Individually backlit and individually dimmable, noiseless buttons;
Optional with two external screens

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=146&productgroup=27&productgroupmain=4

MA LIGHTING grandMA2 light

MA LIGHTING

The grandMA2 light has 4,096 parameters, 15 executor motor faders and two touch screens. All other features and controls are identical to the grandMA2 full-size.
The grandMA2 light is the perfect tool for controlling white lights, moving lights, LEDs and media servers. The console offers intuitive and fast control of all fixtures and channels and can handle an almost unlimited number of presets, cues, pages, sequences and effects. It is ideal as a stand-alone console or back-up solution for the grandMA2 full-size. Furthermore the console is compatible with "Series 1".

Features
Real-time control for up to 65,536 parameters per session in conjunction with MA NPU (corresponds to 256 DMX universes);
4,096 HTP/LTP parameters
6 DMX outputs
2 internal TFT wide touch screens (15.4 inch WXGA)
2 external TFT screens can be connected (UXGA, can be touch screens) 1 internal command screen - multi-touch (9 inch SVGA)
15 Executor motor faders
Integrated keyboard drawer
Built-in uninterruptible power supply (UPS)
2 Ethercon connectors
5 USB 2.0 ports
Motorized Monitor-Wing
2 motorized A/B faders 100mm
Individually backlit and individually dimmable, noiseless buttons
Optional with two external screens

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=145&productgroup=27&productgroupmain=4

MA LIGHTING grandMA2 full-size

MA LIGHTING

MA LIGHTING

The MA 8Port Node is the suitable solution if a large number of DMX universes are to be converted at the same location.

Likewise, the MA 8Port Node provides the same number of DMX outputs as the MA NPU (Network Processing Unit).
The eight DMX outputs and the main switch, a powerCON and etherCON connector, are located on the rear panel.
The MA 8Port Node is designed as a 19 inch/1RU built-in unit.

Technical data
Operating voltage/ supply voltage: 100V-240V, 50/60Hz
Power: 30VA
Dimensions: 482.5 x 43 x 189mm / 19 x 1.7 x 7.4inch
Weight (without packaging): 2.4kg / 5.3lbs
Connectors on output side: 8 x XLR 5pin (DMX), 1 x CTRL (future use), 1 x etherCON
Connectors on the input side: 1 x powerCON, 1 x USB

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=292&productgroup=27&productgroupmain=4

MA LIGHTING 4Port Node

MA LIGHTING

The MA 8Port Node, MA 4Port Node, MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) can be used to convert Ethernet data to DMX and vice versa

At the same time all products work with 1Gbit/s bandwidth. This allows them to seamlessly integrate into the grandMA2 system and its MA-Net2, which is based on this speed to ensure maximum performance.
All products are designed for everyday touring as well as for installations and are therefore equipped with a robust steel housing. In addition to a menu button, the nodes also have a USB port, a 2" colour TFT display and status LEDs for quick and easy configuration.
All MA xPort Nodes can be configured completely via a grandMA2 console or via grandMA2 onPC.
It is also possible to define how each individual DMX port should be used - whether as input or output.
In addition, the MA xPort Nodes are also available as onPC version, which allows to enable parameters for onPC workstations (more information under MA onPC Solutions).

The MA 4Port Node is the right solution if a medium number of DMX universes are to be converted at the same location. The standard version of the MA 4Port Node is available in a 9"/1U housing with the connectors on the back.
With the help of a special installation kit this version can also be installed in a 19" rack.
In addition, a cover is available that has all the rear connectors of the MA 4Port Node and can be placed on the side of the MA 4Port Node. In this way, the connections are also accessible from the front when the MA 4Port Node is installed in a rack.
As a further option, two MA 4Port Node can be connected to each other via special fasteners and thus installed in a 19" rack. Finally, there is the option to rig the devices using couplers or hooks.
The four DMX outputs, the main switch as well as a powerCON and etherCON connector are located on the rear panel.

Features
MA-Net2, Art-Net and sACN with 1Gbit/s
Completely configurable via grandMA2 consoles/grandMA2 onPC
2" color TFT display
Rugged steel housing for everyday touring or rigging
Mountings for the MA 2Port Node and MA 4Port Node available (see accessories);
Also available as onPC version for enabling output parameters (see MA onPC solutions)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=793&productgroup=27&productgroupmain=4

Mit dem MA 8Port Node, MA 4Port Node, MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) lassen sich Ethernet-Daten in DMX umwandeln und umgekehrt.

Gleichzeitig arbeiten alle Produkte mit 1Gbit/s Bandbreite. Damit fügen sie sich nahtlos in das grandMA2 System und sein MA-Net2 ein, das auf dieser Geschwindigkeit basiert, um eine größtmögliche Leistung sicherzustellen.
Alle Produkte sind für den Tour-Alltag, aber auch für Installationen konzipiert und daher mit einem robusten Stahlgehäuse ausgestattet. Neben einem Menü-Knopf verfügen die Nodes für eine einfache und schnelle Konfiguration auch über einen USB-Anschluss, ein 2" Farb-TFT-Display und Status-LEDs.
Alle MA xPort Nodes lassen sich vollständig über ein grandMA2 Pult oder über grandMA2 onPC konfigurieren.
Dabei lässt sich ebenfalls festlegen, wie jeder einzelne DMX-Anschluss genutzt werden soll – ob als Ein- oder Ausgang.
Darüber hinaus sind die MA xPort Nodes auch als onPC Version erhältlich, mit deren Hilfe sich Parameter für onPC Arbeitsplätze freischalten lassen (mehr dazu unter MA onPC Solutions).

Der MA 4Port Node ist die passende Lösung, wenn eine mittlere Anzahl von DMX-Universen an örtlich gleicher Stelle gewandelt werden soll. Als Standardversion gibt es den MA 4Port Node in einem 9"/1HE Gehäuse mit den Anschlüssen auf der Rückseite.
Mit Hilfe eines speziellen Einbau-Kits lässt sich diese Version auch in ein 19" Rack einbauen.
Zusätzlich ist eine Blende erhältlich, die alle rückseitigen Anschlüsse des MA 4Port Node besitzt und seitlich an diesen gesetzt werden kann. Auf diese Weise sind beim Rack-Einbau des MA 4Port Node die Anschlüsse auch von der Vorderseite zugänglich.
Als weitere Möglichkeit lassen sich zwei MA 4Port Node miteinander via spezieller Befestigungen verbinden und so in ein 19" Rack einbauen. Abschließend besteht die Option, die Geräte mithilfe von Couplern oder Haken zu riggen.
Die vier DMX-Ausgänge, der Hauptschalter sowie ein powerCON und etherCON Anschluss sind auf der Rückseite untergebracht.

Features
MA-Net2, Art-Net und sACN mit 1Gbit/s
Vollständig über grandMA2 Pulte/grandMA2 onPC konfigurierbar
2" Farb-TFT-Display
Robustes Stahlgehäuse für den Tour-Alltag oder zum Riggen
Befestigungen für den MA 2Port Node und MA 4Port Node erhältlich (siehe Zubehör);
Auch als onPC Version zur Freischaltung von Ausgabeparametern verfügbar (siehe MA onPC solutions)

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=793&productgroup=27&productgroupmain=4

MA LIGHTING 2Port Node onPC Pro

MA LIGHTING

As a special feature, the MA 2Port Node onPC, in stand-alone operation with grandMA2 onPC, offers the possibility to output 512 DMX parameters (1,024 in case of the MA 2Port Node onPC PRO).

This makes the MA 2Port Node onPC a powerful tool for smaller applications.
It also offers a practical back-up for smaller budgets.

The MA 2Port Node onPC versions have an integrated power supply, but can also be powered via Ethernet.

All MA 2Port Nodes onPC are fully integrated into the MA system. This means they are easy and comfortable to set up via a console or grandMA2 onPC. But they can also be used in other systems because they speak MA-Net2, MA-Net, sACN and Art-Net, which can be set remotely.

Rigging box for flexible use in trusses or mobile facilities;
MA 2Port Node onPC in combination with grandMA2 onPC
Powerful controller for smaller applications
Handy emergency system for smaller budgets
512 parameters (MA 2Port Node onPC) or 1,024 parameters (MA 2Port Node onPC PRO);
DMX input for fader/console extensions and merging of DMX signals;
Integrated into the MA system via MA-Net2/MA-Net
Stand-alone use with any MA-Net2, sACN system or Art-Net system;
Power supply via Ethernet or internal power supply unit
Simple and convenient remote configuration including determination of inputs and outputs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=151&productgroup=27&productgroupmain=4

LUMENRADIO CRMX Nova TX DMX, Wireless TM

LUMENRADIO

Function: wireless DMX transmitter
Wireless modes: Transmitter
Frequency band: 2.4 GHz
Adaptive frequency hopping: Yes
Transmission/reception power: 10, 50, 100, 300 mW selectable Max.
Radio range: approx. 500 m
RDM feedback: No
W-DMX Compatible: No
Power over Ethernet: Yes** depending on environment (terrain, buildings, people)

Control & Programming
ProtocolUSITT DMX-512DMX
512 channels 512 (1 DMX line)
Menu display: Various status LEDs
DMX 512 connection
1x XLR 5 pin female
EtherNet-(network connection): no
Antenna connection 1x TNC male
USB connection: No

Technical data
Internal power supply (external) Mains voltage 85-264 V 47-70 Hz (12 V DC);
Power consumption 0.015 A (0.5 A)

Housing
Material anodised extruded aluminium profile
Colour black
Housing protection class: IP 20

Dimensions/weight
Dimensions: (L x W x H)11.0 x 4.4 x 16.0 cm
Weight: 0.7 kg
Mounting: Desktop/T-threaded bolt M8 for hook/clamp

Special features
"One-button operation"
Field strength display
Adaptive frequency hopping
Co-Existence to all standard 2.4 GHz products
DMX error correction
DMX Frame Rate & Size Auto Sensing
Lock function
Firmware Upgrade via XLR interface
ESD-protected interfaces
Self-resetting mains fuse
Internal power supply unit
Reverse polarity protected 12 V DC input
T-threaded bolt M8 for hook/clamp

Accessories included
Power cable for cold appliances
1x antenna RP-TNC 2 dBi
DC connector male
T-threaded bolt M10

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=188&productgroup=27&productgroupmain=4

LLT DMX-Splitter/Merger SMS 28 ARTNET

LLT

The SMS 28 is a magician with DMX signals and combines functions for which one would otherwise need several devices in a compact 1U - 19\\\" housing.

The plug-in unit has 2 DMX inputs and 8 galvanically isolated and buffered outputs, a display, mode selector switch and a 3-digit DMX channel selection.
The power supply can be used worldwide for voltages between 90 and 240VAC. XLR connectors can be mixed and matched in 3p or 5p.

Also available are RJ45 connectors in a uni-flange housing.

Many functions that can be selected via a selector switch are available:
Conventional splitter 1 in 8 with backup function (last received data is output)
Conventional splitter for 2 lines of 4 outputs each with backup merge 2 in 1 HTP: The highest value of both DMX lines is used;
Merge 2 in 1 LTP-A: If line A fails, the system switches to line B
Merge 2 in 1 LTP-B: If line B fails, the system switches to line A
Merge 2 in 1 Shift: Line B is appended to line A. The channel where the merge starts is adjustable The sum signal of all merge functions is available at outputs 1-8
Split & Shift: The signal of line A is output at outputs 1-4 in the original, at 5-8 line A is output from channel X starting with 001, where X is adjustable. All channels before X are omitted. In this way, 2 systems can be fed with one DMX line even if one of the systems cannot be configured differently than starting at 001.

The Artnet version of the SMS 28 can be recognized by a network connector on the front.
It receives two DMX universes A and B and treats them in the same way as if they were DMX signals at inputs A or B.
DMX functionality is fully maintained, Artnet signals have priority over DMX and automatically switch the unit to Artnet mode. A reset button on the front panel sets the Artnet processor to factory default with a known IP address (IPV4).
The respective MAC address is specified on the device.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=303&productgroup=27&productgroupmain=4

Der SMS 28 ist ein Zauberkünstler mit DMX-Signalen und vereinigt Funktionen, für die man sonst mehrere Geräte bräuchte, in einem kompakten 1HE - 19\\\" - Gehäuse.

Der Einschub besitzt 2 DMX-Eingänge und 8 galvanisch getrennte und gepufferte Ausgänge, ein Display, Betriebsartenwahlschalter und eine 3-stellige DMX-Kanal-Auswahl.
Das Netzteil ist weltweit verwendbar für Spannungen zwischen 90 und 240VAC. XLR-Steckverbindungenn können beliebig gemischt in 3p oder 5p verbaut werden.

Außerdem lieferbar RJ45-Steckverbinder im Uniflansch Gehäuse.

Viele Funktionen, die über einen Wahlschalter gewählt werden können, stehen zur Verfügung:
Herkömmlicher Splitter 1 in 8 mit Backup-Funktion (zuletzt empfangene Daten werden ausgegeben)
Herkömmlicher Splitter für 2 Linien zu je 4 Ausgängen mit Backup Merge 2 in 1 HTP: Der jeweils höchste Wert der beiden DMX-Linien wird verwendet;
Merge 2 in 1 LTP-A: Fällt Linie A aus, wird auf Linie B umgeschaltet
Merge 2 in 1 LTP-B: Fällt Linie B aus, wird auf Linie A umgeschaltet
Merge 2 in 1 Shift: Linie B wird an Linie A angehängt.

Der Kanal, bei dem die Zusammenführung beginnt, ist einstellbar Das Summensignal aller Merge-Funktionen steht an den Ausgängen 1-8 zur Verfügung
Split & Shift: Das Signal der Linie A wird an den Ausgängen 1-4 im Original ausgegeben, an 5-8 wird Linie A ab Kanal X beginnend mit 001 ausgegeben, wobei X einstellbar ist. Alle Kanäle vor X entfallen. Auf diese Weise lassen sich 2 Systeme auch dann mit einer DMX-Linie speisen, wenn eines der Systeme nicht anders als bei 001 beginnend konfigurierbar ist.

Die Artnet-Version des SMS 28 ist an einem Netzwerkstecker frontseitig zu erkennen.
Sie empfängt zwei DMX-Universen A und B und behandelt diese ebenso, als wären es DMX-Signale an den Eingängen A bzw. B.
Die DMX-Funktionalität bleibt voll erhalten, Artnet-Signale haben Vorrang vor DMX und schalten das Gerät automatisch auf Artnet-Betrieb. Ein Reset-Taster frontseitig setzt den Artnet-Prozessor auf Werkseinstellung mit einer bekannten IP-Adressen (IPV4).
Die jeweilige MAC-Adresse ist auf dem Gerät angegeben.

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=303&productgroup=27&productgroupmain=4

JB LIGHTING Licon FX

JB LIGHTING

Independent mixing console for 96 dimmer channels

Perfect handling due to 48 sliders that can be configured as both channel and scene faders.
The Licon FX is also a fader extension that can be coupled with the Licon 1X and Licon 1.

A total of 48 faders distributed over 4 banks of 12 sliders each are available, allowing the operator to access all Licon 1X dimmer banks simultaneously.
The Licon FX is designed in such a way that it can also be used as a stand-alone lighting control desk for 48 channels.

Properties
Fader extension for Licon 1 and Licon 1X, or light control desk for 48 channels;
Up to 48 preset faders in direct access, 16 of which can be assigned to chases;
Chase-Control section for fast direct access to chase parameters
MIDI capable
Graphic LCD display
Data backup to USB memory stick

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=155&productgroup=27&productgroupmain=4

JB LIGHTING Licon 1

JB LIGHTING

Up to 32 moving lights can be controlled with a maximum of 25 control channels and 7 fixed value channels.

Additionally you have access to 96 conventional DMX channels. The moving lights are controlled by direct selection of the individual spotlights and the corresponding parameters. The buttons are labelled to make it easy for even untrained users to keep track of the system.
Since sequences and chases can be created using presets, fast and effective programming is possible. In addition, the console has an effect generator that allows chases to be programmed using pre-programmed matrices, allowing effective sequences to be created in seconds.

At any time during a program sequence, individual fixtures or groups of fixtures and their parameters, as well as the run time, can be accessed. The console can be synchronized via MIDI and SMPTE or music from outside and it is possible to link several mixing consoles to multiply the number of control channels.
With the integrated CD-ROM drive, shows can be programmed to a standard or self-burned music CD, which then runs music-synchronously without additional peripheral devices such as time code clock. 4 AUX controllers are available for controlling additional DMX devices such as fog machines

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=154&productgroup=27&productgroupmain=4

H.E.S. USB DMX Super Duper Widget

HIGH END SYSTEMS

Packed in a slim 19-inch rack-mountable enclosure, the DMX Super Duper Widget offers 8 DMX 512 universes via XLR 5-pin connectors to expand Hog 4 OS consoles (except Road Hog 4, which only allows 4 universes) and Hog 4PC with an additional 8 DMX universes.

In conjunction with Nano Hog 4, Playback Wing 4 and Master Wing 4, users can configure additional powerful control solutions.

Hog 4 PC users can also unlock 8 DMX universes via Art-Net and E1.3.1 (sACN) by connecting a DMX Super Duper widget.

Technical data
USB connection with Hog 4, Full Boar 4, Road Hog 4, Hedge Hog 4 series and Hog 4PC;
Output of up to 4096 DMX channels
Comprehensive status message via LEDs
8 x XLR 5pin DMX, 1 x USB-B High quality aluminium panel with abrasion resistant printing;
19″ 1U unit for mounting in a rack
Kensington anti-theft protection
Compatible with Hog 4, Full Boar 4, Road Hog 4, Hog 4 PC, Wholehog 3, Road Hog Full Boar, Hog iPC and Hog 3 PC

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1558&productgroup=27&productgroupmain=4

H.E.S. Hog Playback Wing 4

HIGH END SYSTEMS

The Playback Wing 4 with its evolutionary styling is as much at home next to a console as it is as a controller of a Hog 4PC system.

This enables an attractive and reliable operation. A 15.6-inch widescreen dispaly with 10 finger multi-touch is integrated in the Master Wing 4.

Features
10 motorized playback masters
1 motorized Grand Master
USB connection to Hog 4, Full Boar 4, 4 and Road Hog Hog 4 PC
15.6-inch widescreen with Multi-Touch Super Widget
expansion slot socket for one Hog LED desklight, fully dimmable
1x desk lamp included in delivery
LED Desklight and Feedback LEDs dimmable
Status LEDs for Power, Data and Expansion
Two USB sockets
Fancy Road Hog 4 styling
Auto range mains connection (90-250VAC)
Dust protection included

Technical data
Main power: 100-250VAC, 50/60Hz, max 100W
Dimensions (WxDxH): 511.56x610.05x244.34mm
Weight: 12,51 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1557&productgroup=27&productgroupmain=4

H.E.S. Hog Master Wing 4

HIGH END SYSTEMS

The Master Wing 4 with its evolutionary styling is just as much at home next to a console as it is as a controller of a Hog 4PC system.

It uses the same high quality controls that are applied to the Hog 4 consoles.
This enables an attractive and reliable operation. A 15.6-inch widescreen dispaly with 10 finger multi-touch is integrated in the Master Wing 4.

Features
30 faderless Playback Master
USB connection to Hog 4, Full Boar 4, 4 and Road Hog Hog 4 PC
15.6-inch widescreen with multi-touch
Super Widget Expansion Slot
Base for one Hog LED desklight, fully dimmable
1x desk lamp included
LED Desklight and Feedback LEDs dimmable
Status LEDs for Power, Data and Expansion
Two USB sockets
Fancy Road Hog 4 styling
Auto range mains connection (90-250VAC)
dust protection included

Technical data
Main power: 100-250VAC, 50/60Hz, max 100W
Dimensions (WxDxH): 511.56x610.05x244.34mm
Weight: 12,33 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1556&productgroup=27&productgroupmain=4

H.E.S. Hog 4 Lighting Control System

HIGH END SYSTEMS

The Hog 4 is the flagship and heart of the new Hog 4 series.

Equipped with the latest technology, it is the successor to the award-winning Wholehog III.
Besides the 17" widescreen multi-touch screens, the motorized faders with separate grandmaster, the small touch screen in the control panel and the LCD keys are the special highlight of the console.

Three monitor outputs, eight built-in DMX outputs, MIDI in- and outputs, eight USB ports and 2 robust Neutrik Ethercon Fast Ethernet ports allow highest flexibility. So you are prepared for all cases, from the smallest industrial event with a single console to the biggest stadium show, theme park installations or Broadway shows.

Features
Newly developed Hog 4 operating software
Unlimited number of simultaneous crossfades
Two internal 17" widescreen touch screens with 10-point multi-touch
Three external monitors or touchscreens are supported
Five encoders for an extended wheel set
Twelve LCD user keys
Three-axis, backlit trackball with encoder for the third axis and four configurable buttons for cursor and position control;
10 motorized playback faders
A motorized Grand Master
Dedicated Intensity and Rate wheels
User assignable Jog Shuttle Encoder
48 soft keys for quick selection on the toolbar
Built-in DMX processor 8000
Hog-Net Ethernet Connection
Fixture-Net Ethernet connection
Integrated Keyboard
Internal hard disk
Internal CD/DVD drive
8 USB ports for Wholehog Wings and external touchscreens
Storage space under the armrest
Desk lights, feedback LEDs and integrated working light are dimmable
Auto-ranging power input (90-250VAC)
Light Converse Visualizer Dongle included
Dust cover included in the scope of delivery
Road Case included

Connectivity
Unlimited number of DMX channels via Ethernet DPs
Unlimited number of Art-Net and E1.3.1 (sACN) universes via Ethernet DPs Onboard MIDI input and output, MIDI show control and MIDI time code and LTC input
Multiple LTC inputs via optional multiple SMPTE / LTC USB Widget
Connectivity with multiple Visualizers via Ethernet possible
Wired and wireless network capability with multiple Wholehog console systems;
Remote Focus capabilities if you are networked to a Tablet PC running Hog 4PC software
Supports USB Playback and Expansion Wings

Dimensions and weight
With the screen facing down: W 102.87 cm, D 72.37 cm and H 16.48 cm
With the screen facing up: H 41.74 cm
Weight: 34 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1555&productgroup=27&productgroupmain=4

H.E.S. DMX Processor DP8000

HIGH END SYSTEMS

The DMX Processor 8000 extends the Hog product line with exceptional DMX processing capabilities.

Without compromising the high standards of Flying Pig Systems, durability, quality and innovation set new standards.

Properties
The DP8K provides the output power for Hog systems
16 DMX universes
Powerful processing of cross fades and effects
Local interface with LCD display and buttons for configuration DMX status and test equipment;
All functions can be configured remotely Firmware remotely upgradeable via network

Specifications
2.0 GHz Intel Dual Core processor with 1 GByte RAM and 1 GByte Flash Gigabit;
Ethernet Dual Ether-Con connections (Hog-Net and Art-Net)
White LED backlit graphic LCD display for graphical user interface
Extensive LED status feedback
Connectors: 8 x 5pin XLR, 1 x EtherCon for Hog-Net, 1 x EtherCon for Art-Net, 2 x USB-A;
Input voltage: 90-250 VAC
Lock IEC connection
Kensington Security Slot
Compatible with Hog 4, Full Boar 4, Road Hog 4, Hedgehog 4N/X, Hog 4PC, Wholehog 3, Road Hog Full Boar, Hog iPC and Hog 3PC

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1631&productgroup=27&productgroupmain=4

H.E.S Road Hog 4

HIGH END SYSTEMS

Road Hog 4 lighting console for automated luminaires, dimmer and multimedia controllers

Features
Stable Hog 4 software
A 22" widescreen multi-touch screen, for a large overview
Further external monitors or touch screens can be connected
Four encoders for parameter setting
Twelve assignable keys
Ten non-motorized faders
Four integrated DMX outputs (8 outputs possible via DMX and Art-Net)
Via DP 8000 DMX processor further DMX and Art-Net outputs possible;
Hog-Net Adapter
Fixture-Net Adapter
Solid State Hard Disk
Integrated CD/DVD drive
SMPTE/Midi via optional USB MIDI/LTC widgets
Five USB ports e.g. for wings and widgets
Roadcase optionally available
Road Hog 4 software data compatibility with all widgets and wings of the Wholehog III series;
Special User Kinds
Console Lock Function
Merged Library
OSC compatibility
Fast booting of the console
Hog 3 shows can be loaded into a Hog 4 console
Hog 4 shows are convertible to Hog 3 software 3.2.6, compatibility is given;
Installation from USB stick possible
Up to eight LTC/Midi widgets possible
Parameter Wheelsets easier and more freely configurable
All window contents can be printed as PDF and transferred to a computer via USB stick;
All four consoles are networkable and expandable with wings and widgets.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=348&productgroup=27&productgroupmain=4 Translated with www.DeepL.com/Translator (free version)

ELC dmXLAN switch8LX

ELC

The dmXLAN switch8LX was specially developed for live entertainment applications where a mixture of data protocols would overload and saturate commercially available network switches.
The ELC switches form the backbone of the network distribution system. Set up fast redundant loops with error reporting.
8 Cat5 ports with speeds up to 100 Mbps, ports 1 & 2 with optional dual mode ports ﬁberoptic.

Properties
8x 10/100Mbps network connections
Supported by the software dmXLAN V4
Art-Net and MA-Net filtering dmxLAN

Software download from ELC Lighting:
https://www.elclighting.com/products/dmxlan-v4/

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1635&productgroup=27&productgroupmain=4

ELC dmXLAN node8GB Fi

ELC

The ELC dmXLAN node8GB is another variant of the largest DMX/Ethernet node series.

It offers 8 bidirectional 5pin XLR female connectors which can be used as DMX outputs, DMX inputs or DMX outputs with RDM.
The Ethernet connection is established via 2x 10/100/1000 mBit connectors (Ethercon), which can be used simultaneously as they are connected via an internal switch.
The ELC dmXLAN node8GB is fully compatible with the free dmXLAN software. This enables e.g. merging into LTP, HTP or Priority as well as a soft patch.
Device parameters can be controlled remotely 02x network10/ 100/1000Artnet 08x DMX Out or DMX In dmxLAN

Software download from ELC Lighting:
https://www.elclighting.com/products/dmxlan-v4/

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1634&productgroup=27&productgroupmain=4

DMX Splitter 4 MKII 19"

STAIRVILLE

1 x DMX 3 and 5 pin in
4 x DMX 3 and 5 pol out

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=187&productgroup=27&productgroupmain=4

DMX Splitter 4 for truss mounting

STAIRVILLE

Properties and scope
1 x DMX 3 and 5 pin in/ out
4 x DMX 3 and 5 pol out
incl. Schuko Powercon mains cable
incl. single clamp 30mm/ 200kg M10, black
incl. Safety

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=186&productgroup=27&productgroupmain=4

BOTEX DMX Recorder DR-512

BOTEX

With the DR-512, DMX data can be recorded and connected in a simple way. At the push of a button, up to 4 sequences can be recalled.
For your large projects and for data storage, the non-volatile 1MB memory can be expanded with an optional 32MB CF memory card (code 11271).

Properties
Professional DMX recorder has access to memory and CF card
4 sequences (l04-l04) + startup + shutdown available on the Memorycard
33 sequences (E01-E33) available on the CF Card
PLAY, PAUSE and STOP functions
Manual / Autostart / DMX monitor / DMX trigger / Program / Setup mode
24 / 25 / 30 frames SMPTE signal available
Exclusive 32 MB CF Card
Remote controllable PLAY, STOP and RECORD function
2 x 16 digit display

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=185&productgroup=27&productgroupmain=4

VMB Forklift TL A320

VMB

The TL-A320 is the large Line Array Lift of the VMB TL-A series.
Due to the patented ALS (autolock security system) a high degree of security is guaranteed.

Technical data
Max. height: 6 m
Max. load capacity: 320 kg
Working area: 2.25 x 2.15 m
Height: 1.98 m
Weight: 184 kg
Cable winch: 1200 kg
Fork cross section: 50x50 mm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=263&productgroup=26&productgroupmain=3

MANFROTTO Windup 087

MANFROTTO

Lamp tripod consisting of 3 sections with 2 pull-out sections

Technical data
Crank centre column, both drawers are extended simultaneously
Max. height: 3.70 m
Footprint Diameter of the stand base 1.28 m
Min. height: 1.67 m
Transport height 1.81 m
Max. load: 30 kg
Max. load at 6º inclination: 30 kg
Recording possibility: Mini or normal TV cone
Material: galvanized steel
Own weight: 21.4 kg
Colour: black or silver

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=143&productgroup=26&productgroupmain=3

MANFROTTO Autopole (432-3,7B)

MANFROTTO

Technical data
Weight: 2.2 kg
Clamping range: 2.1 m - 3.7 m
Colour: Black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=318&productgroup=26&productgroupmain=3

MANFROTTO Autopole (432-2,7B)

MANFROTTO

Technical data
Clamping range: 2.1 to 2.7 m
Weight: 2,20 kg
Colour: Black

GENIE ST 25 Super Tower

GENIE INDUSTRIES

Technical data
Working height: 7.95 m
Payload: 295 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=142&productgroup=26&productgroupmain=3

GENIE SLC 24

GENIE INDUSTRIES

Technical data SLC24
Height (folded): 218 cm
Width: 80 cm
Width - boom folded down: 168 cm
Length - legs folded up: 70 cm
Length - in working position: 193 cm
Ground clearance: 5.8 cm
Own weight: 170 kg
Working height forks bottom: 678 cm
Working height forks top: 732 cm
Payload: 300 kg with a load centre fork inner side up to 36cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=140&productgroup=26&productgroupmain=3

GENIE SLC 18

GENIE INDUSTRIES

The Genie Superlift Contractor (SLC) is a stable, yet lightweight and portable hoist.

Technical data SLC18
Height (folded): 218 cm
Width: 80 cm
Width - boom folded down: 168 cm
Length - legs folded up: 70 cm
Length - in working position: 173 cm
Ground clearance: 5.8 cm
Own weight: 139 kg
Working height forks bottom: 511 cm
Working height forks above: 564 cm
Payload: 300 kg with a load centre fork inner side up to 36 cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=139&productgroup=26&productgroupmain=3

GENIE SL 25

GENIE INDUSTRIES

Technical data SL 25
Working height: 794 cm
Payload: 295kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=141&productgroup=26&productgroupmain=3

ALP Passenger lift PHC 940

ALP

Model PHC 940 EU1

Technical data
Working height: approx. 9.45 m
Platform height: approx. 7.45 m
Payload: max. 140 kg
Own weight: approx. 309 kg
Overall height: 1.98 m
Transport dimensions: 1.98 x 0.77 x 1.32 m (H/W/L)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=472&productgroup=26&productgroupmain=3

ALP Lift LMC 620, Double-crank winch

ALP

Technical data
Lifting height, top load fork 6,190 mm
Lifting height, load fork below: 5.800 mm
Load capacity: 250 kg
Length load fork: 650 mm
Chassis length: 1,725 mm
Chassis width: 760 mm
Width of chassis incl. outrigger: 1,420 mm
Mast height: 1.600 mm
Transport length: 780 mm
Transport width: 760 mm
Dead weight (without jib): 153 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=396&productgroup=26&productgroupmain=3

ALP Lift LMC 600, double crank winch

ALP

ALP Lift LMC 600 with double crank winch

Technical data
Load capacity: max. 250kg
Lifting height: fork bottom 5,90m, fork top 6,29m
Own weight: 139 kg
Transport height: 1.89 m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=293&productgroup=26&productgroupmain=3

8 channel motor controller

ULTRALITE

Specifications

Power supply line: CEE32A / 400V
for 3-phase AC motors up to 1.0 KW
Rotary field detection left/right field with lights red / green
Visual indication of the 3 phases of the mains supply
Motor protection switch with rotary switch per channel
Trigger current adjustable
Electrically interlocked reversing contactors
Separate contactors for "emergency stop" and "drive"
Tamperproof emergency stop buttons
Device output via 16pin standard multi-pin plug
Changeover switch for individual direction of rotation adjustment per motor on the rear of the device;

Integrated protection circuits: (immediate shutdown) - failure of a mains phase - tripping of any motor protection switch - actuation of the emergency stop buttons

Link operation: coupling of up to 4 motor controls via LINK cable possible - important functions such as emergency stop or start button are then shared;

Manual control in standard industrial housing - yellow signal colour - integrated emergency stop button - suspension device as standard - motor preselection switch with 3 switch positions UP / 0 / DOWN - start button and display "ready for operation" (OK) - 15 m cable with robust multi-pin plug, lockable

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=126&productgroup=24&productgroupmain=3

1 channel motor controller direct

ULTRALITE

Control for 1 motor for setup operation

Technical data
Travel direction switch
Emergency stop
Current limitation
Input 16A CEE / 400V
Output 1x 16A CEE / 4 pol

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=128&productgroup=24&productgroupmain=3

4 channel motor conroller

ULTRALITE

Technical Data
Feed-in 16A/ 400V
Output 01 x Harting 16 pol
incl. manual control unit and end plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=125&productgroup=24&productgroupmain=3

LLT 4 channel motor controller

LLT

Motor controller for 4 motors

Technical data
Power supply 32A/ 400V
01x Harting 16 pol output
Rotary field display
Master-Slave connection
Emergency shutdown
Auto detection of the phase position and switchover
incl. 2x end plugs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=395&productgroup=24&productgroupmain=3

LLT 8 channel motor controller

LLT

Motor controller for 8 motors

Technical data
Power supply 32A/ 400V
02x Harting 16 pol output
Rotary field display
Master-Slave connection
Emergency shutdown
Auto detection of the phase position and switchover
incl. 2x end plugs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=129&productgroup=24&productgroupmain=3

LLT 32 channel motor controller

LLT

LLT 32-channel motor controller in case for 32 motors up to 1.5 kW consisting of:

4x LLT 8 channel motor controller ( up to 6,3A contactor ) 50/ 60 Hz
1x STV 125A IN -> 4x32A
1x 32 channel control panel
1x manual control with Go/Not Off
1x desk lamp
2x end plug 6pol
1x end plug 5pin manual control

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=130&productgroup=24&productgroupmain=3

LITEC 2 channel direct motor controller

LITEC

Control for 2 motors for setup operation

Technical data
Travel direction switch
Emergency stop
Current limitation 2CH x 5A
Input 16A CEE / 400V
Output 2x 16A CEE / 4 pol

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=127&productgroup=24&productgroupmain=3

TRALIFT Manual chain hoist 1.0to - 08m

TRALIFT

Technical data
Load capacity: 1000 kg
Lifting height: 8 m
Hand chain: 14 m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=124&productgroup=23&productgroupmain=3

TRALIFT Manual chain hoist 0,5to - 10,0 m

TRALIFT

Technical data
Load capacity: 500 kg
Lifting height: 10m
Hand chain: 18 m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=123&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 500kg 36m

MOVECAT

MOVECAT PLUSlite 500

Technical data
Load capacity: 500 kg
Chain: single strand chain chain hoist to D8 Plus /igvw SQ P2 400 V, 3Ph, 50Hz, direct control;
Chain length: 36m stroke
Lifting speed: 4m/min.
Chain box: KS 724 incl. chain (K7022 according to EN 818-7 DAT) galvanized (silver);
Dimensions: 440 x 343 x 234 mm ( Lx W x H)
Use in overhead and standard mounting position without conversion;
Patented slipping clutch as overload protection
Permanent force and form closure in the load line
Braking system: two independent DC brakes with current switch;
1 Basicplate
2 handles
1 chain load hook
1 single hole suspension eyelet
1m connection cable with CEE 16/4 plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=736&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 500kg 50m

MOVECAT

MOVECAT PLUSlite 500

Technical data
Load capacity: 500 kg
Chain: single strand chain chain hoist to D8 Plus /igvw SQ P2 400 V, 3Ph, 50Hz, direct control;
Chain length: 50m stroke
Lifting speed: 4m/min.
Chain box KS 724 incl. chain (K7022 according to EN 818-7 DAT) galvanized (silver)
Dimensions: 440 x 343 x 234 mm ( Lx W x H)
Use in overhead and standard mounting position without conversion
Patented slipping clutch as overload protection
Permanent force and form closure in the load line
Braking system: 2 independent DC brakes with current switch
1 Basicplate
2 handles
1 chain load hook
1 single hole suspension eyelet
1m connection cable with CEE 16/4 plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=737&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 500kg 24m

MOVECAT

Electric chain hoist, D8 plus, SWL 500 kg 4 m/min

Technical data
Load capacity: 500 kg
Lifting speed: 4 m/min
Chain length: 24 m
Load trains: 1
Motor power: 0,75 kw
Load chain: 7 x 22 mm
Independent brakes: 2

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=121&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 320kg 24m

MOVECAT

MOVECAT PLUS-C 320-4HE-21 (DC)

Chain hoist to D8 Plus igvw /DIN 56950-11:05-2012 with safety factor dyn.8:1 (chain), only single-fall operation possible.

Load capacity: 320 kg (single strand chain)
Lifting speed: 4m/min
Lifting height: 24m
Operating voltage: 380-415 V/3 Ph /50 Hz
Control: direct control 380-415 V AC
Motor power: 0,18 KW
Duty cycle: 40%
Suspension chain: chain load hook, black
Motor suspension: single-hole suspension eyelet
Operating mode: Use in overhead and standard mounting position
Braking system: 2 independent DC brakes with brake booster protection
Overload protection: patented slip clutch, positive connection between load and brakes;
Chain type: 24.4m K5215 (EN 818-7 DAT)
Chain box: KS 5225
Equipment: 2 handles ( overhead operation )
Connection cable: 1m H07RN-F with CEE 16/4 cable plug black, cable entry with strain relief and 360° bend protection
Weight : 34,5 KG (76 lbs) with 24,4m chain
Dimensions: 460x240x265mm (LxWxH) without chain box and connection cable

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=356&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 250kg 18m

MOVECAT

Electric chain hoist, D8 plus, SWL 250kg 4m/min

Technical data: Load capacity 250kg
Lifting speed: 4m/min
Chain length: 18m
Load trains: 1
Engine power: 0,37kw
Load chain: 5,2 x 15mm
Independent brakes: 2
Protection class: IP 54
Dimensions: 45,5 x 24 x 17cm

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=120&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 2500kg 2 rope 36m

MOVECAT

Electric chain hoist, D8 Plus SWL 2500kg

Load capacity: 2500 kg
Lifting speed: at 50 Hz approx. 4 m/min
Lifting height: 36m
Number of load trains: 2
Motor power: 3.0 kW, 6.15A, cos phi 0.85
Weight: 298kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1430&productgroup=23&productgroupmain=3

EUROTRUSS FD33 black

EUROTRUSS

EUROTRUSS FD33 black
Manufacturer: Eurotruss

Eurotruss three-point truss - Colour: black

side length 290mm
Truss height 258mm
Pipe diameter 50mm
Pipe diameter diagonal 20mm
Wall thickness 2mm
Weight approx 5,5 kg/m

different lengths available:

Art.no. Description
25569 Eurotruss FD33 0,21m black
20846 Eurotruss FD33 0,25m black
18529 Eurotruss FD33 0,29m black
18530 Eurotruss FD33 0,50m black
18526 Eurotruss FD33 1,00m black
20847 Eurotruss FD33 1,50m black
18527 Eurotruss FD33 2,00m black
18528 Eurotruss FD33 3,00m black
26278 Eurotruss FD33 Corner 120º 50/50 black, tip point top
20242 Eurotruss FD33 corner 90º 50/ 50 black, tip point top
20243 Eurotruss FD33 T-piece 50/50 black, tip point top
21246 Eurotruss FD33 X-piece 50/50 black, tip point top

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=250&productgroup=33&productgroupmain=2

LITEC FX30S silver

LITEC

LITEC FX30S silver
Manufacturer: Litec

Litec two-point truss >br>
side length 291mm
Pipe diameter 50mm
Pipe diameter diagonal 18mm
Wall thickness 2mm

different lengths available:
Art.no. Description
1006 Litec FX30 050 0,5m
11675 Litec FX30K2 Bone
1011 Litec FX30K4 Dado
1007 Litec FX30S100 1,0m
17194 Litec FX30S150 1,5m
1008 Litec FX30S200 2,0m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=100&productgroup=32&productgroupmain=2

EUROTRUSS JT20 Silver

EUROTRUSS

A new specific carbon black conductor has been added to the Eurotruss product range.

The JT20 is designed for low heights such as studios and exhibition stands. The truss consists of a 50x3mm main tube built with the standard conical connector and with a height of only 195mm it is the perfect truss for vertical loads in low height areas.

Corner Blocks allows you to build matrix frames and the horizontal pin position ensures quick and easy assembly.

Manufactured with the quick connection system and approved according to DIN EN 1999-1-1 & 1999-1-1/A2 (Eurocode 9).

Low overall height
Massive strong main pipe & standard CS1-CON
Horizontal pin position, which facilitates and secures the installation
Universal corner block system that allows you to go in all directions.
Only 195mm high! TECHNICAL DATA
Height 195 mm / 7.7 in
width 50 mm / 1.9 in
Main pipe 50 x 3 mm / 1.9 x 0.12 in
Braces 50 x 3 mm / 1.9 x 0.12 in
Weight ~3kg/m / ~2.0 lbs/ft
Pin Position Horizontal
Material EN AW-6082 T6
Connection CS1-CON

Available in different lengths:
Art.No. Description
31110 Eurotruss JT20 0,25m silver
31111 Eurotruss JT20 0,50m silver
31112 Eurotruss JT20 1,00m silver
31113 Eurotruss JT20 2,00m silver
31114 Eurotruss JT20 3,00m silver

Also available in black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1467&productgroup=32&productgroupmain=2

EUROTRUSS HD22 black

EUROTRUSS

EUROTRUSS HD22 black

Eurotruss HD22 black
height: 200 mm / 7.87 in
width: 50 mm / 1.97 in
Tube: 48.4 x 4.47 mm / 1.91 x 0.18 in
Braces: 20 x 2 mm / 0.79 x 0.08 in
Weight ~4.3 kg/m / ~2.9 lbs/ft
Bolt position: Horizontal
Material of crossbeam: EN AW-6082 T6
Connector type traverse: CS1 - CON
different lengths and corner connectors 1-4 way available:
Art.no. Description
29028 EUROTRUSS HD22 0,50m, black
29027 EUROTRUSS HD22 1,00m, black
29025 EUROTRUSS HD22 2,00m, black
29023 EUROTRUSS HD22 3,00m, black
29021 EUROTRUSS HD22 Corner 1-4 directions, black

EUROTRUSS HD22 black

Eurotruss HD22 black
height: 200 mm / 7.87 in
width: 50 mm / 1.97 in
Tube: 48.4 x 4.47 mm / 1.91 x 0.18 in
Braces: 20 x 2 mm / 0.79 x 0.08 in
Weight ~4.3 kg/m / ~2.9 lbs/ft
Bolt position: Horizontal
Material of crossbeam: EN AW-6082 T6
Connector type traverse: CS1 - CON
different lengths and corner connectors 1-4 way:
Art.no. Description
29028 EUROTRUSS HD22 0,50m, black
29027 EUROTRUSS HD22 1,00m, black
29025 EUROTRUSS HD22 2,00m, black
29023 EUROTRUSS HD22 3,00m, black
29021 EUROTRUSS HD22 Corner 1-4 directions, black

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=924&productgroup=32&productgroupmain=2

EUROTRUSS HD31 Boxcorner BLK 31 black

EUROTRUSS

The BLK-31 corner block enables the creation of 2,3,4,5 and 6-way corners with FD/HD31 single tube. Attachments such as BLK-SCON-ST (Steel 1/2 connector) or BOB (Bold-On Receiver) are bolted to the corner block. In this way, all configurations of 90 degree angles are possible. This makes it a perfect, easy-to-use, creative and cost efficient product.

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube black 1,00m

EUROTRUSS

EUROTRUSS HD31 single tube truss

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube Black 2,00m

EUROTRUSS

Eurotruss Eurotruss single tube truss black

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube black 3,00m

EUROTRUSS

EUROTRUSS HD31 single tube black

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

EUROTRUSS HD31 single tube black 0,75m

EUROTRUSS

EUROTRUSS HD31 single tube truss

(single pipe / pipe with spigot connector) black
Pipe diameter 50 mm
Wall thickness: 3 mm
Material Aluminium
Accessories: Eurotruss FD/HD Connectors

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=358&productgroup=31&productgroupmain=2

MOVECAT Motor D8+ 160kg 18m

MOVECAT

electric chain hoist, D8 plus, SWL 160kg 4m/min 18m chain

Technical data
Load capacity: 160kg
Lifting speed: 4m/min
Chain length: 18m
Load trains: 1
Independent brakes: 2
Connection:1m 16A CEE / 400V connection cable
Protection class: IP 54
Dimensions: 38 x 19,6 x 18,6cm
Weight: 21kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=469&productgroup=23&productgroupmain=3

MOVECAT Motor D8+ 1000kg 24m P

MOVECAT

PROstage+
Electric chain hoist, D8 Plus SWL 1000kg 4m/min

Technical data
Load capacity: 1000 kg
Lifting speed: at 50 Hz approx. 4 m/min
Number of load trains: 1
Motor power: 1.1 kW
Noise level: < 60 dB/A / 1 m
Duty cycle/switches per hour: 40% / 240
Weight at 24 m stroke: 68.7 kg
Dimensions (LxWxH) mm 416 x 300 x 235
Lifting height: 24 m
Direct control 380 - 415 V AC
Maintenance-free DC brake (2)
Integrated operating hours counter
Overload protection through pat. safety slip clutch
High-strength D-Type special chain, black or silver
Specially hardened gear unit
Precisely milled and specially hardened chain pocket wheel with 5 pockets
Easyplate chain guide
Single hole suspension eye
Chain hook, rotatable
Permanently mounted, foldable textile chain storage (flame resistant, DIN 4102 B1)
High-strength light metal housing with two carrying handles
Black, low-reflection paint RAL 9005
Compact, lightweight construction
Very smooth, low-noise operation
Can be used in climbing and standard position without modification
1 m highly flexible Titanex HO7RN-F connection cable with CEE 16 A 4-pin plug (black) - DC version / Direct-Control

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1439&productgroup=23&productgroupmain=3

MOVECAT Motor D8 1000kg 36m

MOVECAT

MOVECAT ECOlite 1000

Technical data
Load capacity: 1000 Kg
Chain: 36m
stroke speed: 4m/min.
single strand chain silver coloured, chain hoist according to BGV D8, 400 V , 3 Ph, 50 Hz, direct control
incl. chain (K7022 high strength according to EN 818-7 DAT)
Use in overhead and standard mounting position without modification
patented slip clutch as overload protection
DC brake with current switch
2 handles
1 chain load hook
1 single hole suspension eyelet
Textile chain storage KS 724 for 36m chain
Basicplate chain inlet
connecting cable 1m with CEE 16/4 plug

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=735&productgroup=23&productgroupmain=3

MOVECAT Motor D8 1000kg 24m

MOVECAT

Eco Lite 1000/4
Electric chain hoist, BGV D8
SWL 1000kg
Speed 4m/min

features
Direct control 400 V AC or remote control 24 V DC
Direct current brake (1)
Overload protection through pat. slip clutch
High quality, specially hardened gears
Precisely milled and specially hardened chain pocket wheel with at least 5 pocketsHigh strength round steel chain according to DIN 5684
Basicplate chain guide
Single hole eye alternatively motor hook
Chain hook, rotatable
Fixed mounted, foldable textile chain storage
Robust cast light metal housing (ECOlite with plastic caps) closed on all sides with two handles;
Black, low-reflection paint RAL 9005
Compact, lightweight construction
Smooth, low-noise operation
Can be used in climbing and standard position without modification
1 m HO7RN-F connection cable with CEE 16 A 4-pin plug (black)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=119&productgroup=23&productgroupmain=3 Translated with www.DeepL.com/Translator (free version)

CHAINMASTER Motor D8+ 250kg 18m

CHAINMASTER

Features
Load capacity 250kg
Climbing or stationary train
Overload protection through patented slipping clutch
small design with a small weight
Exact chain guide
textile chain storage
Speed: 4m/min

Technical data
Colour: Black
Load capacity: 250kg
Strands: 1 strand
Speed: 4m/min
Chain: 18m / 5.2x15mm
Dimensions: 453x236x118mm
Motor power in kW: 0.37
Connection cable: 1m CEE 16 Ampere, 4pol
Safety brake: 2x
Weight with chain: 36kg
Weight without chain: 27kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=117&productgroup=23&productgroupmain=3 Translated with www.DeepL.com/Translator (free version)

CHAINMASTER Motor D8+ 500kg 24m

CHAINMASTER

Chainmaster electric chain hoist, D8 plus
SWL 500kg
Speed: 4m/min

Technical data
Load capacity: 500kg
Lifting speed: 4m/min
Chain length: 24m
Load trains: 1
Motor power: 0,75kw
Load chain: 7 x 22mm
Independent brakes: 2

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=313&productgroup=23&productgroupmain=3 Translated with www.DeepL.com/Translator (free version)

CHAINMASTER Motor D8+ 160kg 18m

CHAINMASTER

Chainmaster Rigging Lift BGV D8+, max. 160kg

Performance
Upgrade D8+ (2nd brake, 50% load relief)
2 handles
Rotating hook
18m chain 4x12mm
Chain box 4/20
1 strand 4m/min
Cable 1m
Plug CEE16/4

RIMA Fluter A 150 CDM 4200K black

RIMA LDR

RIMA A 150W CDM asymmetrical floodlight

The stylish fair spotlight puts your exhibits in the right light! The asymmetrical floodlight with a CDM 150W bulb (discharge lamp) is generally equipped with a barndoor and colour filter frame. The electronic ballast is attached to the side of the bracket to be protected from overheating.

features:
150W CDM discharge lamp
4200°K
Colour: black
with colour filter frame
with barndoor
Weight 3,6 kg without hook
Dimensions: depth 105mm x width 340mm x height (without bracket) 205mm

Optional: in 5200°K

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=87&productgroup=8&productgroupmain=1

CHAINMASTER Motor D8 250kg

CHAINMASTER

Features
Working load 250kg
Climbing or stationary block
Overload protection through patented slipping clutch
Light and small design
Exact chain guide
Textile chain buffer
Speed: 4m/min
in the professional double case

Technical data
Colour: Black
Load capacity: 250 kg
Strands: 1 strand
Speed: 4m/min
Chain: 24m / 4x12mm
Dimensions: 317x189x114mm
Motor power in kW: 0.18
Connection cable: 1m CEE 16 Ampere 4pol
Safety brake: 1x
Weight with chain: 22.2 kg
Weight without chain: 15kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=115&productgroup=23&productgroupmain=3

CHAINMASTER Motor D8 1000kg 24m

CHAINMASTER

Features
Climbing or stationary block
Overload protection through patented slipping clutch
Light and small design
Exact chain guide
Textile chain buffer
Speed: 4m/min
1000kg in a professional single case

Technical data
Colour: Black
Load capacity: 1000 kg
Strands: 1 strand
Speed: 4m/min
Chain: 24m / 7x22mm
Dimensions: 371x257x155mm
Motor power in kW: 0.75
Connection cable: 1m CEE 16 Ampere, 4pol
Safety brake: 1x
Weight with chain: 51kg
Weight without chain: 27kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=116&productgroup=23&productgroupmain=3

MIG HIT 400W sym. Fluter 5200K

MIG

Features:
400W bulb E-40
symmetrical Reflector made of pure aluminium
HIT housing die-cast aluminium with cooling fins
black
IP 65
Weight: 11,0 kg
Dimensions WDH: 44 x 15,5 x 47,5cm

optional bulbs in the colours:
White 4200K
Blue
Green
Orange
Magenta

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=94&productgroup=8&productgroupmain=1

MIG HIT 400W asym. Fluter 5200K

MIG

Features:
400W bulb E-40
asymmetrical reflector made of pure aluminium
HIT housing die-cast aluminium with cooling fins
black
IP 65
Weight: 11,0 kg
Dimensions WDH: 44 x 15,5 x 47,5cm

optional bulbs in the colours:
White 4200K
Blue
Green
Orange
Magenta

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=94&productgroup=8&productgroupmain=1

LITECRAFT Studio Par MSR 575M black

LITECRAFT

The Studio PAR MSR 575M from LITECRAFT combines the classic design of the Studio PAR spotlight with the advantages of the particularly powerful and efficient MSR 575 lamp. The compact and extremely robust spotlight housing is made of die-cast aluminium. The ballast and the igniter are located externally in a housing that is screwed to the spotlight. Maximum light output is guaranteed by either the MSR 575 or the MSD 575 lamp with its particularly long service life, in conjunction with a highly refined reflector. The MSR illuminant reaches up to 1,000 and the MSD illuminant even up to 3,000 operating hours. The Studio PAR MSR 575M can be adapted to the respective lighting situation with extensive accessories such as colour filter frames and door panels.

Features
MSR 575-2/MSD 575
4 different lenses VNSP (6° x 6°), NSP (7° x 7°) MFL (9° x 19°), WFL (17° x 40°)
Bulb CSR 575/2, 7.200°K
socket GX 9,5
Optics PAR (Parabolic Aluminized Reflector)
Barndoor

Technical data
Mains voltage 230 V 50 Hz
Current consumption 2.6 A at 230 V
Ballast magnetic, internal
Housing
Material aluminium die-casting
Colour black

Dimensions/Weight
Dimensions (L x W x H) 25.0 x 25.0 x 50.0 cm
Weight 12,3 kg
Colour filter frame 19,5 x 19,5 cm
Barndoor 19,5 x 19,5 cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=91&productgroup=8&productgroupmain=1

Source 4 Par GKV 600w black

Eurolite

Spotlight with 4 interchangeable lenses (VNSP, NSP, MFL and WFL)
Light output of a conventional PAR 64 spotlight with lower power consumption
High-quality die-cast housing for highest stability
with colour filter frame
with metal reflector
with barndoor
bright GKV 240V/600W bulb
Ideal for theatres, large stages and mobile use

In flight case incl. barndoor, colour frame, Manfrotto uni clamps

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=77&productgroup=7&productgroupmain=1

SHOWTEC Sunstrip Active DMX Strip Blinder MKII

SHOWTEC

Showtec Sunstrip Active DMX MKII, is the successor of the very popular Showtec Sunstrip Active.

The Sunstrip is powerful and has a built-in dimmer pack. So that the device is particularly flexible for many applications,
you can select different DMX modes: 1 channel, 2 channels, 5 channels and 10 channels.

For stand-alone use, the Sunstrip-Active is equipped with 16 built-in patterns. as well as with a manual dimmer.

With the Neutrik Powercon inputs and outputs, the Sunstrip is ideal on-the-road even for demanding users.

For easy installation, the Sunstrip-Active is equipped with two wall/floor mountings as well as several M10 nuts to move the clamp into any desired position.

Specifications:
Built-in programs
Powercon In- and Output
DMX 3pol in/out
Including assembly/floor mounting
Lamps included

Current voltage: 240V 50Hz,
Power consumption: 550W
Control mode: DMX (selectable: 1, 2, 5 or 10 channels)
Current: 3.5A, fuse: F6.3A,
Lamp: 10x Showtec 240V/50W, GU10 (254026)
Weight: 5,32 kg
Dimensions: 1000 x 130 x 77mm,

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=82&productgroup=7&productgroupmain=1

VARYTEC LED PAR Typhoon 12 IP65

VARYTEC

Outdoor LED Flat Par
with large colour spectrum
ideal for temporary architecture or outdoor decorative lighting
black aluminium housing
UV effects and deep blue due to ultraviolet LEDs
four different dimmer curves
Color display with four buttons on the back side
Fanless through convection cooling incl. power adapter cable to Power Twist True1 IP65

Technical data
Light source: 12 pieces 10 W RGBWA UV LEDs in the colours red, green, blue, neutral white, amber and ultraviolet;
Modulation: 32 khz
Beam angle: 15°
Operating modes: DMX (3, 6, 8, 10 or 13 channels)
Sound-to-Light, Automatic, Master-Slave
Static colors selectable on the device
Power in/out: Power Twist True1 IP65 (suitable connection cable not included)
XLR in/out IP65 5 pin (female)
Housing protection class: IP65
Power supply: voltage 110 ~ 250 V / 50 ~ 60 Hz
Power consumption: max. 120 W
Dimensions (L x W x H): 288 x 280 x 142 mm
Weight: 4,00 kg

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=440&productgroup=6&productgroupmain=1

SGM TLD 612A IP65

SGM

For the operation of LED-Balls LB 100 and Tubes LT 100 or LT 200 a TLD-612A Touring Pixel Driver is required, which can drive up to 2m long LT100 or LT200 Tubes (54 pixels) or max. 6.8m long LED-Ball chains LB100 (56 pixels) with 6 outputs each.

The TLD-612A has a maximum output power of 360W and uses 3 channels for each pixel for RGB display.

Each TLD-612A has 2 moveable mounting brackets, 2 x RJ45 Art-Net sockets, a loop-through power supply and is IP65 rated. The ArtNet interface is designed for high speed / high flow DMX and can be perfectly used for pixel mapping.

Connections (TLD-612A)
Signal input: Artistic License Art-Net 3
Art-Net data input: RJ45 sockets
Driver Data output: locking 4-pin RJ765 connector

Electrical supply
Power supply: 100-240 V (50 / 60 Hz)
Power consumption: 360 W (max)
Connections: 16A CEE1p (blue) in / out
Protection class: IP65

Dimensions & weight
715 x 80 x 182mm (LxWxH)
Weight: 4Kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=274&productgroup=6&productgroupmain=1

SGM SP6 SixPack

SGM

The SGM SixPack is a further development of the classic Blinder concept. RGBA LEDs are used instead of halogen light sources. The lamp combines six bright 35W LED units with individual control options.
Thus, area lighting, animated text or programmed patterns can be realized with the same device. With the SixPack you not only have access to colour - the LEDs also simulate the decay behaviour of the old halogen bulbs. The trapezoidal housing can be cascaded both horizontally and vertically. So you can create any pixel array with the simple rigging system.

Special properties
6 x 35W RGBA power LEDs
Dimensions: 755x175x107mm
Weight: 8kg
DMX modes: 5, 7, 18, 24, 28, and 48 DMX channels
Power consumption: 250W (7W all LED off)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=50&productgroup=6&productgroupmain=1

SGM Q7W LED Fluter

SGM

The Q-7W is a compact, extremely powerful LED washlight with 1,000 powerful Cool White LEDs. The beam angle is 110° x 110° and the lamp head can be tilted manually up to 110°. The LED lifetime averages over 50.000 hours, the housing is IP65 protected (dustproof and jet water from all sides), the fan module IP55 (protected against dust and jet water from all sides).

The Q-7W has a light output of 60,000 lumens with a maximum power consumption of only 485 W. It is the ideal choice for illuminating buildings and facades, bridges or other objects homogeneously in outdoor areas. But the Q-7W also finds a wide range of indoor applications in TV studios, theatres and wherever a very wide beam angle and homogeneous illumination of crisp white floodlight is required.
. Another important application is as a blinder or strobe light, on stages indoors and outdoors.

Special properties
professional high performance LED floodlight with low power consumption
very low weight of only 8.1 kg
intelligent fan control with optimized low-noise technology
user-friendly, intuitive user interface
Easy communication with the device by integration of the new RFID technology, for automatic stock control and system diagnosis, or for transmission of DMX data for stand-alone applications even when switched off;
DMX or RDM protocol
comfortable stand-alone mode without the use of external controllers
wireless control via Wireless DMX Receiver
various mounting and positioning options
perfect, aesthetic design - combined with the latest LED technology

Features
Light source 1000 Cool White LEDs
Light output 60.000 Lumen
Beam angle 110 degrees
LED service life 50,000 hours
Power consumption 485 Watt/200-240V/50-60Hz
Dimensions: LxWxH 497 x 268 x 122 mm
Weight 8,1 kg
Material Aluminium
Protection class device IP65
Protection class fan module IP55

Optionally available
SGM door panel for P, Q & X series, 4 leaves
SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=49&productgroup=6&productgroupmain=1

SGM Q7 LED Fluter

SGM

The Q-7 is a very compact RGBW floodlight with a combination of 1,000 powerful multichip RGB and another 1,000 cool white LEDs.
A light output of 19,000 lumens (white on), or 28,000 lumens (all LEDs on), a very high luminance and a beam angle of 110 degrees make the Q-7 extremely versatile. The Q-7 can be used universally as a colored/white floodlight, blinder or stroboscope. Due to the IP65 protection class it can be used outdoors without any problems, as well as in the theatre or TV studio due to the almost noiseless fans.
The head of the Q-7 can be tilted by up to 110° and is IP65 protected (dustproof and jet water from all sides), the fan module IP55 (protected against dust and jet water from all sides).

Special properties
Professional high-power LED floodlight with low power consumption (465W)
Very low weight of only 8.1kg
Intelligent fan control with optimized low-noise technology
User-friendly, intuitive user interface
Easy communication with the device through the integration of the new RFID technology, for automatic stock control and system diagnosis, or for the transmission of data for stand-alone applications;
DMX or RDM protocol, comfortable stand-alone mode without the use of external controllers
Wireless control via Wireless DMX Receiver
Various mounting and positioning options perfect
Aesthetic design - combined with the latest LED technology

Features
Light source 1000 RGB Color LEDs + 1000 Cool White LED
Beam angle 110 degrees
LED service life 50,000 hours
Power consumption 465 Watt/200-240V/50-60Hz
Dimensions: LxWxH 497 x 268 x 122 mm
Weight 8,1 kg
Material Aluminium
Protection class device IP65
Protection class fan module IP55

Optional add-on
SGM door panel for P, Q & X series, 4 leaves SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=48&productgroup=6&productgroupmain=1

SGM Q2 LED Fluter

SGM

Based on the successful technology of the Q-7, the Q-2 is a smaller, lighter version and completes the range of compact RGBW floodlights. The Q-2 contains a combination of 432 powerful multichip RGB and 432 Cool-White LEDs ́s. These 864 LED's in total are individually controllable in 3 segments via DMX.

The Q-2 can be used universally as a colored/white floodlight, blinder or stroboscope. Due to its IP65 protection class, it can be used outdoors without any problems, as well as in the theater or TV studio due to its virtually noiseless fans. The head of the Q-7 can be tilted by up to 110° and is fully outdoor-capable.

The Q-2 incorporates all the attributes and characteristics of its big brother, the Q-7, and it can also be used perfectly in combination with it. However, the RFID and W-DMX interface available on the Q-7 has been omitted. Wireless DMX can however be easily implemented using a plug-in receiver for the XLR input.

Optics
Light sources: 864 x RGBW SMD LEDs (5,700K)
LED lifetime 50,000 hours
Lenses: 110°

Photometrics
Light output 12,000 lumen
Efficiency 60 lm/W

Features
Pan/Tilt 0° / 180°
LED Panel 3 individually controllable segments

Electrical data
Alternating current (AC) Power nominal 100 - 277V 50/60Hz
Maximum current consumption 90 - 305V 50/60Hz 275 W (all LEDs on) Typical current consumption 275 W (all LEDs on)
Factor 0.98 PF (230 V)

Programming & Protocol Protocol
USITT DMX512 A

Setting & Addressing
DMX channels 3, 6, 9, 12, 15 or 22
RDM
Stand alone mode
Oled graphic display
4 operating buttons
Software UpDate via uploader cable (P/N:83062011)

Mass & weight
Size (L x H x W) 334 x 223 x 105 mm (13.2 x 8.8 x 4.1 in)
weight 6,0kg
IP class IP65

Temperature
Temperature range Operation -10° to +40°C (-14° to +104°F)
Humidity (max.) 98%
Cooling active, controlled, low noise

Connections
DMX in/out XLR 5pin cable 0,5m
Current Neutrik HD IP65 1m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=257&productgroup=6&productgroupmain=1

SGM Q2W LED Fluter

SGM

The Q-2W is the smaller, lighter version of the Q-7W and completes the range of compact, white floodlights / strobes. With 432 powerful Cool White LEDs, the Q-2 produces a light output of an incredible 26,000 lumens with a maximum power consumption of only 275 W.
The LED surface is individually controllable in 12 individual segments via DMX.

The Q-2W can be used as a pure white floodlight, blinder or stroboscope, and thanks to its IP65 protection class it can be used outdoors without any problems. The head of the Q-7 can be tilted by up to 110° and is fully outdoor-compatible.

The Q-2W incorporates all the attributes and characteristics of its big brother, the Q-7W, and it can also be used perfectly in combination with it.
However, the RFID and W-DMX interface available on the Q-7W was omitted.
However, Wireless DMX can easily be realized by using a plug-on receiver for the XLR input.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=410&productgroup=6&productgroupmain=1

SGM Q10 LED Fluter

SGM

The SGM Q10 , the "big brother" of the well-proven SGM Q7 with more than 4000 SMD LEDs and nearly 60.000 Lumen is like a real lighting miracle.

Special properties
59878 Lumen 110º IP65 RGBW LED Floodlight, Blinder, Strobe
Flicker Free
2,048 RGB SMD LEDs and 2,048 white SMD LEDs with 8 independently controllable zones
CTC stepless 2000K - 10000K
4-leaf and 8-leaf door panels (OPTIONAL)
powerful, fast strobe
maintenance-free
user-friendly display
Wireless Control

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=788&productgroup=6&productgroupmain=1

SGM P6 LED Fluter, 10°, IP66

SGM

The SGM P6 is the succeeding model of the LED floodlight SGM P5 which is still "state of the art".

The P6 differs mainly by more powerful LED chips and the possibility of an uncomplicated change of the beam angle by means of different scattering filters.

Technical data
RGBW LED outdoor floodlight, 10°
IP66 Protection class
24 x 24W RGBW Multicolor LED, 20.500 Lumen
6 individually controllable segments
W-DMX (lumen radio), RDM
variable beam angle due to magnetic interchangeable optics
100 - 277V 50/60Hz, 475 Watt typical (675 Watt max.)

Accessories optional
SGM door panel for P6, 4 leaves
Filter for SGM P6 LED floodlight, medium 19°
Filter for SGM P6 LED floodlight, Wide 45°
Filter for SGM P6 LED floodlight, elliptical horizontal 63°x12°
Filter for SGM P6 LED floodlight, elliptical vertical 12°x 63°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=922&productgroup=6&productgroupmain=1

SGM P5 TW LED Fluter

SGM

The P-5 TW (Tunable White) washlights are perfect for applications where maximum luminous intensity is required and where the colour temperature must be variable or can be adjusted to suit the application. The washlights are not only based on the design of the original P-5 floodlight, but also have the same mechanics and SMPS switching power supply technology as the successful RGBW washlight.

Optical system
44 x High power 10W White LEDs (2,200 - 5,300K) LED lifetime: 50,000 hours
43° lens
Photometric data: Max. luminous efficiency: 30,400 lumen (43° lens); Efficiency: 74 lm/W
Various mounting and positioning options
Perfect, aesthetic design - combined with the latest LED technology

More features
Pan/Tilt: 0° / 110°
Maximum power consumption: 440 W
208 - 250 V Nominal 50/60 Hz
Normal power consumption 410 W
DMX protocol: USITT DMX512 A
Wireless DMX, RDM, stand alone mode
Graphic display / 5 buttons
DMX channels: 2, 4, 6 or 8
Dimensions (L x H x W): 497 x 268 x 122 mm
Weight: 8.9 kg
Material: Aluminium
Protection class: IP65 (with fan IP55)

Optional bookable
SGM door panel for P, Q & X series, 4 leaves
SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=44&productgroup=6&productgroupmain=1

LITECRAFT Studio Par MSR 575M silver

LITECRAFT

The Studio PAR MSR 575M from LITECRAFT combines the classic design of the Studio PAR spotlight with the advantages of the particularly powerful and efficient MSR 575 lamp. The compact and extremely robust headlamp housing is made of die-cast aluminium. The ballast unit and the igniter are located externally in a housing screwed to the headlamp. Maximum luminous efficacy is guaranteed by either the MSR 575 lamp or the MSD 575 lamp with its particularly long service life, in conjunction with a highly refined reflector. The MSR illuminant achieves up to 1,000 and the MSD illuminant even up to 3,000 operating hours. The Studio PAR MSR 575M can be adapted to the respective lighting situation with a wide range of accessories such as colour filter frames and barn door panels.

Features
MSR 575-2/MSD 575
4 different lenses
VNSP (6° x 6°), NSP (7° x 7°) MFL (9° x 19°), WFL (17° x 40°)
Bulb MSR 575/2, 7.200°K
Socket GX 9,5
Optics PAR (Parabolic Aluminized Reflector)
Barndoor panel

Technical data
Mains voltage 230 V 50 Hz
Current consumption 2.6 A at 230 V
Ballast magnetic, internal

housing
Material aluminium die-cast
Colour silver

Dimensions/Weight
Dimensions (L x W x H) 25.0 x 25.0 x 50.0 cm
Weight 12,3 kg
Colour filter frame 19,5 x 19,5 cm
Barndoor panel 19.5 x 19.5 cm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=91&productgroup=8&productgroupmain=1

SLV Nepro Display wall light 120W R7s

SLV

Features

Halogen light in its most natural form
Rotatable up to 350°, tiltable up to 90°
Filigree design due to the slim lamp neck
Easy mounting due to the screw terminal
Ideal for lighting pictures, displays or goods

dimensions and weight
Height: 6 cm
Weight: 1,1kg
Width: 11 cm
Length: 52 cm

Light source:
Socket: R7s
Power: 120 watts
Lamp type: Halogen lamp

colours:
Lamp head: silver grey
Body: chrome colours

Details of the material:
Body: Aluminium
Lamp head: Aluminium

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=86&productgroup=7&productgroupmain=1

SGM P5 LED Fluter

SGM

The -state of the art- architecture light - still up to date ! Compact, quiet but powerful!

The P-5 RGBW LED washlight is the best-selling professional washlight and is perfect for applications where maximum light intensity is required - live, TV, theatre, exhibition stands, fashion shows or architectural applications.

In addition to a wide range of saturated colors, the P5 offers the full range of pastel tones and brilliant white light in a variety of color temperatures with unique brightness thanks to its RGBW LED combination.

Special features
44 x high power RGBW 10Watt LEDs
CTC and white balance
flicker-free operation for camera use
PAN / Tilt 0º 110º
OLED graphic display
Simple menu structure
W-DMX from Wireless Solution
DMX modes: 3 / 4 / 6 / 8 channel
DMX 5 pin in and out
Standard lens with 43º
Max. power consumption 450W
IP55 (device IP 65)
Weight 7,7kg net
Dimensions 368x500x120mm

Optional bookable
SGM door panel for P, Q & X series, 4 leaves
SGM door panel for P, Q & X series, 8 leaves

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=419&productgroup=6&productgroupmain=1

ROBE pickle PATT, silver

ROBE

ROBE is sticking to the success of the PATT 2013 and with the picklePATT is supplying an equally attractive floodlight in retro design but with more compact dimensions. Like its big brother, the picklePATT offers eye-catching lighting for every stage and offers a particularly warm light colour thanks to its gold-coloured reflector.
picklePATT is based on a 392 mm parabolic aluminium reflector which accommodates an HPL 575 lamp. Contrary to the trend, the integration into the show light is not done via DMX but with the help of conventional dimmer packs.

Optical system
Bulb halogen 575 W, approx. 3,200°K
Base G 9.5
Optics PAR (Parabolic Aluminized Reflector) Beam angle 29° (@ 1/2 beam), 94° (@ 1/10 beam)

Technical data
Mains voltage 230/240 V 50/60 Hz
Power consumption approx. 2.5 A at 230 V
Ballast no
Dimensions (L x W x H) 53.1 x 52 x 24.2 cm
Weight 5,3 kg

PACKAGING UNITS 2 pcs or 4 pcs
Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=312&productgroup=7&productgroupmain=1

ROBE PATT 2013, silver

ROBE

In 2013, lighting designer Tim Routledge developed the PATT 2013 together with the company JTE - a floodlight that not only convinced with its warm halogen light but also with its striking retro design. Now this floodlight is being built in series in cooperation with ROBE to meet the demand for this product. The device is based on a parabolic aluminium reflector - PAR - with a remarkable diameter of 550 millimetres and an HPL bulb with 750 watts. Contrary to the trend, the integration into the show lighting is not done via DMX but via conventional dimmer packs.

Features
Halogen 750 W
17° (75° beam angle)
silver Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=300&productgroup=7&productgroupmain=1

SGM P2 LED Fluter

SGM

Based on the revolutionary technology of the P-5, the P-2 presents itself as a smaller, lighter version and rounds off the range of washlights. The P-2 contains 18 pieces of high power LEDs with 10W each, which can be individually controlled in 3 segments via DMX.

The beam angle can be changed by three different lens attachments: 15, 21 and 43 degrees (narrow, medium or wide), where 43 degrees is the standard angle. The P-2 is fully outdoor-compatible due to its IP65 protection class and weighs only 6.1 kg, the maximum power consumption is 275W.

The P-2 has all the attributes and characteristics of its big brother, the P-5, and it can also be used perfectly in combination with it. However, the RFID and W-DMX interface available on the P-5 has been omitted. Wireless DMX can however be easily implemented using a plug-in receiver for the XLR input.

Technical data
Operating voltage: 100 - 277V 50/60Hz
Power consumption: 275 W (all LEDs on)
Dimensions: 334 x 223 x 105 mm
Weight: 6,1kg
DMX channels: 3, 6, 9, 12, 15 or 22

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=51&productgroup=6&productgroupmain=1

ETC Source 4 Zoom 25° - 50°

ETC

Features
25-50 Angles
with cold light reflector optics
Power cable length 1.0m
750 W HPL bulb

optional on request:
IRIS-iris diaphragm Insert
Gobo-holder Insert

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=75&productgroup=7&productgroupmain=1

ETC Source 4 Zoom 15° - 30°

ETC

Features
15-30 angles
with cold light reflector optics
Power cable length 1.0m
750 W HPL bulb

optional on request:
IRIS-iris diaphragm Insert
Gobo-holder Insert

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=75&productgroup=7&productgroupmain=1

ETC Source 4 Par 575W black

ETC

Spotlight with 4 interchangeable lenses (VNSP, NSP, MFL and WFL)
Light output of a conventional PAR 64 spotlight with lower power consumption
High-quality die-cast housing for highest stability
with colour filter frame
with glass reflector
with barndoor

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=78&productgroup=7&productgroupmain=1

SGM P10 LED Fluter

SGM

The P-10 combines the functions of a washlight, strobe, floodlight and pixelblinder in one device. The LED continuous power, loss-free even over hours, is 1,150 watts. The P-10 contains 48 High Power RGBW LEDs with 24W each, resulting in a light output of brute 39,690 lumens with very good dimming characteristics, even in the lower power range.

Special properties
Professional high-power LED washlight
39,690 lumen Light output
48 x 24W RGBW LEDs
Intelligent temperature control with optimized low-noise technology and intelligent fan control;
User-friendly, intuitive user interface
DMX, Wireless DMX or RDM protocol
comfortable stand-alone mode without the use of external controllers;
Various mounting and positioning options
Color compatible with P & Q series products through SGM Color Calibration

Accessories optional
SGM door panel Filter Medium 19° Filter Wide 45° Filter elliptical vertical 12°x 63°
Filter elliptical horizontal 63°x12°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=423&productgroup=6&productgroupmain=1

DESISTI Magis 650W Fresnel

DESISTI

The extremely compact Fresnel spotlight with 650W

Features
Lens type: Fresnel
Lens diameter: 120 mm
Lamp socket: GY-9,5
Lamp type: 650W(CP-89)
Attachment: Mini TV spigot
Hook: Manfrotto Clamp
barndoor Dimensions / mm: 133
Filter frame size / mm: 129
Colour: black
Version: M.O. (manual operation)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=343&productgroup=7&productgroupmain=1

DESISTI Leonardo 5kW Fresnel P.O.

DESISTI

The Leonardo is the universal, compact spotlight with a 300mm Fresnel lens.
With the G38 base the Leonardo can be equipped with CP29.
The excellent optics allow a homogeneous light field, which can be limited very well with the Barndoors.
With the IP22 housing the Leonardo is already protected against vertically falling water drops.
Of course the extensive accessories of Desisti are available.

This Leonardo is pole-operated (P.O.)

Weight: 17 Kg
Power: 5000 Watt
Scope of delivery:
Cable 5m with switch
4 leaves barn door
filter frame
Protective grille

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=438&productgroup=7&productgroupmain=1

SGM P1 LED Fluter, 10° IP65

SGM

The P-1 is a versatile RGBW wash with full wireless operation, designed to meet the needs of corporate productions, broadcast applications, wedding receptions, staging and events.
To further enhance the P-1's versatility, unique magnetic holographic filters allow the P-1 to change its beam angle depending on the application, while the built-in lithium-ion battery allows longer operating times without recharging and eliminates the need for cables or AC power.
The P-1 is an intelligent, reliable and powerful light, housed in a compact, light and elegant assembly: an LED washlight that sets a new standard for the most demanding users.

Special features of the P-1 RGBW Wash Light
Battery operated
RGBW Wash Light with eight High Power LEDs
Based on the design of the P-2
As automatic emergency lighting
Mains or battery operation, 10-12 hours operating time
Completely wireless - Wireless DMX inside
Colour compatible with P & Q series products through SGM Color Calibration
Weatherproof, IP65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=444&productgroup=6&productgroupmain=1

SGM LT 100 LED 3D 1m

SGM

The LT-100 Tubes consist of 1.0m long tubes with a total of 27 pixels, with a pixel pitch of 35mm.

The 3D effect is created by mounting several Graphic-Tubes rows one behind the other or side by side and a control via 3D software (e.g. Madrix LED Lighting Control). A 3D effect is calculated from 2-dimensional objects using special pixel mapping and then each pixel of the LED-Tubes is addressed individually.

The result is three-dimensional waves or bars that can be changed at will in speed, color, brightness and direction.

Required for operation of LT100

TLD-612 A

Technical data
27x 2 RGB LEDs
LED lifetime 50.000 hours
Pixel Pitch 35mm
Light Output 510 Lumen
Beam angle 2x 130°
Addressable pixels: 27

Electrical data
12V ±0.2V direct current / DC
Power 20W (all LEDs on)
Control via SGM TLD 612, TLD 612A or ILD 162

Weight, mass and casing
Dimensions: 1006mm x 27mm
weight: 330g Housing: IP 65; acrylic & aluminium

Optional
extension cable 0,85m
extension cable 1,50m
extension cable 2,00m
extension cable 3,00m
extension cable 5,00m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=260&productgroup=6&productgroupmain=1

SGM LT 200 LED 3D Graphic Tube 2m

SGM

The LT-200 Tubes consist of 1.95m long tubes with a total of 54 pixels at a pixel pitch of 35mm. Each pixel is individually controllable by DMX, by media server or by pixel mapping.

The 3D effect is created by mounting several Graphic-Tubes rows one behind the other or side by side and a control via 3D software (e.g. Madrix LED Lighting Control). A 3D effect is calculated from 2-dimensional objects using special pixel mapping and then each pixel of the LED-Tubes is addressed individually.

The result is three-dimensional waves or bars that can be changed at will in speed, color, brightness and direction.

Required for operation of LT200
TLD-612 A

Technical data
54x 2 RGB LEDs
LED lifetime 50.000 hours
Pixel Pitch 35mm
Light Output 1.020 Lumen
Beam angle 2x 130°
Addressable pixels 54

Electrical data
12V ±0.2V direct current / DC
Power 40W (all LEDs on)
Control via SGM TLD 612, TLD 612A or ILD 162

Weight, mass and casing
Dimensions: 1951mm x 27mm
Weight: 560g
Casing: IP 65; acrylic & aluminium

Optional
extension cable 0,85m
extension cable 1,50m
extension cable 2,00m
extension cable 3,00m
extension cable 5,00m

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=261&productgroup=6&productgroupmain=1

SGM LB 100

SGM

The cascadable LED-Ball segments LB-100 form a graphic or video curtain with 120mm pixel pitch. The individual balls are semitransparent and have a viewing angle of 360°. Besides 2D applications, complex 3D pixel mappings are also possible when using 3D software (e.g. Madrix LED Lighting Control).

Each segment has a length of 0.85m, contains 7 LED balls and one multipin connector each at the top and bottom. Each individual LED ball has a diameter of 34mm and has 2 powerful RGB LEDs embedded in a semi-transparent white plastic ball.

When using 8 individual LB-100 chains, this results in a maximum length of 6.8 meters, with a pixel number of 56 and a total power consumption of only 59 watts. The LB-100 are addressed either directly via DMX or via ArtNet™.

The LED balls are suitable for TV applications, theme parks, exhibition stands, clubs and discotheques, shopping malls and many other applications. Required for operation of LB100: TLD-612 A or ILD LED Driver.

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=280&productgroup=6&productgroupmain=1

ROBERT JULIAT Dalis 862,

ROBERT JULIAT

Designed as an asymmetrical LED foot ramp, the Robert Juliat Dalis 862 has two separately controllable reflector rows to illuminate the near and far field separately. In this way, a wide range of creative applications are possible. In addition, the Dalis 862 offers an extremely homogeneous illumination, with the colour temperature being continuously adjustable from warm white (2,200K) to cool white (6,500K).

Thanks to its fanless cooling, the Dalis 862 can also be used in very noise-sensitive areas. Due to its extremely flat design, it can be placed inconspicuously on stages and its angle of inclination can be adjusted by +/- 5° using the adjustable feet. The integrated Ethernet DMX node allows the use of the Dalis as a converter of RDM, Art-Net and sACN into DMX signals. As a special feature, the Dalis 862 offers four red and blue separately controllable position lights, which for example help performers on stage to find their way around.

As a special feature, the Dalis 862 offers four red and blue, separately controllable position lights, which, for example, help performers on stage to find their way around.

Special properties
Near and far field illumination thanks to two independent LED rows
Integrated LED position lights
Variable colour temperature from 2.200K to 6.500K
LED rows can be controlled in four individual groups
Very flat and unobtrusive design
8/16-bit LED control
Fanless
Flicker-free

Technical data
Beam angle/zoom 90° vertical
Colour temperature 2.200K - 6.500K
Operating voltage/ supply voltage 95-265V AC, 50Hz/60Hz
Power 150W
Power factor (cos φ)0.96
IP classification IP20
Connectors on input side powerCON TRUE1, etherCON, XLR5
Connectors on the output side powerCON TRUE1, XLR5
Dimensions 1005 x 155 x 115mm
Weight 8kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=848&productgroup=6&productgroupmain=1

ROBE PATT 2017, LED

ROBE

The LED-powered PATT 2017 extends Robe's range of retro-style headlamps. It is environmentally friendly and a very special playmate for aesthetic colours and tungsten white light for concerts, TV and film. It scores in lighting situations where the external design of the lamp is important.

Light source
Light source type: 7x 40W RGBW Multichips
Life expectancy of the LEDs: min. 20,000 hours
Typical brightness after 20. 000 hours: 70%

Optical system
550mm parabolic aluminium reflector with highly reflective coating;
The hemispherical diffuser dome ensures even light distribution from the RGBW LED source in the reflector

dynamic effectsbr> Color mixing modes: RGBW or CMY
Individual control of each RGBW pixel
Variable color temperature (CTO): 2700K - 8000K
Virtual colour wheel: with 66 pre-programmed colours
Preprogrammed pixel effects with colors, dimming and strobe, with waves and pulse adjustable in speed and direction;
Shutter: electronic with variable strobe speed (max. 20 flashes per second)
Preprogrammed, randomly generated stroboscope & pulse effects
High-resolution electronic dimming: 0 - 100%

Control & Programming
PATT driver: external
Setting and addressing: 2 row LCD display & 4 control buttons;
Protocols: USITT DMX-512, RDM, ArtNet, Kling-Net, sACN
Wireless CRMX™ technology from Lumen Radio (optional)
DMX protocol Modes: 6
Number of control channels: 13, 32, 40, 47, 53, 60
Color mixing modes RGBW or CMY: Resolution 8 or 16 bit (internal 18 bit) Dimmer: Resolution 8 or 16 bit (internal 18 bit)
Thermal specifications
Maximum ambient temperature: 45°C (113°F)
Maximum case temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)

Electrical specifications and connectors
PATT driver
Power supply: Electronic with automatic range selection
Supply voltage: 100-277 V, 50/60 Hz
Power consumption: 210 W
Power connector: Neutrik powerCON TRUE1 in/out
DMX and RDM data: lockable 3-pin & 5-pin XLR in/out
Integrated network switch 10/100 Mbps: 1x in/1x out
Network interface: RJ45 in/out
Power and data: lockable 4-pin XLR out (from PATT driver to PATT 2017)

PATT2017
Power and data: lockable 4-pin XLR in

Mechanical specifications
PATT driver
Height: 358 mm (14.1")
Width: 82 mm (3.2")
Depth: 162 mm (6.4")
Weight: 3.0 kg (6.6 lbs)

PATT2017
Height: 680 mm (26.8")
Width: 695 mm (27.4")
Depth: 356 mm (14.0")
Weight: 7.2 kg (15.9 lbs)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=849&productgroup=6&productgroupmain=1

moLUX xpo575 LED 6300K

moLUX

The moLUX xpo575 is a new contemporary LED variant in the 575 MSR daylight class. With high output and a high CRI, the xpo575 is a perfect exhibition lamp.

Special properties
31x 10 Watt CREE LED with CRI 90 and 6.300 K
Power: Powercon True1 in/out
Signal: XLR 5pol in/out

Accessories
Lens Kit 25°
Sash door, filter frame, diffuser
Power cable Schuko - True1 Powercon 1,5m

Optional
LED Lens Kit 15°/ LED Lens Kit 35°

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=439&productgroup=6&productgroupmain=1

DESISTI Leonardo 1kW Fresnel P.O.

DESISTI

The Leonardo 1kw is a compact Fresnel spotlight

Features
Lens type: Fresnel
Lens diameter: 150 mm
Lamp socket: G-22
Lamp type: 1000W (CP-71)
Mounting: 28mm spigot
Hook: Avenger Stage Clamp C337
Sash door Dimensions / mm: 192
Filter frame size / mm: 187
Colour: black Version: P.O. (Pole-operated)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=342&productgroup=7&productgroupmain=1

DESISTI Leonardo 2kW Fresnel P.O.

DSISTI

The Leonardo 2kw is a compact Fresnel spotlight

Features
Lens type: Fresnel
Lens diameter: 250 mm
Lamp socket: G-38
Lamp type: 2000W (CP-73)
Mounting: 28mm spigot
Hook: Avenger Stage Clamp C337
Barndoor Dimensions / mm: 344
Filter frame size / mm: 314
Colour: black Version: P.O. ( pole operated)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=342&productgroup=7&productgroupmain=1

MARTIN Rush PAR2 Zoom

MARTIN

The Martin RUSH PAR 2 RGBW Zoom spotlight is a real alternative to conventional PAR lamps. With 12x 10W LEDs it has an impressive light output. From the basic colours RGB and W the user has more than 33 pre-defined colour presets at his disposal. The electronic dimming allows a brightness adjustment of the Martin RUSH PAR 2 from 0% to 100% and additionally different strobe functions. DMX controllable with 5 or 9 channels.

Technical details
LED PAR 12 x 10 W RGBW Osram Ostar LEDs
LED power: 120W
Zoom range: 10° - 60°
33 colour presets plus white
Electronic dimmer: 0%-100%
Strobe effect
Shutter effect: Instant open and blackout
DMX 512 (5 or 9 channels)
5-pin XLR
Control panel with LC display
Neutrik PowerCon power connection
Voltage: 100 - 240 V, 50/60 Hz
Weight 5,5kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=352&productgroup=6&productgroupmain=1

LITECRAFT WashX.21 LED Fluter, IP 65

LITECRAFT

The WashX.21 from LITECRAFT supplements the X-Series with a powerful outdoor floodlight. Compared to many other LED-based floodlights on the market, which with their very narrow beam angles are actually just larger LED spots, the WashX.21 can rightly be called an LED wash. The 21 RGBW LEDs in combination with high-quality optics provide a homogeneous wash effect. Saturated colours as well as pastel shades are mixed very well and convince by their brilliance.

Special properties
RGBW under a lens
Beam angle 40°
Protection class IP 65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=399&productgroup=6&productgroupmain=1

TPIX.7

LITECRAFT

The LITECRAFT TPiX.7 is a matrix beam effect. The "T" in the name stands for tungsten, which takes into account the warm colour temperature of 2,700° Kelvin. The assembly of the panel consists of a total of 49 warm white CREE LEDs, which, equipped with 7° optics, generate a "wall" of beams. Different dimming curves emulate a dimming behaviour as one is used to from halogen light.

TPiX.7 not only offers a matrix effect but can also be used as an audience blinder. The 49 pixels can be freely controlled via DMX, ArtNet or Kling-Net or be played with one of the integrated pixel macros.

Thanks to its robust housing, with compact dimensions of 50 x 50 centimeters and the electronics integrated in the panel, the TPiX.7 can be quickly assembled and disassembled and is recommended for touring use. Further external control components are not necessary for this product.

The TPIX is the alternative to Chromlech Jarag and Chromlech Elidy!

All important settings on the device can be made on the TPiX.7 via a large display.

Features
49x 3 W CREE Warm white 2,700° K LEDs
USITT DMX 512 & ArtNet
ArtNet input & output (RJ 45)
Optical system: fixed optical system
Beam angle 7°

LED light sources
LEDs 49x 3 W CREE Warm white 2,700° K
Colours 49x warm white 2.700° K
Lifetime LEDs > 50.000 hours
Colour mixture warm white 2.700° K

Temperature ranges
Ambient temperature 0°/+40° C
Operating temperature +69° C
Cooling Convention cooled

Effects
Shutter/Strobe (electronic)
Dimmer0-100% linear, 8-bit

Control & Programming
Protocol USITT DMX 512, ArtNet
DMX 512 channels 5/49/54 (3 modes)
Internal memory: 9 pre-programmed sequences with variable speed Test and demo programs, master/slave control;
Menu Display LCD 16 digits, 2 lines
DMX 512 connector XLR 3 pin XLR 5 pin
ArtNet connection 2x RJ 45 EtherCon female

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.8 A at 230 V

housings
Material: die-cast aluminium
Colour: black
Housing protection class IP20

Dimensions/weight
Dimensions (L x W x H) 50.0 x 50.0 x 8.3 cm (without bracket)
Weight7,5 kg
Mounting points Mounting bracket with hole
Locking system for mounting with further panels

Special features
Selectable dimmer curves DHCP or static IP address selectable;
Temperature display
ArtNet input & output (RJ 45)
PowerCon Input & Output
Operating hours counter
Automatic voltage adjustment 100-240 V

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=251&productgroup=6&productgroupmain=1

Public Light 8-Light Blinder

Ultralite

8-Light Blinder
PAR 36 / 650W
Housing: Alu
Colour: Black

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=81&productgroup=7&productgroupmain=1

Public Light 2 Light

DTS

Blinder 2 light PAR 36 / 650W / 230V Housing: Alu Colour: Black

LITECRAFT SunX.10

LITECRAFT

As an alternative, but not only as an alternative to the well-known SunStrip, LITECRAFT offers the SunX.10. The SunX.10 solves the disadvantages of a SunStrip due to conventional illuminants by means of high-quality and long-life LEDs. So the regular exchange of illuminants is now a thing of the past and the power consumption is also reduced many times over.

SunX.10 has 10 warm white LEDs with a colour temperature of 2,800/3,000 K which can be dimmed thanks to high-quality electronics. Furthermore, three curves, selectable via menu or DMX, emulate the dimming of a conventional halogen lamp. The radiation angle is specified at 25 degrees at delivery. For special applications, the reflectors can be quickly and easily replaced and the beam angle adjusted to 10 degrees. Thanks to the clear OLED display, all settings can be made very easily and without a user manual.

Optical system
Optics: fixed optical systems
Beam angle 25°

LED light sources
LEDs: 10x 10 W warm white 2.800° K
Colours: 10x warm white 2.800° K
Lifetime LEDs > 50.000 hours
Colour mixture: Warm white 2.800° K

Temperature ranges
Ambient temperature 0°/+40° C
Operating temperature +69° C
Cooling: convection cooled

Effects
Shutter/Strobe (electronic)
Dimmer 0-100% linear, 8-Bit

Control & Programming
Protocol: DMX 512 DMX 512 channels 5/10/15 (3 modes)
Internal memory: 9 pre-programmed sequences with variable speed test and demo programs, master/slave control;
Menu Display: OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.5 A at 230 V
Material: extruded aluminium profile
Housing protection class IP20
Dimensions (L x W x H) 99.2 x 6.9 x 19.6 cm (with bracket)
Weight 4,7 kg
Mounting points: Mounting bracket with hole

Special features
Selectable dimmer curves
PowerCon input & output
Operating hours counter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=286&productgroup=6&productgroupmain=1

ARRI True Blue ST2 P.O. Black

ARRI

The classic in the incandescent light range with barndoor in the colour black.

Features
Lens type: Fresnel
Lens diameter: 250 mm
Lamp socket: G-38
Lamp type: 2000W (CP-40/73)
Mounting: 28mm spigot
Hook: Avenger Stage Clamp C337
Barndoor Dimensions / mm: 344
Filter frame size / mm: 330
Colour: black
Version: P.O. (pole-operated)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=66&productgroup=7&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

LITECRAFT PowerBarX.15

LITECRAFT

With the PowerBarX.15 LITECRAFT offers the further development of the PowerBar AT10.sx. The model has 15 multichip LEDs with RGBW assembly and is significantly more powerful than its predecessor thanks to the optimized 15° optics. A 20° diffuser is already included in the scope of delivery for more extensive illumination. This means that absolutely perfect colour mixing starts right at the exit of the lens, colour shadows on the object to be illuminated are eliminated. The optimized diffusion filter can be exchanged for other versions at any time with just one movement of the hand.

A single pixel control allows dynamic effects as well as the integration into pixel mapping controllers. The device is controlled via DMX 512 and has programs and colors for stand-alone operation. All settings are easy to make thanks to the OLED display and clear menu system. An extra feature is the battery buffering of the OLED display, allowing settings and addressing to be carried out without power, as well as the optional locking of the display against unauthorized use.

PowerBarX.15 has a particularly robust design and is therefore not only convincing in daily touring use, but is also suitable for longer outdoor use due to its high protection class IP 65. The cabling is flexible and simple with IP-protected connectors in the powerCON True1 and XLR 5 pol.

Optical system
Optics: flexible optical systems
Beam angle: 15°. 20° diffusion filter

LED light sources
LEDs: 15x Multichip LEDs
Colours: 15x red, 15x green, 15x blue, 15x white
Lifetime LEDs > 50.000 hours
Color mixing: RGBW

Temperature ranges
Ambient temperature -20° / +35°C
Operating temperature max. 78°C
Cooling Convection cooling

Control & Programming
Protocol DMX 512
DMX 512 channels 4/6/10/60/65 (5 modes)
Internal memory, stand-alone programs fixed colors, master/slave control
Menu display: OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 47-63 Hz
Current consumption 0.7 A at 230 V

Casing
Material: Aluminium
Colour: black
Housing protection class: IP 65

Dimensions/weight
Dimensions (L x W x H) 99.2 x 16 x 19 cm
Weight 8,3 kg
Mounting: compact Y-bracket for hanging and standing mounting Omega Braket

Special features
RGBW under a lens
Single pixel control
Removable holder for optional diffusion filters
Color macros preprogrammed
Color programs preprogrammed
Stand Alone RGBW Programming
Memory for last operating status
Easy to use menu with OLED display
Selectable dimmer curves
Flicker-free
Operating hours counter
Default Set Function
powerCON True1 input/output
Waterproof XLR 5 pin connectors

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=355&productgroup=6&productgroupmain=1

ARRI 650 Plus Fresnel Silver/blue

ARRI

The classic in the incandescent light range with barndoor in the colour silver/blue.

Features
Lens type: Fresnel
Lens diameter: 112 mm
Lamp socket: GY 9.5
Lamp type: 650W
Attachment: Mini TV spigot
Hook: Manfrotto Uni clamp
Colour: silver/blue

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=70&productgroup=7&productgroupmain=1

LITECRAFT Powerbar 5

LITECRAFT

With the PowerBar 5 LITECRAFT complements its established LED bar with another model with additional amber LEDs. The RGBAW equipment greatly expands the colour spectrum, especially in the area of warm colours, giving lighting designers added value for all areas of stage technology.
. The light output of the PowerBar 5 has also been significantly increased. More efficient control ensures an increase in brightness with the same colours and full compatibility with PowerBar 4 of more than 30 percent.
A combination of PowerBar 4 and PowerBar 5 models is also easily possible. The PowerBar 5 can be adjusted via a specially developed PowerBar 4 mode. Thanks to the extended range of functions LITECRAFT offers with the PowerBar 5 an independent product within the PowerBar series. As with all new LITECRAFT LED products, this device also has the new LC display.

Special features
Color macros preprogrammed
Continuously dimmable
4 DMX zones (running light)
XLR 3/5 pin In/Out
NEUTRIK PowerCon In/Out
Mounting bracket also for vertical mounting
Master/Slave mode

Optical system
Optics: fixed optical systems
Beam angle: 10° x 40°

LED light sources
LEDs: 80x 2 W LEDs
Colours: 16x red, 16x green, 16x blue, 16x cold white (6.000° K), 16x amber;
Lifetime of LEDs: > 50.000 hours
Color mixing: RGBAW

Temperature ranges
Ambient temperature: 0°/+35° C
Operating temperature: max. 45° C
Cooling: Fan

Control & Programming
Protocol: USITT DMX 512
DMX 512 channels: 1/2/3/4/5/9/20 (7 modes)
Internal memory: audio/stand alone programs, fixed colors, master/slave control;
Menu display: LED 4-digit
DMX 512 connector: XLR 3 / 5 pin

Technical data
Mains voltage: 100-240 V, 47-63 Hz
Power consumption: 0.8 A at 230 V

Casing
Material: Aluminium
Colour: black
Housing protection class: IP 20

Dimensions/weight
Dimensions (L x W x H): 110.0 x 15.8 x 18.3 cm
Weight: 6,5 kg
Mounting bracket/base foot with hole

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=58&productgroup=6&productgroupmain=1

LITECRAFT OutLED WT20.swa, IP65 schwarz

LITECRAFT

The OutLED WT20.swa can also be used as a supplement to the previous model, as the LED assembly and all features of the predecessor have been adopted or further developed. The colour temperature can be adjusted continuously in the range between 2,300 and 5,700 Kelvin.   The radiation pattern has changed compared to its predecessor. Whereas the InLED WT20.swa, equipped with a 15 degree optic, had a very narrow beam, the OutLED WT20.swa now features a 25 degree wide and absolutely homogeneous wash.

For control purposes, the device offers identical DMX modes as well as macros and programs. A further plus is the full RDM (Remote Device Management) functionality, which allows settings such as DMX mode and DMX address to be made externally via the DMX line.

With regard to headlamp connectivity, the OutLED WT20.swa has waterproof connectors in powerCON True1 and XLR 5-pin versions instead of fixed connection cables. This means that the spotlight can be used in an absolutely flexible manner and is convincing in terms of handling.

Another advantage is the well-known Y-bracket from LITECRAFT. Here, Omega sealing sleeves are already pre-assembled, which can be extended with the optional Omega Bracket.

Features
SWA under a lens
Stand Alone SWA Programming
Memory for last operating status
Easy to use menu with LC display
Operating hours counter
Default Set Function
powerCON True1 Input & Output
18x 10 W SWA LED
Beam angle 25°
Protection class IP 65

Accessories
powerCON True1 connection cable
Mounting bracket with hole
4-leaf door panel

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=708&productgroup=6&productgroupmain=1

LITECRAFT OutLED AT10.plus

LITECRAFT

Based on the successful OutLED AT10, LITECRAFT introduces the OutLED AT10.plus, the successor product that can also be used as a supplement to the previous model. The reason for this is that all features of the previous series have been taken over and further developed.

Thus the OutLED AT10.plus convinces with a higher light output at comparable values for colors and radiation behavior, but like its predecessor remains absolutely homogeneous in the color mixture.

For control purposes, the device offers identical DMX modes as well as macros and programs. A further plus is the full RDM (Remote Device Management) functionality, which allows settings such as DMX mode and DMX address to be made externally via the DMX line.

Regarding the connectivity of the headlamp, the OutLED AT10.plus has been completely revised. Instead of the fixed connection cables, waterproof connectors are now available in powerCON True1 and XLR 5 pin versions. This makes the spotlight even more flexible in use and convinces in handling.

The advantage of the well-known Y-bracket is the pre-assembled Omega sealing sleeves, which can be extended with an optional Omega bracket.

Details

Optical system
Optics
fixed optical systems
Beam angle 25°

LED light sources
LEDs 18x Multichip
LEDs colors 18x red, 18x green, 18x blue, 18x amber
Lifetime LEDs > 50.000 hours
Color mixing RGBA

tTemperature ranges
Ambient temperature -20° / +35°C
Operating temperaturemax. 58° C
Cooling Fan, temperature controlled

Control & Programming
Protocol DMX 512-A (RDM)
DMX 512 channels 1/2/3/4/8 (5 modes)
Internal memory: audio/stand alone programs fixed colors, master/slave control;
Menu display LCD 8-digit, 2 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V, 47-63 Hz
Current consumption0 ,5 A at 230 V

Casing
Colour black
Housing protection class IP 65

Dimensions/weight
Dimensions (L x W x H) 28.5 x 22.1 x 31 cm
Weight 6 kg Mounting of compact Y-brackets for hanging and standing installation

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=359&productgroup=6&productgroupmain=1

ARRI 300 Plus Fresnel Black

ARRI

The classic in the incandescent light range with barndoor in the colour black.

Features
Lens type: Fresnel
Lens diameter: 80 mm
Lamp socket: GY 9.5 (CP81)
Lamp type: 300W
Attachment: Mini TV spigot
Hook: Manfrotto Uni clamp
Colour: black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=70&productgroup=7&productgroupmain=1

ARRI 650 Plus Fresnel Black

ARRI

The classic in the incandescent light range with barndoor in the colour black.

Features
Lens type: Fresnel
Lens diameter: 112 mm
Lamp socket: GY 9.5
Lamp type: 650W
Attachment: Mini TV spigot
Hook: Manfrotto Uni clamp
Colour: black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=70&productgroup=7&productgroupmain=1

LITECRAFT MarsX.1

LITECRAFT

With the MarsX.1, LITECRAFT offers a hybrid product that can be used both for everyday use as a conventional lighting tool and as a special effect.

MarsX.1 is equipped with a 203 millimetre high quality stepped lens, which is characterised by an absolutely homogeneous radiation pattern. This means that the device can be used classically as a stepped lens for the basic light. The performance is comparable to that of a 1.2 kW halogen spotlight. This is made possible by a 250 Watt LED engine with RedShift function, which gives the warm white light with a colour temperature of 2,700 Kelvin a halogen-typical progression into amber during dimming. The device thus behaves like a conventional spotlight with a halogen light source. The RedShift function as well as the duration of the "afterglow" can be adjusted from the console.

An extra feature of the MarsX.1 is the use as a blind person. Thanks to the RedShift function, the device behaves exactly like a conventional blinder when flashing. The large optics support the effect. In addition, the spotlight is equipped with protection class IP 65 and can therefore also be used outdoors.

For this purpose, the MarsX.1 can also be used as a decorative light thanks to its attractive housing. When dimmed, its large lens provides beautiful eye-catching effects when used with cameras.

The robust design of the MarsX.1 makes it fully tourable. Cabling is done with IP-protected connectors in powerCON True 1 and XLR 5 pin versions. All settings can be made via an OLED display in combination with a clear menu structure. The OLED display is also battery-backed, which means that settings and addresses can be made even when no power supply is available. The display can be locked to prevent unauthorized use.

The optionally available accessory holder holds the colour filter frame and the door trim at the same time.

Optical system
Optics: fixed optical systems
Beam angle 60°

LED light sources
LEDs: 1x 250 W RedShift LED Engine
Colors: 1x warm white 2.700 K (RedShift)
LED service life > 50,000 hours
Colour mixture warm white 2.700 K + amber (RedShift)

Temperature ranges
Ambient temperature 0°/+40° C
Cooling Fan, temperature controlled

Effects
Shutter/Strobe (electronic)
Dimmer0-100% linear, 8-Bit

Control and programming
Protocol DMX 512
DMX 512 channels 3/4/5/6 (4 modes)
Internal memory: stand-alone programs, manual control, master/slave control;
Menu Display: OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 1.2 A at 230 V

Casing
Material: die-cast aluminium
Colour: black
Housing protection class IP 65

Dimensions/weight
Dimensions (L x W x H )38 x 37.1 x 18.8 cm (with bracket)
Weight 8,8 kg
Mounting points compact Y-bracket for hanging and standing mounting;

Special features
RedShift LED Engine
Halogen-typical red drift thanks to additional amber LEDs
Temperature display
Programs preprogrammed
Stand Alone Programming
Memory for last operating status
Selectable dimmer curves
Selectable PWM frequency
Flicker-free
Operating hours counter
Default Set Function
powerCON True1 Input & Output
Waterproof XLR 5 pin connectors

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1425&productgroup=6&productgroupmain=1

LITECRAFT BlindX.4

LITECRAFT

LED-blinder

Special features
4 warm white LEDs
3,000 K
87°
DMX
Aluminium, black
4 LED zone control

With the BlindX.4, LITECRAFT distances itself from all previous LED Blinder versions and presents a new, perhaps daring, but unique design with a high recognition value which can also shine as an eye candy in the camera. And also the inner values are convincing. The four 38 Watt COB LEDs deliver an output that is comparable to conventional 650 W DWE lamps. As far as the colour of the light is concerned, BlindX.4 remains old school - the device does not have a colour mixing system but convinces with a colour temperature of 2,800/3,000 Kelvin, which is equal to that of a halogen bulb.

The control is, as you can expect from a device today, DMX 512 compliant. The entire electronics are already integrated and can be configured quickly, easily and without the need for an instruction manual thanks to the OLED display. This includes menu items such as setting the typical halogen dimmer curve as well as the pulse width modulation frequency for adaptation to modern cameras in TV.

Features
4x 38 W warm white 3.000° K
USITT DMX 512
4 mechanically separately adjustable light sources

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=284&productgroup=6&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

ROBE Robin Tarrantula

ROBE

Designed for concerts, car shows, sporting tournaments, indeed any event in a large venue, the Tarrantula is powered by 36x 40W and 1x 60W high powered emitters providing a stunning 20.000 lumen output. The versatile optical system offers an adjustable beam angle, from a tight 4° spot to a super-wide 50° wash, of the highest quality light. The LEDWash 800 inspired Beam Shaper accessory creates a traditional oval beam that can be indexed to precisely cover the desired stage or performance area. Central to the effects capabilities of this fixture is Robe patented MCFE™ - Multi-Coloured Flower Effects, adding yet another spectacular visual dimension. Driven by the 60W RGBW multichip, this creates the sharpest spikes of light, rotating in either direction with controlled speed. Fully saturated and intense colours as well as subtle pastel tones are created with velvety smooth transitions thanks to the integrated internal 18bit LED dimming system. Dynamic video effects are easily achieved by mapping individual pixels controlled by a DMX desk or media servers via sACN with internal HTP merging, DMX or by Kling-Net protocol.

SOURCE
Light source type: 1x 60W RGBW and 36x 40W RGBW LED multichips (CW and TW also available)
Typical lumen maintenance: 70% @ 20.000 hours
LED life expectancy: min. 50.000 hours

OPTICAL SYSTEM
Robe’s proprietary optical design
High - efficiency zoom optical system, ratio 12,5:1
Zoom range: 4° - 50°
Fixture total lumen output: 20.150 lm
Light output: 80.200 lx @ 5 m

DYNAMIC EFFECTS
Colour mixing mode RGBW or CMY
Individual control of each RGBW pixel
Variable CTO: 2.700K - 8.000K
Virtual Colour Wheel: with 66 preset swatches
Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)
Colour rainbow effect with variable speed
Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patent pending)
Strobe effect: variable speed (max. 20 flashes per second)
Pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 - 100%

CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
Wireless CRMX™ technology from Lumen Radio: On request
DMX Protocol modes: 6
Control channels: 27, 47, 145, 182, 158, 195
Pan/Tilt resolution: 16 bit
R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)
Zoom: 8 bit
Dimmer: 8 or 16 bit (internal 18 bit)

MOVEMENT
Pan movement: 540°
Tilt movement: 220°
Movement control: Standard and Speed
Controllable speed of Pan/Tilt movement
EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patent pending)
Automatic Pan/Tilt position correction

THERMAL SPECIFICATION
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 75°C (167°F)
Minimum operating temperature: -5°C (23°F)

ELECTRICAL SPECIFICATION AND CONNECTIONS
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: 1000 W
Power in connector: Neutric powerCON TRUE1
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in/out: RJ45
Embeded Ethernet switch 10/100 Mbps: 1x in / 1x out

APPROVALS
CE Compliant
cETLus Compliant (pending)

MECHANICAL SPECIFICATION
Height: 587 mm (23.1”)
Width: 508 mm (20”)
Depth: 257 mm (10.1”)
Weight: 21.2 kg (46.7 lbs)
Ingress protection rating: IP20

RIGGING
Mounting positions: Horizontally or vertically
Universal operating position
Mounting points: 2 pairs of ¼-turn locking points
2x Omega adaptors with ¼-turn quick locks
Safety cable attachment point
Tilt transport lock

https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1396&productgroup=5&productgroupmain=1

GLP Impression X4

GLP

The impression X4 is equipped with 19 RGBW LEDs (15 watts each) and a 7°-50° zoom lens. The housing is based on the legendary impression 90 and therefore has all the advantages of the Live Design Award winner. The built-in optics allows a clearly defined hard beam to be displayed in the lower zoom range and is absolutely homogeneous and soft in the middle and upper zoom range. All this without disturbing stray light.

Clean RGBW colour mixing, variable CTO and a finely tuned dimming curve are standard in the impression X4.

The macro effects give the designer additional scope for attractive lighting designs. Light generation:
Additives Colour mixing
19 Osram RGBW high-power LEDs
Service life: 20,000 h

Optics
Motorized zoom: 7° - 50°
Lens hood

Movement
high-resolution 3-phase stepper motor control
8 or 16 bit resolution selectable
maximum speed: 660° pan in 2sec, 260° tilt in 1sec,
Position Feedback

Control system
DMX-512 protocol
illuminated graphic LCD
4 illuminated keys
very quiet, temperature controlled fan cooling
Convection cooling possible if required
Overheating protection
Colour balance calibrateable
Internal color presets
Internal LED Macros

Connections
DMX: XLR 5pin
Mains voltage: Powercon

Operating parameters
Input voltage: 100V-240V, 50-60Hz,350VA
Maximum ambient temperature: 45°C
Operating position: any

Mechanics
Weight 7,5 kg
Dimensions HxWxD 385x340x242mm

Flexible fastening concept
vertical standing: stand with eyelets for ratchet straps
hanging (vertical): thread M10 with non-rotating mounting position for halfcoupler
hanging (horizontal): adjustable rail for lateral truss mounting (optional)
2 eyelets for safety fastening

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=253&productgroup=5&productgroupmain=1

ELATION Artiste DaVinci LED Spot

ELATION

With the Artiste DaVinci, ELATION provides the perfect "workhorse" for almost every purpose and location, as well as the most varied event sizes. The heart of this LED moving light consists of a 270 watt LED engine with cool white colour temperature. It delivers a remarkable light output of more than 12,000 lumen, which ensures highly pleasing results even when using dark colours or gobo/animation combinations.

Optical system
- LEDs2 70 W white light engine, 8.000 K
- Optics Ellipsoidal
- Beam angle/zoom 6°-48° continuous, motorized, 8/16-bit
- Focus infinitely variable, motorized, 8/16-bit

Temperature ranges
- Ambient temperature -25°/+45° C
- Cooling Fan, temperature controlled

Colours
- Color mixing system CMY plus CTO, macros, 8/16-bit
- Color wheel 17 colors plus open
- Color correction infinitely variable
- Rainbow effect infinitely variable, forward/backward

Gobos
- Gobo wheel 1 6 gobos plus open (glass & metal) (29.9 mm) indexable, rotatable, shakeable 8/16-bit
- Gobo wheel 2 9 Gobos plus open (Metal)

Effects
- Iris stepless, motorized, motion macros, 8/16-Bit
- Frost motorized, 8-bit prism 3-fold & linear
- Prism, rotatable, macros, 8/16-bit
-Animation Wheel yes
- Shutter/Strobe 1-18 flashes/sec (electronic), macros
- Dimmer 0-100% linear, 8/16-bit dimmer curves (Standard, Stage, TV, Architectural, Theater)

Control & Programming

- Protocol DMX 512-A (RDM), ArtNet, sACN, E-Fly
- DMX 512 channels 26/28/40 (3 modes)
- Internal memory10 sequences of 64 steps each Test and demo programs, Master/Slave control
- Pan/Tilt Range Pan 540° (630°), Tilt 260°, 8/16-Bit
- Menu display LC display, backlit, battery buffered
- DMX 512 connector XLR 5 pin ArtNet connector 2x RJ 45 etherCON female

Technical data
- Mains voltage 100-240 V, 50/60 Hz
- Current consumption1.7 A at 230 V
- Dimensions/Weight Dimensions (L x W x H) 41.6 x 28.4 x 64.5 cm
- Weight 25,4 kg

Special features
- LED service life approx. 50,000 hours
- Selectable PWM frequency (900-25,000 Hz)
- Selectable gamma adjustment (2.0/2.2/2.4/2.8)
- Variable dimmer curves
- Various blackout modes
- Pan/Tilt Speed channel
- Iris, strobe, prism/gobo macros
- 16 bit channels for pan/tilt, dimmer, CMY+CTO, color wheel, gobo rotation, iris, prism zoom, focus
- Automatic position correction
- Remote DMX reset, partial
- Display Password
- DMX Analyzer
- DMX Channel User Modes (own DMX channel composition)
- DMX patching via DMX
- DMX-Recorder Master/Slave for up to three different devices
- Hibernation (sleep mode/energy saving)
- No DMX Backup (Close, Hold, Auto Program)
- Software update via DMX 512
- Operating hours counter
- Network input & output
- powerCON True1 Input & Output

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=427&productgroup=5&productgroupmain=1

CLAY PAKY Sharpy Wash

CLAY PAKY

With the Sharpy Wash 330, Clay Paky introduces to the market an extremely compact and fast washlight with the energy-saving 330W Platinum lamp from Philips, which is comparable in brightness to 1,000W moving lights. Thanks to its wide zoom range from 6.5° to 48° plus a patented motorized top hat and a beam shaper, the Sharpy Wash 330 also offers numerous design possibilities. In addition, its compact design and low weight of only 18.5kg allow for rapid pan/tilt movements. A colour wheel with eleven colours, a CMY colour mixing system and two frost filters round off the effect palette of the Clay Paky Sharpy Wash 330. - Lamp output 330W
- lamp service life 1.500h
- Beam colour temperature 8.000K
- Zoom 6.5° to 48° and motorized top hat
-CMY-colour mixing
-1 Color wheel with 11 fixed colors (incl. CTO and CTB filters)
- Indexable and rotatable Beam-Shaper
- 2 frost filters

- Operating voltage/ supply voltage 115-230V
- Mains frequency 50Hz, 60Hz
- Power 520VA - Power of the lamp 330W
- Colour temperature 8.000K
- Ballasts electronic
- Beam angle/zoom 6.5°-48°
- Average lamp service life 1,500 h
- Number of circuits / channels 19-22
- CMY color mixing system 1CTO 2 on the color wheel Frost filter2 (light / strong)
- Ovaliser rotatable and indexable Battery buffered display1
- Pan/Tilt 540°/240°
- Dimensions 345 x 405 x 563mm
- Weight 18.5kg IP classification IP20

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=390&productgroup=5&productgroupmain=1

ROBE Robin DL4X Spot, RGBW LED, 10°- 45°

ROBE

Improved, brighter version of the ROBE RGBW LED module enables the DL4X spotlight to use specially modified colour mixing and dimming for extra smooth, stepless operation, especially at minimum brightness and colour output brighter than 1200 watt discharge unit, but with an average very environmentally friendly power consumption of only 250 watts.

The DL4X features an innovative LED driver system for an improved, extremely high-resolution dimming curve for all R, G, B and W colours with 18-bit resolution to enhance the already perfectly smooth colours, fades and dimmers. The optical system produces a very smooth, high quality light output of rich, beautiful colours without shadows and uses a versatile zoom of 10 - 45 degrees. Effects features include a combination of static and rotating gobo wheels with individually interchangeable positions, variable frost, triple prism, super fast aperture, including full-range dimming and variable strobe effects.

Optical system
LEDs 480 W RGBW modules
Optics Ellipsoidal
Beam angle/zoom 10°-45° stepless, motorized
Focus infinitely variable, motor-driven

temperature ranges
Ambient temperature 0°/+45° C
Operating temperature max. 80° C
Cooling temperature controlled fans

Colours
Colour mixing system RGBW/CYM plus CTC, macros
Colour correction 2,700°K, 3,200°K, 4,200°K, 5,600°K, 8,000°K
Halogen dimmer curve (3.200°K, 2.700°K)
Rainbow effect infinitely variable, forward/backward

Gobos
Gobo wheel 1 7 gobos plus open (26.8 mm), slot & lock indexable, rotatable, shakeable 8/16-bit
Gobo wheel 2 9 gobos plus open (26.8 mm), slot & lock

Effects
Iris stepless, motorized, macros, max. 20 Hz, 8/16-bit
Frost stepless, motorized, 8-bit, macros
Prism 3-fold prism 11°, rotatable, 8-bit
Shutter/Strobe electronic, macros
Dimmer 0-100% linear, 8/16-Bit

Control & Programming
Protocol USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2, sACN
DMX 512 channels 22/24/34 (3 modes)
Internal memory 3 sequences of 99 steps each, music trigger test and demo programs, master/slave control
Pan/Tilt control tracking and vector
Pan/Tilt Range Pan 530°, Tilt 280°, 16-Bit
Menu display QVGA touch screen, blue backlit Battery buffered
DMX 512 connector XLR 3 pin XLR 5 pin
ArtNet connection RJ 45 EtherCon female

Technical databr> Mains voltage 100-240 V, 50-60 Hz
Power consumption 0.95 A at 230 V (average)
2.9 A at 230 V (maximum)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=740&productgroup=5&productgroupmain=1

ROBE Robin Spikie

ROBE

ROBE's Spikie is the first LED WashBeam with a point light source. The compact moving light is based on a 60 Watt RGBW LED chip and a 110 millimeter front lens for equally crisp beams and homogeneous washes. The zoom range is flexibly designed with infinitely variable 4 to 28 degrees. This makes the Spikie flexibly applicable for small to medium sized productions in all areas.
As an innovation leader, ROBE provides two additional features that clearly set the Spikie apart from other single beam LED effects on the market. The Flower effect creates hundreds of fine, colorful beams that can be rotated in both directions. The Beam Effect Engine splits the beam into three narrow beams that can also be rotated freely in both directions.

Pan/tilt can be rotated without a stop at Spikie and give further dynamic range. At only 5.5 kilograms, Spikie can be mounted in any position and integrated into the stage design.

Optical system
Optics fixed optical systems
Beam angle/zoom 4°-28° stepless, motorized

LED light sources
LEDs 1x 60 W RGBW COB chip
Colours 1x red, 1x blue, 1x green, 1x white
Lifetime LEDs > 20,000 hours
Color mixing RGBW + CTC
Virtual colour wheel with 66 LEE, 12 BMFL and 10 user colours

Temperature ranges
Ambient temperature +45°C
Operating temperature +80°C
Cooling Fan temperature controlled

Effects
Shutter/Strobe 1-20 flashes/sec (electronic), macros
Dimmer 0-100% linear, 8/16-Bit
virtual halogen dimmer curve
Prism 3-fold prism linear, rotatable, 8-bit
Flower effect

Control & Programming
Protocol USITT DMX 512 (RDM)
DMX 512 channels 21/27 (2 modes)
Internal memory 6 programmable sequences of 25 steps each
Test and demo programs, master/slave control
Pan-Tilt control tracking and vector
Pan-Tilt range
Pan 360° (without stop), Tilt 360° (without stop), 8/16-bit, macros,
Menu Display
LCD 2 lines, blue backlit
DMX 512 connector XLR 5 pin

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.9 A at 230 V

Dimensions/Weight
Dimensions (L x W x H) 40.7 x 27.3 x 22.5 cm
Weight 7,3 kg

Special features
110 mm front lens
CTC Macro Channel
Virtual colour wheel with 66 LEE, 12 BMFL and 10 user colours
Virtual halogen dimmer curve
Various blackout modes
Pan/Tilt Speed channel
Strobe, RGBW macros
16 bit channels for Pan/Tilt, Dimmer, RGBW, Zoom
Automatic position correction
Remote DMX reset, partial
DMX analyzer
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter
powerCON True1 Input & Output
Optional LumenRadio CRMX Wireless DMX

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=322&productgroup=5&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

ROBE Robin T1 Profile

ROBE

The new and the ONE headlamp you need for theatre, television and touring! Now also with the possibility to use with Robes innovative RoboSpot System.

The T1 has been specially designed to meet the high demands of these specialist areas and meets all of them in just one single headlamp. The revolutionary MSL™ (multi-spectral light source) LED module provides a light output of up to 10,075 lumens. This makes it impressively bright - and it does so with whisper-quiet operation.

The T1 Profile is equipped with all the features you would want in a theatre. Any colour and colour temperature is possible for even the most demanding lighting designer, thanks to the simple CMY colour control, a wide range of CCT control from 2700 to 8000 Kelvin and the DataSwatch™ filters, which offer a wide choice of pre-programmed colours. These are also recalibrated automatically or on command by the new Robe RCC™ (Robe Colour Calibration) algorithm, providing the exact colour tones you need, even years later. All theatrical requirements for dimming the spotlight are met brilliantly with our unique, infinitely variable 18-bit dimming system from Robe. The high CRI value of over 90 also ensures natural skin tones. The closed optical system keeps dust and dirt out, thus reducing maintenance to a minimum.

For television use, the T1 offers a special channel for plus/minus green tones, as well as Cpulse™ - a pulse width modulation control for flicker-free light, for example for HD and UHD cameras. These features are complemented by our precise iris slider system, two 0.5° and 10° variable frosts that can be used over the full zoom range, specially designed breakup and aerial gobos, iris, an animation wheel and a prism. All of this enables the perfect execution of your design, whether in the theatre, on television or touring.

You only need one headlight for all this - the T1.

light source
Light source type: 550 W MSL™ (Multi-spectral LED) Engine
Life expectancy of the LEDs: min. 30,000 hours
CRI 90+
Control: automatic or remote on/off
Guarantee on the light source: 3 years or 20,000 hours

OPTICAL SYSTEM
Robe's proprietary optical design
Highly efficient optical zoom system, ratio 7:1
Zoom range: 7° - 49°, covers the preferred range of most theatre and TV spotlights
Light output in lumens: up to 10,075 lm

DYNAMIC EFFECTS
White and color tones calibrated at any time to the factory settings using the new RCC™ (Robe Color Calibration) system, with automatic or on-demand, independent recalibration of the LED engine without the need for external tools
Color mixing: Additive with CMY control mode
Variable color temperature (CTO): 2700K - 8000K
DataSwatch™ Filter: 237 pre-programmed colours and tones including the common white tones with 2700K, 3200K, 4200K, 5600K and 8000K
Tungsten (incandescent) effect: emulation of 750W, 1000W, 1200W, 2000W and 2500W lamps (warm tone shift during dimming and sluggish response/fadeout)
+- Green correction function
Adjustable CRI channel from 80 to 90+
Orifice slider module: 4 individually positionable sliders plus rotating positioning of the entire module +/-60° (patented)
Rotating gobo wheel: 7 rotating, indexable and interchangeable breakup and aerial gobos + open; All gobos are specially selected for theatre and TV applications
Animation wheel: made of aluminium, for single use or in combination with gobos, rotatable in both directions with variable speed
Prism: 6-fold prism with 8°, rotatable in both directions with variable speed
Iris: motorized, infinitely variable, pulse effects up to 3 Hz
Frost: very light 0.5° frost for softening the gobo projection or the iris sliders and a medium 10° frost for a uniform wash, both variable and specially selected for theatre and TV applications
Motorized zoom and focus
Shutter: electronic with variable strobe speed (max. 20 flashes per second)
Preprogrammed, randomly generated strobe & pulse effects
L3™ (Low Light Linearity) - 18 bit dimming without noticeable steps for ultra-fine dimming up to blackout
Due to its particularly quiet operation it is especially suitable for all kinds of theatre and TV productions
Cpulse™: Pulse width modulation (PWM) control for flicker-free light, for example for HD and UHD cameras
Low service requirement due to the sealed effect engine of the head: no smoke or dust can penetrate and thus not contaminate the optical elements such as gobos or lenses

CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe Touchscreen with battery buffer, gravity sensor for automatic screen alignment, operating memory Service log with RTC, stand-alone operation with 3 editable programs (each with up to 100 steps), integrated error analysis for fast error detection
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN
Web server Wireless CRMX™ technology from Lumen Radio (optional)
DMX protocol modes: 3
Number of control channels: 49, 33, 53
Pan/Tilt: resolution 16 bit
Color mixing: resolution 8 or 16 bit (internal 18 bit)
Variable CTO: Resolution 8 Bit
Adjustable CRI channel: Resolution 8 Bit
Green correction +-: Resolution 8 Bit
Aperture slider module motion & rotation: resolution 8 bit
Positioning rotating gobo wheel: Resolution 8 bit
Gobo indexing & rotation: resolution 8 or 16 bit
Rotation animation wheel: resolution 8 bit
Indexing and rotation of the prisms: resolution 8 bit
Iris: resolution 8 or 16 bit
Frost: resolution 8 bit
Zoom: Resolution 8 or 16 bit
Focus: Resolution 8 or 16 bit
Dimmer: Resolution 8 or 16 bit (internal 18 bit)

MOVEMENT
Pan movement: 540°
Tilt movement: 280°
Motion control: standard and reduced speed
Automatic Pan/Tilt position correction
EMS™: Electronic Stabilizer System for Pan & Tilt to reduce light beam deviations caused by crosshead movement or vibration

GOBOS
7 rotating glass gobos
Screen diameter: 23.5 mm
Outer diameter: 26.8 mm
Thickness: 1.1 mm
Maximum thickness: 4 mm
High temperature glass like BOROFLOAT® or better
"SLOT&LOCK" system for easy exchange of gobos

EFFECT WHEEL
Single animation wheel
Material: Aluminium
Can be used individually or in combination with the rotating gobos
Rotating in both directions with variable speed

FRAMING SHUTTERS SYSTEM
Blades: 4 Blades, each individually movable in its position and rotation
Motion: stepless with variable speed
Stepless and very precise movement of the orifice slider module
Rotation: +/- 60° of the complete orifice plate module

THERMAL SPECIFICATIONS
Maximum ambient temperature: 45°C (113°F)
Maximum case temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)

ELECTRICAL SPECIFICATIONS AND CONNECTORS
Power supply: Electronic with automatic range selection
Supply voltage: 100-240V, 50/60 Hz
Power consumption: Max. 750W at 230 V / 50 Hz (all LEDs on)
Power connector: Neutrik powerCON TRUE1 in
DMX and RDM data: lockable 3-pin & 5-pin XLR in/out
Network interface: RJ45 in

RELEASE
CE conformity
cETLus match

MECHANICAL SPECIFICATIONS
Height: 726 mm (28.6") - head in vertical position
Width: 400 mm (15.7")
depth: 258 mm (10.2") - head in vertical position
Weight: 24.3 kg (53.6 lbs)
IP protection class: IP20

RIGGING
Mounting positions: Horizontal or vertical
Ready for operation in any position
Attachment points: 2 pairs of mounting points with 1/4 turn quick release fasteners
2x Omega adapters with 1/4 turn quick release fasteners included
Anchor point for safety cable
Pan&Tilt transport safety device

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1438&productgroup=5&productgroupmain=1

LITECRAFT BeamX.7 IP65

LITECRAFT

With the BeamX.7 IP, LITECRAFT now delivers the successful BeamX.7 in a weatherproof outdoor version. The device has a high light output despite low power consumption. The beam's characteristic is narrowly defined at ten degrees, which extends the classic application possibilities as truss toner by beamwork effects. For a wider beam angle, the included frost filter can be mounted quickly and easily on the device, thus extending the beam to approximately 25 degrees.

Like all LITECRAFT products, the BeamX.7 IP has a Y-bracket that can be optimally locked in any position. The high-quality die-cast aluminium housing is shapely, robust and thermally optimized, so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations. Of course, with its compact dimensions, the device also fits into standard 290 mm trusses.

The BeamX.7 IP is equipped with XLR 5-pin IP connectors and powerCON True1 connectors - each as input and output. This allows the device to be easily looped through and discreetly wired. Alternatively, it can be controlled via an IR remote control. Furthermore, internal programs as well as fixed colours are available, which, like all configurations, can be selected quickly and easily on the LC display.

Optical system
Beam angle 10° (frost filter as option)
LEDs 7x Multichip LEDs
Colours 7x red, 7x green, 7x blue, 7x white
Lifetime LEDs > 50.000 hours
Color mixing RGBW

Temperature ranges
Ambient temperature 0°/+45° C
Operating temperature max. 50° C
Cooling: convection cooling

Control & Programming
Protocol DMX 512, IR remote control
DMX 512 channels 2/3/4/5/10 (5 modes)
Internal memory
Stand Alone Programs
Macros, fixed colors
Master/slave control
Menu display LCD 8-digit, 2 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 47-63 Hz
Current consumption 0.2 A at 230 V

Casing
Material: Aluminium
Colour: black
Housing protection class IP 65

Dimensions/Weight Dimensions (L x W x H) 23,6 x 17 x 26,9 cm
Weight 3,5 kg
Mounting: compact Y-bracket for hanging and standing mounting

Special features
Color programs preprogrammed
Color macros preprogrammed
Stand Alone RGBW Programming
Memory for last operating status
Easy to use menu
Default Set Function
Mounting bracket also for vertical mounting
powerCON True1 Input & Output

Accessories included
powerCON True1 connection cable
Infrared remote control
Frost filter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1410&productgroup=6&productgroupmain=1

ROBE Robin MegaPointe

ROBE

MEGA bright with MEGA features and still compact. The MegaPointe from Robe.
The brand new MegaPointe takes the original all-in-one device to a whole new level.

Unleash your creativity with bright, sharp parallel beams, excellent gobo projection, precise motion, smooth CMY color mixing and dimming, and a variety of beam splitting, washing and shaping effects.
Robe's R & D team worked with Osram to supply a 470 W lamp that is perfectly matched to the innovative optical system. This design offers a brilliant, crystal clear, sharp-edged beam, adjustable from a powerful 1.8 to a wide 42 degree zoom.
. Both static and rotating (glass) gobos produce precise in-air effects or projected images with a sharp, high-contrast, flat field. The newly developed effects engine can create 12 different beam and flower effects. The beam can also be shaped with innovative shutter emulation, creating a completely new blend of content and creativity.

Features
CMY mixing
rotating and static gobo wheel
Animation wheel
12 Ray and flower effects
1.8 ° - 21 ° beam mode, 3 ° - 42 ° spot mode
Osram Sirius HRI 470 W RO

Optical system
Optical zoom system: 14: 1
Zoom range: 1.8 ° - 21 ° beam mode / 3 ° - 42 ° spot mode
Output lens diameter: 150 mm
Light output: beam mode 1.8 °: 2,200,000 lx @ 5 m / beam mode 1.8 °: 137,500 lx @ 20 m / spot mode 3 °: 715,300 lx @ 5 m / spot mode 3 °: 44,710 lx @ 20 m

effects
Cyan: 0 - 100%
Magenta: 0 - 100%
Yellow: 0 - 100%
Colour wheel: 13 dichroic filters + white
Rotating gobo wheel: 9 rotating, indexable and interchangeable gobos + open
Static gobo wheel: 14 gobos + open
Animation wheel: Aluminium animation wheel, single or in combination with gobos, which rotates with variable speed in both directions
Innovative Effect Engine consisting of 6 prisms on two wheels that create 12 different beam and flower effects (patent pending)
Beam Shaper emulates Framing Shutters and creates rectangular beam shapes, rotatable and indexable (patent pending)
Frost: variable 1 ° (light) and 5 ° (medium)
Motorized zoom and focus
Remote Hot Spot Control: adjustable from 5: 1 to 2.5: 1 in Spot mode and from 7: 1 to 2.7: 1 in Beam mode (patent pending)
Preprogrammed random strobe and pulse effects
Dimmer: 0 - 100%

Control & Programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravity sensor for automatic screen positioning, operating memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyzer for easy troubleshooting
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
Wireless CRMX ™ Technology from Lumen Radio
DMX protocol modes: 2 control channels: 39.34
Pan / Tilt resolution: 8 or 16 bit
Color wheel positioning: 8 or 16 bits
CMY: 8 Bit
CRI selection: 80 or 90
Rotating gobo wheel Positioning: 8 Bit
Gobo indexing & rotation: 8 or 16 bit
Static positioning of the gobo wheel: 8 bits
Animation wheel: 8 bits
Animation of wheel rotation: 8 or 16 Bit
Prism Indexing & Rotation: 8 Bit
Frost: 8 bit
Zoom: 8 or 16 bit
Focus: 8 or 16 bit
Hot-Spot: 8 Bit
Dimmer: 8 or 16 bit

pan/tilt
Swivel movement: 540 °
Tilt movement: 270 °
Motion control: standard and speed
Automatic Pan / Tilt position correction
EMS ™: Electronic motion stabilization system for Pan & Tilt to reduce beam deviations caused by crosshead movement or vibrations (patent pending)

Rotating gobos
Glasgobos: 9 rotating gobos
Outer diameter: 15.9 mm
Image diameter: 12.5 mm
Thickness: 1.1 mm
High temperature borofloat or better glass
"SLOT & LOCK" system for easy exchange of gobos

Static gobos
Aluminium wheel with fixed gobos: 10 gobos & 4 beam reducers + open position

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=721&productgroup=5&productgroupmain=1

LITECRAFT Beam X.7

LITECRAFT

With the BeamX.7 LITECRAFT presents the successor of the MiniPAR AT10. Compared to its predecessor, the BeamX.7 offers even more performance and professional features.

With its advanced optical system, the BeamX.7 achieves a significantly increased output despite reduced power consumption. The characteristics of the beam are more defined, which extends the classic application possibilities as truss toner by beamwork effects.

As with all new LITECRAFT products, housing and mechanics have been optimized. The unit has a new Y-bracket that can be optimally locked in any position. The high-quality housing, milled from aluminum, is shapely, robust and thermally optimized, so that the device does not need active ventilation. This means that it can also be used in particularly noise-sensitive locations.

The BeamX.7 is equipped with XLR 5-pin and powerCON connectors - each as input and output. Thus, it can be easily looped through and discreetly wired. Alternatively, it can be controlled wirelessly via an IR remote control or with an optionally available LumenRadio CRMX module. Internal programs and fixed colours are also available, which, like all configurations, can be selected quickly and easily on the LC display.

Technical details
Optical systembr> Optics: fixed optical systems
Beam angle 10°

LED light sources
LEDs: 7x multichip LEDs
Colours: 7x red, 7x green, 7x blue, 7x white

Lifetime LEDs > 50.000 hours
Color mixing RGBW

Temperature ranges
Ambient temperature 0°/+45° C
Operating temperature max. 50° C
Cooling: convection cooling

Control & Programming
Protocol DMX 512
DMX 512 channels 2/3/4/5/10 (5 modes)
Internal memory Stand alone programs
Fixed colors, master/slave control
Menu display LCD 8-digit, 2 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 47-63 Hz
Current consumption 0.2 A at 230 V

Housing
Material: Aluminium
Colour: black, anodized
Housing protection class: IP 20

Dimensions/weight
Dimensions (L x W x H) 21.6 x 15 x 23.1 cm
Weight 2,3 kg

Special features
Color programs preprogrammed
Stand Alone RGBW Programming
Memory for last operating status
Easy to use menu with LC display
Default Set Function
Mounting bracket also for vertical mounting
powerCON input & output

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=351&productgroup=6&productgroupmain=1

LITECRAFT AT60 OutLED Zoom

LITECRAFT

The OutLED AT60.zoom IP65 is the successor of the well-known LITECRAFT OutLED AT10. The new device impresses with a number of innovations that make the spotlight even more flexible in use. It is based on the OSRAM Ostar 60 Watt chip with RGBW colour mixing. This makes the OutLED AT60.zoom the first LITECRAFT LED spotlight to have a point light source that is more harmonious, especially in backlighting. A further decisive advantage is the natural shadow reproduction. The colour shadow patterns familiar from individual multicolour LEDs are completely eliminated by the new LED generation. This also applies to LITECRAFT AT60.

To adapt to changing lighting situations, the device has a stepless, motor-adjustable zoom which, with its range of 5.5 to 40 degrees, enables both a focused beam and a homogeneous washlight. The high-quality optics were developed with special attention to the best possible colour mixing in all beam ranges.

The control is done via DMX 512 either in 8 or 16 bit. The behaviour can also be varied via adjustable modes. In addition, the OutLED AT60.zoom has various speed-adjustable programs and fixed colors as well as manual adjustment options for stand-alone operation. All settings are easy to make thanks to the OLED display with touch-sensitive buttons. The menu system displays all information clearly, so that users can make settings quickly even without a user manual. An extra feature is the battery buffering of the OLED display, which allows settings and addresses to be made even without power, for example in a flight case.

Optical system
Optics: interchangeable optical systems
Beam angle 5,5°-40° , stepless, motorized

LED light sources
LEDs: 1x 60 W COB RGBW LED
Colours: 1x red, 1x green, 1x blue, 1x white
Lifetime LEDs > 50.000 hours
Color mixing RGBW

Temperature ranges
Ambient temperature -20° / +35°C
Operating temperature max. 78°C
Cooling: Fan, temperature controlled

Control & Programming
Protocol DMX 512
DMX 512 channels 5/7/10/11/13/17 (6 modes)
internal memory Audio/Stand Alone Programs
Fixed colors, master/slave control
Menu display OLED 16-digit, 3 lines
DMX 512 connector XLR 5 pol

Technical data
Mains voltage 100-240 V 47-63 Hz
Current consumption 0.4 A at 230 V
Housing protection class IP 65
Dimensions (L x W x H) 26.0 x 18.6 x 36.4 cm
Weight 5,5 kg
Mounting: compact Y-bracket for hanging and standing mounting

Special features
RGBW in an optic
Extended colour spectrum thanks to additional white LED
colour macros pre-programmed
Color programs preprogrammed
Stand Alone RGBW Programming
Memory for last operating status
Easy to use menu with OLED display
Selectable dimmer curves
Selectable PWM frequency
Flicker free
Operating hours counter
Default Set Function
powerCON True1 input/output
Waterproof XLR 5 pin connectors

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=285&productgroup=6&productgroupmain=1

LITECRAFT AT10.sx

LITECRAFT

The LED Bar of the latest generation: 18x multicolour LEDs, RGBW, 20° x 50°, DMX, LED single control, aluminium, black

Special features
LED single control (Single Pix)
RGBW under a lens
Particularly good colour mixing
Color macros preprogrammed
Continuously dimmable
Housing protection class IP20
Mounting bracket also for vertical mounting
Mounting bracket continuously horizontally adjustable
Master/Slave mode
NEUTRIK PowerCon In/Out
RJ 45 EtherCon Software Upload Port

Optical system
Optics: fixed optical systems
Beam angle: 20° x 50°

LED light sources
LEDs: 18x 10 W Multicolour LEDs
Colours: 18x red, 18x green, 18x blue, 18x white
Lifetime of LEDs: > 50.000 hours
Color mixing: RGBW

Temperature ranges
Ambient temperature: 0°/+35° C
Operating temperature: max. 61° C
Cooling: Fan

Control & Programming
Protocol: USITT DMX 512
DMX 512 channels: 1/2/3/4/8/72 (6 modes)
Internal memory: audio/stand alone programs, fixed colors, master/slave control
Menu display: LCD 8-digit, 2 lines
DMX 512 connector: XLR 5 pin

Technical data
Mains voltage: 100-240 V, 47-63 Hz
Power consumption: 0.6 A at 230 V

Housing
Material: Aluminium
Colour: black
Housing protection class: IP 20

Dimensions/weight
Dimensions (L x W x H): 100.0 x 21.0 x 21.0 cm
Weight: 7,8 kg
Mounting: Mounting bracket/base foot with hole

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=59&productgroup=6&productgroupmain=1

GLP/ EHRGEIZ Fusion SF20 RGBW, IP65

GLP/ EHRGEIZ

The Fusion 2 marks the beginning of a new era in linear lighting. Thanks to its intelligent plug-in system, the Fusion 2 can be used to create seamless light lines - horizontally or vertically, indoors or outdoors. Most so-called "bars" are too weak to produce a homogeneous surface light. With the Fusion 2 it is no problem to change the beam angle with its diffuser filters between Beam, Flood or asymmetrical. Even when using these filters the Fusion 2 produces more than enough light output. Today, light lines have become an important part of modern stage design. With the Fusion 2, a device is now available for such applications, which is also completely fanless. Thanks to this feature, the Fusion 2 is as flexible as can be. Whether in a theatre or at a concert - indoor or outdoor - the Fusion 2 is the right choice.

Light source
20 x 15W RGBW LED class
LED service life: approx. 20,000 hours

Optical system
ConstantColor™ Optics
Beam angle 6°

Functions
RGBW, 8 or 16 bit resolution
SteadyColor™ Dimming
Stepless CTO
Virtual colour wheel with 39 colours including white (2,700 K, 3,200 K, 4,200 K, 5,600 K, 7,200 K and 8,000 K)
Each LED in each colour can be controlled individually
Pattern effect with variable speed
High resolution dimmer 0-100%
Selectable dimmer curves
Strobe with variable speed (max. 20Hz )
Preprogrammed Random Strobe and Pulse effects

Thermal conditions
Max. ambient temperature: 45° C (113° F)
Convection cooling
Control and programming
Setting and addressing via OLED display with 4 keys
Protocol: USITT DMX-512
8 DMX control modes
Stand Alone Mode
Wireless DMX optional
RDM
DMX In/Out: XLR 5 pin (IP65)
Power In/Out: Neutrik powerCON TRUE1

Mains connection
Electronic switching power supply with automatic recognition
Input voltage: 100-240V AC, 50/60 Hz
Max. Power consumption: 330 W

Mounting
2x M10
2x Omega Bracket
1 safety eyelet
2x stand with manual horizontal tilt

Hardware
IP65 Protection class
Height with stand: 231 mm (9.09")
Height without stand: 181 mm (7.12")
Width: 90 mm (3.54")
Length: 1006 mm (39.60")
Weight: 12.5 kg (27.55 lbs)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1394&productgroup=6&productgroupmain=1

GLP KNV Cube

GLP

The KNV LED system from GLP is used either individually or in combination. The designers can fall back on two basic shapes: the cube-shaped KNV Cube and the KNV Arc - a device in the shape of an octagonal ring.

For the first time, both devices combine strobe, blind and pixel block, can be combined quickly and in any way and offer undreamt-of creative freedom for scenic elements. From the use as a single device, structures, wavy lines to huge matrices or letters, everything is possible.

The GLP KNV system has 25 power pixels each, each consisting of a Hyper-Bright Power White LED for maximum brightness and effect and a surrounding ring of 16 RGB multicolor LEDs for creative effects and backlighting. All together it brings one module to 50.000 lm!

The KNV gains extreme versatility thanks to its IP 54 housing, which allows the system to be used on front trusses at festivals or for many other outdoor applications. Thanks to the power/data daisy chain, several devices can also be easily wired.

Two powerful FX engines provide easy control, allowing you to quickly generate outstanding effects.

Technical data
KNV light source Power Pixel
1 x 30 W Hyper White
16 x 0.5 W RGB
Power pixel number 25 (5 x 5)

Control
control modesbr> Normal
Compressed
Pixel Mapping

Display
Illuminated graphic LCD
Self-charging buffer battery
Illuminated buttons

Protocol(s)
USITT DMX-512

coolingbr> Temperature controlled
Overheating protection

Connections
Signal connection: etherCON
In/Out

Mains connection
n/Out
Neutrik powerCON TRUE1

Operating parameters
Mains voltage 100-240 VAC / 50-60Hz
Power (Watt @ 230V) 750 W Max.
Ambient temperature 40°C / 104°F
Operating position: any
Protection class (IP) 54

Installation/mounting
Combined length/standing bar
KNV Connector

Delivery
Tourpack 6-fold flightcase
Housing colours: black

Dimensions & weight
Depth of the base area 250 mm
Width of the base area 250 mm
Height (head vertical) 250 mm
Weight 9,3 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=787&productgroup=6&productgroupmain=1

GLP KNV Arc

GLP

The KNV LED system from GLP is used either individually or in combination. The designers can fall back on four basic shapes: the single KNV Dot, the KNV Line with its single LED row, the cube-shaped KNV Cube and the KNV Arc - a device in the shape of an octagonal ring.

For the first time, all four devices combine strobe, blind and pixel block, can be combined quickly and in any way and offer undreamt-of creative freedom for scenic elements. From the use as a single device, structures, wavy lines to huge matrices or letters, everything is possible.

The GLP KNV system has 1, 5 or 25 power pixels, each consisting of a Hyper-Bright Power White LED for maximum brightness and effect and a surrounding ring of 16 RGB multicolor LEDs for creative effects and backlighting. All together it brings a module up to 50.000 lm!

The KNV gains extreme versatility thanks to its IP 54 housing, which allows the system to be used on front trusses at festivals or for many other outdoor applications. Thanks to the power/data daisy chain, several devices can also be easily wired.

Two powerful FX engines provide easy control, allowing you to quickly generate outstanding effects.

Technical data

KNV light source
Power Pixel
1 x 30 W Hyper White
16 x 0.5 W RGB
Power Pixel Number: 25 (5 x 5)

Control & Programming
control modes
Normal
Compressed
Pixel Mapping

Display
illuminated graphic LCD
self-charging buffer battery
illuminated keys
Protocol(s)
DMX (USITT DMX512-A)

Cooling
temperature controlled
Overheating protection

Connections
signal connection
etherCON
In/Out

Mains connection
Neutrik powerCON TRUE1
In/Out

Operating parameters
Mains voltage: 100 - 240 VAC / 50 - 60 Hz
Power (Watt @ 230V)750 W
Max. ambient temperature: 40°C / 104°F
Operating position: any
Protection class: IP 54
EEK: A
EEI0.218 Ec (kWh/1,000h)742

Installation, mounting
KNV Connector

Dimensions & weight
Height (head vertical)250 mm / 9.8 in width (arm to arm)
Weight: 9.3 kg / 20.5 lbs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1413&productgroup=6&productgroupmain=1

GLP Impression X4 Atom

GLP

With its compact housing, the X4 atom is suitable for all applications where high light output and low space requirements are a factor: In film and TV sets, for event lighting as well as on concert stages and in the architectural sector.

The X4 atom features the same high-power LED used in the impression X4 series. This means that the X4 atom offers the designer a wide range of rich and vibrant colours to soft pastel shades.

The optics are also based on the X4 series - but a larger front lens provides even more power and an even tighter beam. The automated 9:1 zoom system thus offers the designer a 3.5° narrow beam effect up to a 35° wide wash effect.

But that is by no means all. The housing is protected against damage by dust and water (IP65). This enables installation in outdoor areas.

An easy to use locking system allows to connect several X4 atom with each other in no time: Pairs, quads, lines, up to a huge LED display - the number of variants is almost endless. If required, additional attachment filters (e.g. frost filters) can be attached to the optionally available mounting bracket.

The X4 atom is powered by an external power supply, which also transmits DMX data via a 4-pin XLR Neutrik connector. A rechargeable battery PowerPack is also available as an accessory.

Technical data
LED light source
LED type: Osram Ostar
Lifetime (hours): 50.000
LED quantity: 1 LED colors RGBW / CwWw

Optics
minimum zoom (degrees): 3.5
maximum zoom (degrees): 34

Control
Protocol(s): DMX-512

Cooling
Temperature controlled
Overheating protection

Connections
Signal connection: XLR 4-pin

Operating parameters
Max. ambient temperature: 45°C / 115°F
Operating position: any

Installation, mounting
Combined hanging / standing frame
Mini TV spigot
Connected connection via trussbar

Dimensions & weight
Depth of the base area: 127 mm
width of the base area: 127 mm
Height (vertical head): 196 mm
Weight: 1,8 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=349&productgroup=6&productgroupmain=1

ETC Source 4 LED Fresnel Adapter

ETC

The adapter turns the Source 4 LED Profiler into a real Fresnel headlight.

It fits any Source Four LED basic package of the series 1 or 2, 7460A2016

Physical
Durable aluminum injection molded housing
Fits all standard Source Four LED base packages
- *Not suitable for use with HPL Source Four fixtures*
Compatible with ETL and CE headlights
Simple and fast handling
Compact optics
One-hand operation of the accessory drawer
Simple setup
Only available in black housing colour

Optical
Bright light with soft edges
Maximum colour reproduction thanks to the unique ETC colour mixing system
26° - 68° Field diameter/ 15°-50° Beam diameter
Door panels
Heat and impact resistant polycarbonate lenses

Optional
ETC SF HAL/LED Fresnel Door trim

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=290&productgroup=6&productgroupmain=1

ETC Source 4 LED CYC Adapter

ETC

The adapter turns the Source 4 LED Profiler into a full-fledged panorama light.

It fits any Source Four LED basic package of the series 1 or 2, 7460A2016

Physical
Durable aluminum injection molded housing
Fits all standard Source Four LED base housings Note: Not suitable for use with HPL Source Four fixtures.
Compatible with ETL and CE headlights
Can be mounted on the top and/or bottom side
Simple and flexible setup

Optical
Bright, uniform light with soft edges
Maximum colour rendering thanks to the x7 colour mixing system from ETC
Uniform illumination up to 12.2 m (illuminated from above and below)
Efficient 2:1 distance ratio (e.g. 2 m distance between the devices at 1 m distance to the background) - Recommended optimal distance ratio: 1.5:1
Heat- and impact-resistant polycarbonate lenses Optional: ETC SF HAL/LED Cyc Door blind

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=291&productgroup=6&productgroupmain=1

ELATION Sixbar 1000

ELATION

The Sixbar 1000 is based on twelve multicolour LEDs with 6-colour assembly in the colours red, green, blue, white, amber and UV. The displayable colour spectrum is therefore particularly wide and gives the user more flexibility in realising his design. The 30° beam angle is ideal for homogeneous illumination of horizons. The frost filter included in the scope of delivery ensures excellent colour mixing directly at the light exit. The optionally mountable glare shield, which is also included in the scope of delivery, prevents a direct view into the optics.

Each of the twelve LEDs can be controlled separately to display colour gradients or moving light scenarios. Backlight applications or matrix inserts are also possible, the device is equipped accordingly. In addition to DMX 512-A with full RDM support, ArtNet and the advanced Kling-Net protocol are also available, making integration into media server systems such as ArKaos child's play. As with all ELATION LED products, variable dimmer curves as well as various macros and effects to assist users in programming are part of the basic equipment.

The Sixbar already offers extensive equipment as standard. The bracket allows both hanging and standing installation without any additional accessories. Magnets have been integrated on the sides of the housing to ensure that several units can be optimally aligned side by side. On the connection side powerCON inputs and outputs as well as XLR 3 and 5 pin are available. The ArtNet or Kling-Net protocol is connected via high-quality etherCON connectors with corresponding loop-through options.

12x 12 W RGBAW+UV LEDs, 30°
DMX 512-A (RDM), black
incl. frost filter
incl. lens hood
incl. power cord Schuko->Powercon

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=525&productgroup=6&productgroupmain=1

Die Sixbar 1000 basiert auf zwölf Multicolor-LEDs mit 6-Farb-Bestückung in den Farben Rot, Grün, Blau, Weiß, Amber und UV. Das darstellbare Farbspektrum ist daher besonders groß und ermöglicht dem Anwender mehr Flexibilität bei der Realisierung seines Designs. Der Abstrahlwinkel von 30° eignet sich optimal für eine homogene Ausleuchtung von Horizonten. Dabei sorgt der im Lieferumfang enthaltene Frostfilter für eine sehr gute Farbmischung unmittelbar am Lichtaustritt. Der ebenfalls im Lieferumfang enthaltene und optional montierbare Blendschutzflügel verhindert den direkten Blick in die Optiken.

Jede der zwölf LEDs lässt sich separat ansteuern, um auch Farbverläufe oder bewegte Lichtszenarien darzustellen. Gegenlicht-Anwendungen oder Matrix-Einsätze sind ebenfalls möglich, das Gerät ist entsprechend ausgestattet. Neben DMX 512-A mit voller RDM-Unterstützung stehen auch ArtNet- sowie das fortschrittliche Kling-Net Protokoll zur Verfügung, wodurch die Einbindung in MediaServer-Systeme wie ArKaos zum Kinderspiel wird. Wie bei allen ELATION LED-Produkten gehören variable Dimmerkurven sowie diverse Macros und Effekte zur Unterstützen der Anwender bei der Programmierung zur Grundausstattung.

Die Sixbar bietet bereits serienmäßig eine umfangreiche Ausstattung. Der Bügel ermöglicht sowohl eine hängende als auch stehende Montage ohne weiteres Zubehör. An den Gehäuseseiten wurden Magnete integriert, welche für die optimale Ausrichtung von mehreren Geräten nebeneinander sorgen. Auf der Anschlussseite stehen powerCON Ein- und Ausgänge sowie XLR 3 und 5 pol zur Verfügung. Das ArtNet- beziehungsweise Kling-Net Protokoll wird über hochwertige etherCON Steckverbinder mit entsprechenden Durchschleifmöglichkeiten verbunden.

12x 12 W RGBAW+UV LEDs, 30°
DMX 512-A (RDM), schwarz
incl. Frostfilter
incl. Streulichtblende
incl. Netzkabel Schuko->Powercon

Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=525&productgroup=6&productgroupmain=1

ETC Source 4 LED 2 Daylight HD

ETC

Light that belongs on television! The arrays for Daylight HD are designed for TV studios and other applications where high definition lighting is a must. Thanks to flicker-free operation - even at high speed - the Daylight HD arrays look great on screen. The Daylight HD spotlight produces a variable cold white (4000 to 6500 K) that looks like natural sunlight. Colour temperatures and shades (pink and green tint) can be adjusted to make people look good to both the eye and the camera. Both arrays have an extremely high lumen output, making them the brightest in their class.

Special properties
60 Luxeon® Rebel LED Emitters
20.000 hours LED life time
Inserts for glass and metal gobos and soft diffusers
Accessory slot for motorized effects units or optional drop-in iris
Power and DMX In/Thru connectors for easy setup
Up to 6 spotlights in one line at 15 A via Power In/Thru connector possible
DMX512 In/Thru via 5-pin XLR connectors
Numerous control options, e.g. RGB, strobe as well as master-slave control without console
15-bit internal control for smooth dimming, soft fades and color fidelity during dimming
CE and IP20 certified

Technical data
Colour temperature: 4000 to 6500 K
Weight: 8,3kg (incl. aperture slider unit, without lens tube)
Dimensions: 43.4cm x 33.8cm x 63.1cm (length depending on tube)
Electrical data: 230V / 0.6A / 246W

compatible with the following lens types
PARTS NO. / DESCRIPTION
7460A2008 LED special 50° EDLT lens barrel, black
7060A2048 36° EDLT lens barrel, black
7060A2047 26° EDLT lens barrel, black
7060A2046 19° EDLT lens barrel, black
7060A2052-K 90° lens barrel, black
7060A2051-K 70° lens barrel, black
7060A2050-K 14° lens barrel, black
7060A2001-K 10° lens barrel, black
7060A2000-K 5° lens barrel, black
7060A2030-K 15°-30° zoom lens barrel, black 7060A2032-K 25°-50° zoom lens barrel, black

Optional bookable
Lens tubes
Fresnel adapter incl. door panels
LED CYC attachment

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=289&productgroup=6&productgroupmain=1

ETC Source 4 LED 2 LUSTR-BE

ETC

ETC's x7 Farbmischsystem™ combines up to seven LED colours to produce wonderful coloured light. The Source Four LED Series 2 Lustr® Array takes the idea even further by adding a lime green LED emitter. The lime green increases the lumen output especially in the white range and the softer colors. These are brighter and more vibrant and match the color tones of a conventional Source Four® fixture even better. The lime green also enhances color rendering by better combining the red and blue ends of the color spectrum. This means that the gaps in the spectrum can be closed even better and natural light can be produced.

More red is also added to the x7 color mixing system of the Source Four LED Series 2 Lustr Array. In conjunction with the lime green emitter, the additional red can produce amber, straw and pink tones up to 300% brighter than the original Source Four LED™. The deeper, richer colors of the Source Four LED Series 2 Lustr Array move - from sunset to moonlight and all dramatic scenes in between.

Series 2 LED basic housing with orifice slider unit, x7 colour mixing system
incl. power cord Schuko-Powercon
incl. gobo holder with Soft Focus diffuser
7461A125

Special properties
60 Luxeon® Rebel LED Emitters
20.000 hours LED life time
Inserts for glass and metal gobos and soft diffusers
Accessory slot for motorized effects units or optional drop-in iris
Power and DMX In/Thru connectors for easy setup
Up to 6 spotlights in one line at 15 A via Power In/Thru connector possible
DMX512 In/Thru via 5-pin XLR connectors
Numerous control options, e.g. RGB, strobe as well as master-slave control without console
15-bit internal control for smooth dimming, soft fades and color fidelity during dimming
CE and IP20 certified

compatible with the following lens types
PARTS NO. / DESCRIPTION
7460A2008 LED special 50° EDLT lens barrel, black
7060A2048 36° EDLT lens barrel, black
7060A2047 26° EDLT lens barrel, black
7060A2046 19° EDLT lens barrel, black
7060A2052-K 90° lens barrel, black
7060A2051-K 70° lens barrel, black
7060A2050-K 14° lens barrel, black
7060A2001-K 10° lens barrel, black
7060A2000-K 5° lens barrel, black
7060A2030-K 15°-30° zoom lens barrel, black
7060A2032-K 25°-50° zoom lens barrel, black

Optional bookable
Lens tubes
Fresnel adapter incl. door panels
LED CYC attachment

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=282&productgroup=6&productgroupmain=1

ETC Source 4 LED 2 Tungsten HD

ETC

Light that belongs on TV! The arrays for Tungsten HD are designed for TV studios and other applications where high-definition lighting is a must. Thanks to flicker-free operation - even at high speed - the Tungsten HD arrays look great on screen. The Tungsten HD has a variable warm white (2700 to 4500 K) that has the grace of incandescent light. Color temperatures and shades (pink and green tint) can be adjusted to make people look good to both the eye and the camera.

Special properties
60 Luxeon® Rebel LED Emitters
20.000 hours LED life time
Inserts for glass and metal gobos and soft diffusers
Accessory slot for motorized effects units or optional drop-in iris;
Power and DMX In/Thru connectors for easy setup
Up to 6 spotlights in one line at 15 A via Power In/Thru connector possible
DMX512 In/Thru via 5-pin XLR connectors
Numerous control options, e.g. RGB, strobe as well as master-slave control without console
15-bit internal control for smooth dimming, soft fades and color fidelity during dimming
CE and IP20 certified

Technical data
Colour temperature: 2700 - 4500 K
Weight: 8,3kg (incl. aperture slider unit, without lens tube)
Dimensions: 43.4cm x 33.8cm x 63.1cm (length depending on tube)
Electrical data: 230V / 0.6A / 246W

compatible with the following lens types
50° EDLT lens barrel
36° EDLT lens barrel
26° EDLT lens tube
19° EDLT lens barrel
90° lens tube
70° lens tube
14° lens tube
10° lens tube
5° lens tube
15°-30° zoom lens tube
25°-50° zoom lens tube

Optional bookable
Lens tubes
Fresnel adapter incl. door panels
LED CYC attachment

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=844&productgroup=6&productgroupmain=1

ELATION Sixbar 500

ELATION

The Sixbar 500 from ELATION is based on six multicolour LEDs with 6-colour equipment in the colours red, green, blue, white, amber and UV. The colour spectrum that can be displayed is therefore particularly wide and gives the user more flexibility in the realisation of his design. The 30° beam angle is ideal for homogeneous illumination of horizons. The frost filter included in the scope of delivery ensures excellent colour mixing directly at the light exit. The optionally mountable glare shield, which is also included in the scope of delivery, prevents a direct view into the optics.

Each of the six LEDs can be controlled separately to display colour gradients or moving light scenarios. Backlight applications or matrix inserts are also possible, the device is equipped accordingly. In addition to DMX 512-A with full RDM support, ArtNet and the advanced Kling-Net protocol are also available, making integration into media server systems such as ArKaos child's play. As with all ELATION LED products, variable dimmer curves as well as various macros and effects to support the user during programming are part of the basic equipment.

The Sixbar already offers an extensive range of standard equipment. The bracket allows both hanging and standing installation without any additional accessories. Magnets have been integrated on the sides of the housing to ensure that several units can be optimally aligned side by side. On the connection side powerCON inputs and outputs as well as XLR 3 and 5 pin are available. The ArtNet or Kling-Net protocol is connected via high-quality etherCON connectors with corresponding loop-through options.

Optical system
Optics fixed optical systemsRadiation angle30°

LED light sources
LEDs 6x multichip LEDs Colors6x red, 6x green, 6x blue, 6x amber, 6x white;
6x uvLifetime LEDs> 100,000 hoursColour mixingRGBAW+UV

Temperature ranges
Ambient temperature -15° / +45°C Cooling Convection cooling

Control & Programming
ProtocolDMX 512-A (RDM), ArtNet, Kling-NetDMX 512 channels6/7/11/13/18/36/39/43 (8 modes)
Internal memory
Stand alone programs Fixed colors, master/slave control Menu displayLCD 8 digits, 2 lines
DMX 512 connection
XLR 3 pol XLR 5 polArtNet connection2x RJ 45 etherCON

Technical data
Mains voltage 100-240 V 47-63 Hz
Current consumption0.4 A at 230 V

Casing
Material: Aluminium
Colour: black

Dimensions/weight
Dimensions (L x W x H)45 x 20.6 x 15.5 cm
Weight 3,7 kg
Mounting compact Y-brackets for hanging and standing mounting

Special features
RGBAW+UV under one lens
Extended colour spectrum thanks to additional white LED
UV wavelength 395 nm
Single pixel control
Color macros preprogrammed
Color programs preprogrammed
Stand Alone RGBAW+UV Programming
Memory for last operating status
Easy to use menu with LC display
Flicker-free LED control
Variable dimmer curves
Operating hours counter
Default Set Function
Display password magnets for seamless connection of multiple devices
No DMX Backup (Close, Hold, Auto Program)
Software update via DMX 512
Network input & output
powerCON input & output

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=806&productgroup=6&productgroupmain=1

ROBE Robin Spiider

ROBE

With the Robin Spiider, ROBE delivers one of the most powerful and innovative LED-based moving lights. The device is based on a combination of 18 RGBW multichip LEDs of the 30 Watt class and a 60 Watt RGBW COB LED in the center. Both units can be used separately or in combination and allow spectacular effects. All LEDs are separately controllable which also allows matrix effects.

Robin Spiider convinces both as a classic LED washlight with homogeneous colour mixing and a zoom range from 4 to 48 degrees, as well as a beam effect for creative "in air" shows. Thus the Spiider can be used universally in any environment. In order to offer optimal conditions for the creative scope, the device is equipped with PixelFX macros and a continuously rotatable flower effect.

Optical system
Fixed optical systems Beam angle / zoom 4°-48°, stepless, motorized

LED light sources
LEDs18x 30 W Multichip LEDs 1x 60 W COB LED
Colours 19x red
19x blue
19x green
19x white
Lifetime LEDs > 20,000 hours
Color mixing RGBW
Virtual colour wheel with 66 LEE, 12 BMFL and 10 user colours

Temperature ranges
Ambient temperature +45°C
Operating temperature +75°C
Cooling Fan, temperature controlled

Effects
Shutter/Strobe 1-20 flashes/sec (electronic)
Macros
Dimmer 0-100% linear, 8/16-bit virtual halogen dimmer curve

Control & Programming
Protocol DMX 512-A (RDM) ArtNet sACN MA Net MA Net2 Kling-Net
DMX 512 channels 90/49/33/27 (4 modes)
Internal memory 3 programmable sequences of 99 steps each
Test and demo programs
Master/slave control
Pan-Tilt control tracking and vector
Pan-Tilt Range Pan 540°, Tilt 300°, 8/16-Bit, Macros
Menu Display QVGA Touchscreen, blue backlit, battery buffered
DMX 512 connector XLR 3 pin XLR 5 pin
ArtNet connection 2x RJ 45 etherCON female (integrated 10/100 MBit switch)

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 2.6 A at 230 V

Dimensions/Weight
Dimensions (L x W x H) 47.7 x 39 x 28.6 cm
Weight 13 kg

Mounting points
2 pairs of recordings for 1⁄4 Rotation Quick Locks

Special features
Single pixel control
Preprogrammed PixelFX Macros
Flower effect, infinitely variable, forward/backward
selectable theatre mode (reduced pan/tilt, zoom speed and adaptive fan control)
CTC Macro Channel
Virtual colour wheel with 66 LEE, 12 BMFL and 10 user colours
Halogen light emulation (2,700 K & 3,200 K)
Internal, high-resolution 18 bit LED dimming
Various blackout modes
Pan/Tilt Speed channel
Strobe, RGB macros 16 bit channels for pan/tilt, dimmer, RGBW, zoom
Automatic position correction
Remote DMX reset, partial
DMX analyzer
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
Fan, in zones, temperature controlled
Internal ArtNet to DMX converter
Integrated 10/100 Mbit 2-port switch
ArKaos Kling-Net Protocol
Software update via DMX 512
Operating hours counter
NEUTRIK powerCON True1 input
Optional LumenRadio CRMX Wireless DMX

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=346&productgroup=5&productgroupmain=1

ROBE Robin Pointe Beam

ROBE

The Robin Pointe (spoken point) is the new, extremely dynamic moving light from ROBE. With this device the user receives a beam and spot at the same time, which can also be used as a wash thanks to its optical system. The Pointe is characterized by its super-bright, parallel beam that is sharply focused over its entire length. In addition, it offers a multitude of features that make it a unique and versatile device. These include a 5 to 20° stepless and ultra-fast zoom, focus, two separate prism effects, a rotating and a static gobo wheel. Unlike typical beam lamps, the Pointe has excellent image quality with gobos, making it a real spot and therefore more than just an effect light. Like all devices of the current ROBE Robin family, the Robin Pointe is optionally available with CRMX Nova Wireless DMX (RDM) technology from LumenRadio.

Optical system
Lamp OSRAM Sirius HRI 280 W base FaP2,5
Optics Ellipsoidal
Beam angle/zoom 2.5°-10° continuous, motorized (beam mode)
5°-20° stepless, motorized (spot mode)
Focus infinitely variable, motorized

Colors
Color mixing system no
Color wheel 1 13 colors plus open 8/16-bit
Color correction filter no
Rainbow effect infinitely variable, forward/backward

Gobos
Gobo wheel 1 9 gobos plus open (15.8 mm), slot & lock indexable, rotatable, shakeable 8/16-bit
Gobo wheel 2 14 gobos plus open (15.8 mm)
Animation Wheel no

effects
Iris no
Frost stepless, motorized, 8-bit
Macros Prism 6-fold prism (linear) & 8-fold prism (circular), rotatable, 8-bit
Shutter/Strobe 1-15 flashes/sec (mechanical), macros 7-33 flashes/sec. (electronic) Dimmer 0-100% linear, 8/16-Bit
HotSpot Control no
Fan/noise control no

Control & Programming
Protocol USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2
DMX 512 channels 16/23 (2 modes)
Internal memory 3 sequences of 99 steps each, music trigger test and demo programs, master/slave control
Pan/Tilt control tracking and vector
Pan/Tilt Range Pan 540°, Tilt 270°, 16-Bit
Menu Display QVGA touch screen, blue backlit Battery buffered
DMX 512 connector XLR 3 pin XLR 5 pin
ArtNet connection RJ 45 EtherCon female

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption approx. 2.0 A at 230 V
Electronic ballast unit

dimensions/weight
Dimensions (L x W x H) 57.5 x 36.4 x 25.0 cm (head horizontal)
Weight 15 kg

mounting
2 pairs of 1⁄4 Rotation Quick Locks

Special features
Various blackout modes
Pan/Tilt Speed channel
Strobe, Prisms, Frost Macros
16 bit channels for Pan/Tilt, Dimmer, Color, Gobo 1, Zoom, Focus
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
New RNS2 (ROBE Navigation System 2) with QVGA touchscreen
Battery buffered RNS 2
Gravity sensor for automatic display rotation Service
Logbook with real time clock for logging of operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Slot & Lock quick change frame for gobos & colours
Pan-/Tilt Transport Lock
Fan, in zones, temperature controlled
Automatic >Power Factor Correction

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=707&productgroup=5&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

ELATION KL Fresnel 8 P.O. WW

ELATION

With the KL series, ELATION Professional introduces ten high-quality LED-based stepped lenses. The abbreviation KL stands for Key Light, because the Fresnel headlights - equipped with a high-quality LED engine - with a stable colour temperature of either 3,000 or 5,600 Kelvin and a colour rendering index of up to 97 combine all the qualities of guiding light.

The ten models are available in the 50, 150 and 350 watt power classes and have comparable professional features, such as the infinitely variable zoom in the range of around 11-57° (varies depending on the model). The zoom range can be set manually on the device for the KL Fresnel 4" and KL Fresnel 6" models. The model KL Fresnel 8" has a motorized zoom, which can be set either via DMX 512-A from the console or manually by means of a potentiometer on the device. ELATION offers a pole-operated version with KL Fresnel 6" P.O. and KL Fresnel 8" P.O. with which, in addition to the infinitely variable zoom, pan and tilt can also be set using a pole.

The professional claim of the KL series is underlined by an absolutely homogeneous 16-bit dimming. Optionally the user can adjust dimmer mode, dimmer curve and dimmer delay depending on the application. In addition, the frequency of the pulse width modulation is freely selectable, so that all devices of the KL series can be optionally matched with TV cameras.

All devices have XLR 5 pin connectors for the DMX signal, the variants KL Fresnel 6 and KL Fresnel 8 additionally have XLR 3 pin connectors. Power is supplied flexibly via powerCON True1 on the input and output side. All settings can be made on the LC display via the practical menu navigation.

A door panel with 8 leaves and a colour filter frame are included in the scope of delivery for all eight models.

Optical system
Optics Fresnel
Beam angle 11°-57°, infinitely variable

LED light sources
LEDs 1x 350 W COB LED, CRI 97+
Colours warm white
Lifetime LEDs 50,000 hours
Colour mixture warm white (3.000 K)

Temperature ranges
Ambient temperature-10°/+45° C
Cooling Fan, temperature controlled

Effects
Shutter/Strobe 1-18 flashes/sec (electronic), macros
Dimmer 0-100% linear, 8/16-Bit
Dimmer curves (Standard, Stage, Stage 2, TV, Architectural, Theater)

Control & Programming
Protocol DMX 512-A (RDM)
DMX 512 channels 1/2/3/4/5 (5 modes)
Internal memory Stand Alone WW Programming
Menu display LCD 8-digit, 2 lines
DMX 512 -connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 1.5 A at 230 V

Casing
Material aluminium die-cast
Colour black

Dimensions/weight
Dimensions (L x W x H) 41 x 32.6 x 45.6 cm
Weight 17,2 kg
Mounting Mounting bracket with TV spigot

Special features
Stand Alone WW Programming
Manual adjustment of brightness via jog wheel
Memory for last operating status
Easy to use menu with LC display
Selectable dimmer mode
Selectable dimmer curves
Selectable dimmer delay
Selectable PWM frequency (900-25,000 Hz)
16-bit channels for dimmer
Operating hours counter
Default Set Function
Display Password
No DMX Backup (Blackout, Hold)
Software update via DMX 512/USB
powerCON True1 Input & Output

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1423&productgroup=6&productgroupmain=1

ELATION KL Fresnel 6 P.O. WW

ELATION

With the KL series, ELATION Professional introduces ten high-quality LED-based stepped lenses. The abbreviation KL stands for Key Light, because the Fresnel headlights - equipped with a high-quality LED engine - with a stable colour temperature of either 3,000 or 5,600 Kelvin and a colour rendering index of up to 97 combine all the qualities of guiding light.

The ten models are available in the 50, 150 and 350 watt power classes and have comparable professional features, such as the infinitely variable zoom in the range of around 11-57° (varies depending on the model). The zoom range can be set manually on the device for the KL Fresnel 4" and KL Fresnel 6" models. The model KL Fresnel 8" has a motorized zoom, which can be set either via DMX 512-A from the console or manually by means of a potentiometer on the device. ELATION offers a pole-operated version with KL Fresnel 6" P.O. and KL Fresnel 8" P.O. with which, in addition to the infinitely variable zoom, pan and tilt can also be set using a pole.

The professional claim of the KL series is underlined by an absolutely homogeneous 16-bit dimming. Optionally the user can adjust dimmer mode, dimmer curve and dimmer delay depending on the application. In addition, the frequency of the pulse width modulation is freely selectable, so that all devices of the KL series can be optionally matched with TV cameras.

All devices have XLR 5 pin connectors for the DMX signal, the variants KL Fresnel 6 and KL Fresnel 8 additionally have XLR 3 pin connectors. Power is supplied flexibly via powerCON True1 on the input and output side. All settings can be made on the LC display via the practical menu navigation.

A door panel with 8 leaves and a colour filter frame are included in the scope of delivery for all eight models.

Optical system
Optics Fresnel
Beam angle 15°-38°, infinitely variable

LED light sources
LEDs 1x 150 W COB LED, CRI 97+
Colours warm white
Lifetime LEDs 50,000 hours
Colour mixture warm white (3.000 K)

Temperature ranges
Ambient temperature -10°/+45° C
Cooling Fan, temperature controlled

Effects
Shutter/Strobe 1-18 flashes/sec (electronic), macros
Dimmer 0-100% linear, 8/16-Bit
Dimmer curves (Standard, Stage, Stage 2, TV, Architectural, Theater)

Control & Programming
Protocol DMX 512-A (RDM)
DMX 512 channels 1/2/3/4/5 (5 modes)
Internal memory Stand Alone CW programming
Menu display LCD 8-digit, 2 lines
DMX 512 -connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.7 A at 230 V

Dimensions/weight
Dimensions (L x W x H )34,4 x 27,2 x 39,8 cm
Weight 11,6 kg
Mounting Mounting bracket with TV spigot

Special features
Stand Alone WW Programming
Manual adjustment of brightness via jog wheel
Memory for last operating status
Easy to use menu with LC display
Selectable dimmer mode
Selectable dimmer curves
Selectable dimmer delay
Selectable PWM frequency (900-25,000 Hz)
16-bit channels for dimmer
Operating hours counter
Default Set Function
Display Password
No DMX Backup (Blackout, Hold)
Software update via DMX 512/USB
powerCON True1 Input & Output

Accessories included
Door trim 8-leaf, rotatable
Colour filter frame
powerCON True1 connection cable

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1412&productgroup=6&productgroupmain=1

ELATION KL Fresnel 4 WW

ELATION

With the KL series, ELATION Professional introduces ten high-quality LED-based stepped lenses. The abbreviation KL stands for Key Light, because the Fresnel headlights - equipped with a high-quality LED engine - with a stable colour temperature of either 3,000 or 5,600 Kelvin and a colour rendering index of up to 97 combine all the qualities of guiding light.

The ten models are available in the 50, 150 and 350 watt power classes and have comparable professional features, such as the infinitely variable zoom in the range of around 11-57° (varies depending on the model). The zoom range can be set manually on the device for the KL Fresnel 4" and KL Fresnel 6" models. The model KL Fresnel 8" has a motorized zoom, which can be set either via DMX 512-A from the console or manually by means of a potentiometer on the device. ELATION offers a pole-operated version with KL Fresnel 6" P.O. and KL Fresnel 8" P.O. with which, in addition to the infinitely variable zoom, pan and tilt can also be adjusted using a pole.

The professional claim of the KL series is underlined by an absolutely homogeneous 16-bit dimming. Optionally, the user can adjust dimmer mode, dimmer curve and dimmer delay according to the intended use. In addition, the frequency of the pulse width modulation is freely selectable, so that all devices of the KL series can be optionally matched with TV cameras.

All devices have XLR 5 pin connectors for the DMX signal, the variants KL Fresnel 6 and KL Fresnel 8 additionally have XLR 3 pin connectors. Power is supplied flexibly via powerCON True1 on the input and output side. All settings can be made on the LC display via the practical menu navigation.

A door panel with 8 leaves and a colour filter frame are included in the scope of delivery for all eight models.

Optical system
Optics Fresnel
Beam angle 14°-30°, infinitely variable

LED light sources
LEDs 1x 50 W COB LED, CRI 97+colours warm white
Lifetime LEDs 50,000 hours
Colour mixture warm white (3.000 K)

Temperature ranges
Ambient temperature -10°/+45° C
Cooling Fan, temperature controlled

Effects
Shutter/Strobe 1-18 flashes/sec (electronic)
Macros Dimmer0-100% linear, 8/16-Bit
Dimmer curves (Standard, Stage, Stage 2, TV, Architectural, Theater)

Control & Programming
Protocol DMX 512-A (RDM)
DMX 512 channels 1/2/3/4/5 (5 modes)
Internal memory Stand Alone WW Programming
Menu display LCD 8-digit, 2 lines
DMX 512 -connector XLR 5 pol

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 0.3 A at 230 V

Dimensions/weight
Dimensions (L x W x H )27,2 x 20,8 x 30,3 cm
Weight 5,0 kg
Mounting Mounting bracket with hole

Special features
Stand Alone WW Programming
Manual adjustment of brightness via jog wheel
Memory for last operating status
Easy to use menu with LC display
Selectable dimmer mode
Selectable dimmer curves
Selectable dimmer delay
Selectable PWM frequency (900-25,000 Hz)
16-bit channels for dimmer
Operating hours counter
Default Set Function
Display Password
No DMX Backup (Blackout, Hold)
Software update via DMX 512/USB
powerCON True1 Input & Output

Accessories included
Door trim 8-leaf, rotatable
Colour filter frame
powerCON True1 connection cable

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1411&productgroup=6&productgroupmain=1

ROBE Robin Esprite

ROBE

The new, intelligent LED headlamp Esprite™ has a low-cost LED white light source that can be quickly changed or replaced. ROBE thus offers "THE solution" to the biggest problem of white LED engines, their massive and unstoppable changes in colour temperature and brightness during their service life. The ROBE Esprite™ is the uncompromising replacement for ageing 1000 W and 1200 W discharge lamp headlamps. It impresses with 27,000 lumen light output and generates a powerful 85,000 lux at 5m. The precision optics known from ROBE, which produce crystal clear, white light, also contribute to this.

Light source
Light source type: TE™ 650W replaceable white light LED engine
Life expectancy of the LED: min. 20,000 hours
CRI: 70/80/90, selectable via DMX
Color temperature: 6,700K

OPTICAL SYSTEM
Robe's proprietary optical design
Highly efficient optical zoom system, ratio 9:1
Zoom range: 5.5° - 50°
diameter of the exit lens: 150 mm
Optics made of highly efficient components
Light output in lumen: up to 27,000 lm
Brightness: 85.000 lx @ 5m

DYNAMIC EFFECTS
Cyan: 0 - 100%
Magenta: 0 - 100%
Yellow: 0 - 100%
Variable color temperature (CTO): 3,000K - 6,700K
Color wheel 1: 5 solid dichroic colors + white
Color wheel 2: 5 solid dichroic colors + white
Orifice slider module: 4 individually positionable sliders plus positioning of the entire module +/-60° (patented)
Rotatable gobo wheel: 7 rotatable, indexable and interchangeable breakup and aerial gobos + open, patented "SLOT&LOCK" system
Static gobo wheel: 9 static and exchangeable gobos + open
Animation wheel: made of aluminium, for single use or in combination with gobos, rotatable in both directions with variable speed
Prism: 6-fold prism, rotatable in both directions with variable speed
Iris: motorized, stepless, pulse effects up to 3 Hz Frost: light 1° frost for soft focus of the gobo projection or the iris sliders and a medium 5° frost for a uniform wash hot-spot function: from a homogeneous beam to a hot-spot beam with a ratio of 6: 1 changeable Motorized zoom and focus Electronic strobe effect with variable speed up to 20 Hz High resolution electronic dimming: 0 - 100% L3™ (Low Light Linearity) - 18 bit dimming without noticeable steps for ultra-fine dimming up to blackout Cpulse™: Pulse Width Modulation (PWM) control for flicker-free light, for example for HD and UHD cameras; ready for 8K and 16K

CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe Touchscreen with battery buffer, gravity sensor for automatic screen alignment
Operating memory Service log with RTC
Stand-alone operation with 3 editable programs (with up to 100 steps each)
Integrated error analysis for fast error detection
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN
CRMX™ wireless technology from Lumen Radio (optional)
DMX protocol modes: 2 Number of control channels: 49, 42
Pan/Tilt: resolution 16 Bit
CMY color mixing & variable CTO: resolution 8 bit
Color wheel positioning: resolution 8 or 16 bit
Aperture slider module motion & rotation: resolution 8 bit
Positioning rotatable gobo wheel: Resolution 8 Bit
Gobo indexing & rotation: resolution 8 or 16 bit
Positioning static gobo wheel: Resolution 8 Bit
Animation wheel: resolution 8 Bit
Rotation animation wheel: resolution 8 Bit
Iris: resolution 8 or 16 bit
Frost: Resolution 8 Bit
Zoom: resolution 8 or 16 bit
Focus: Resolution 8 or 16 bit
Dimmer: Resolution 8 or 16 bit (internal 18 bit)

MOVEMENT
Pan movement: 540°
Tilt movement: 265°
Motion control: standard and reduced speed
EMS™: Electronic Stabilizer System for Pan & Tilt to reduce light beam deviations caused by crosshead movement or vibration
Automatic Pan/Tilt position correction

ROTATABLE GOBOS
7x rotatable glass gobos
Outer diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Maximum thickness: 4 mm
High temperature borofloat or better glass

STATIC GOBOS
9x static glass gobos
Outside diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Max. thickness: 3.5 mm
Heat resistant borofloat or better glass

EFFECTRADE
Single animation wheel
Material: Aluminium
Can be used individually or in combination with the rotating gobos
Rotatable in both directions with variable speed

FRAMING SHUTTER SYSTEM
Blades: 4 blades, each individually movable in its position and rotation
Movement: stepless with variable speed
Stepless and very precise movement of the framing shutter system
Rotation: +/- 60° of the complete orifice plate module

THERMAL SPECIFICATIONS
Maximum ambient temperature: 45°C (113°F)
Maximum case temperature: 75°C (167°F)
Minimum operating temperature: -5°C (23°F)

ELECTRICAL SPECIFICATIONS AND CONNECTORS
Power supply: Electronic with automatic range selection
Supply voltage: 100-240V, 50/60 Hz
Power consumption: Standard mode: Max. 870W at 230 V / 50 Hz
High-Power-Mode: Max. 950W at 230 V / 50 Hz
Power connector: Neutrik powerCON TRUE1 in
DMX and RDM data: lockable 3-pin & 5-pin XLR in/out
Network interface: RJ45 in

RELEASES
CE conformity
cETLus match

MECHANICAL SPECIFICATIONS
Height: 733 mm (28.6") - head in vertical position
Width: 443 mm (17.4")
Depth: 264 mm (10.4") - head in vertical position
Weight: 27.8 kg (61.3 lbs) IP protection class: IP20

EFFECTS Effects:
Static and rotating gobo wheel, animation wheel, aperture slider, prism

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1509&productgroup=5&productgroupmain=1

ELATION Fuze Par Z60 IP

ELATION

The IP 65 classified Fuze Par Z120 IP is a PAR spotlight for quiet operation with a 120 Watt RGBW COB LED.
The equipment includes a motorized zoom from 7° to 55°, RGBW color mixing, electronic stroboscope and selectable dimmer curves, DMX 512-A, IP classified XLR 5 pin as well as powerCON TRUE1 inputs and outputs, LC display and 4-button control panel, Y-bracket for mounting on the truss or on the floor without further accessories, flicker-free operation for TV and film and a universal switch mode power supply (110-240 Volt).
Colour filter frame and door panel are included in the scope of delivery.

Features
1x 120 W COB LED
Beam angle 7°-55°, stepless, motorized
Protection class IP 65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=817&productgroup=6&productgroupmain=1

ELATION DTW Bar 1000

ELATION

The DTW Bar 1000 has twelve 10 Watt CW/WW/A multichip LEDs with a 28° beam angle. The color temperature is infinitely variable in the range of 1,800-6,500 Kelvin.
DTW stands for "Dim To Warm" and describes a feature that adjusts the colour temperature when dimming, as known from halogen lamps. The colour temperature of the DTW function can be infinitely adjusted by the user between 1,800 and 3,200 Kelvin.
The equipment includes a single pixel control, variable dimmer curves, stroboscope and chase effects, DMX 512-A (RDM), ArtNet and Kling-Net, XLR 3/5 pin, etherCON and powerCON inputs and outputs, LC display with 4-button control panel, Y-bracket for mounting on the truss or on the floor without further accessories, robust die-cast aluminium housing, flicker-free operation for TV and film and a universal switch-mode power supply (110-240 V).

Features
LED multichip 12x 10 W
Smartwhite colour mixture 1.800-6.500 K
"DTW - Dim To Warm" function - 1800-3200 K

Optional
Glare protection wings and frost filter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=807&productgroup=6&productgroupmain=1

CLAY PAKY Shar Bar

CLAY PAKY

Special properties
LED-Bar with 6 single beams
Beams can be aligned individually via mirror
Individually controllable LEDs
240° motorized tilt
2.500K to 8.000K
2° Beam angle

Technical data
Operating voltage/supply voltage: 100/240V 50/60Hz
Colour temperature: 2.500-8.000K
IP classification: IP20
Power of the illuminant: 6 x 30W
Beam angle/zoom 2°
Connectors input side powerCON, XLR-5, etherCON
Connectors output side powerCON, XLR-5, etherCON
Color: black
Weight: 19,60kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=397&productgroup=6&productgroupmain=1

AYRTON IntelliPix-XT

AYRTON

INTELLIPIX™XT is the consistent further development of INTELLIPIX™R. The beam angle of 2° and the powerful RGBW COB-LED penetrate with the quality beam into previously unknown dimensions. The new, highly efficient 126mm optic is the world's largest collimator with a previously unattained efficiency of 580 candela per lumen.
The result is an intense and precise beam of only 2° with an efficiency of over 85%. This optical masterpiece is the basis of the new "XT" product line.
In addition, there is a new generation of power supply with an efficiency of over 95%. This allows the INTELLIPIX™XT to shine continuously without losing brightness. With exactly fitting docking tools the lights can be placed exactly next to each other to create a 3D volume effect.
With the mounting bracket, any other individual mounting that the set design requires is also possible. On stage as well as in the architainment this extraordinary lamp not only provides light curtains, but also makes the light spatial.

Special properties
2° Beam angle
Maximum light output - minimum housing
9x High-Power RGBW LEDs
High efficiency 126mm PMMA collimator
9,000 lumen
5,220,000 candela
Homogeneous colour mixing
High colour quality
Flicker-free for HD-TV
Color & pattern effects with variable speed
European Engineering

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=330&productgroup=6&productgroupmain=1

AYRTON IntelliPix-R

AYRTON

The Ayrton IntelliPix-R is an extremely powerful, semi-transparent video/effect display for indoor and outdoor use. It convinces with the many advantages of the Ayrton "R" series, in handling it also has a well thought-out connection system, which even allows the quick assembly of a large number of panels in different configurations. Special properties
Maximum light output - minimum housing
15W Osram Ostar RGBW LEDs of highest quality
67mm optics with high optical efficiency
4,5° Beam angle
High colour quality
Flicker-free
IP65
Wide range of control options
European Engineering

OPTICS
67mm PMMA optics
4,5° Beam angle
High optical efficiency (85%)

LIGHT SOURCE
25x 15W RGBW Multi-Chip LED (individually controllable)
10.500 lm Light output
1.250.000 cd Luminous flux
flicker-free, especially for HD TV

COLORS
RGBW, with high Ri value
Uniform light beam, homogeneous colour mixing, no colour shadows;
Saturated colours incl. many pastel shades
Virtual color wheel, incl. the most common white shades
Dynamic color effect macros with variable speed

DIMMER / STROBE
Dimmer from 0-100% without colour change
Strobe effect with 1-25 flashes/sec

SOFTWARE PROPERTIES
Local DMX addressing possible
Large number of built-in effects with adjustable speed and fade;
Clear menu control

HARDWARE PROPERTIES
Convection cooling
Built-in temperature sensor
Sophisticated connection system for mounting the panels in 4 directions;
IP65

CONTROL
DMX 512, only via ArtNet
Stand-alone and master/slave modes
Built-in graphic display with 6 control buttons
Artnet and KlingNet protocol via two RJ45 IP65 connectors
DMX modes (from 16 to 109 DMX channels)

POWER SUPPLY
Electronic universal power supply with reactive current compensation
Operating voltage/ supply voltage: 110 - 240 Volt - 50/60Hz
Power consumption: 375W, max.
Mains connection: IP65 PowerCON TRUE1 in/out

COLOR CASING
black

DIMENSIONS
Device: 500 x 119 x 500 mm (LxHxW)
Flightcase Foam: 560 x 180 x 560 mm (LxHxW)

WEIGHT
15.9 KG (without packaging)

ACCESSORIES OPTIONAL
024580 INTELLIPIX-R RINGING RING
024581 INTELLIPIX-R HANGING BRACKET
024585 INTELLIPIX-R FLOOR INSTALLATION KIT
024589 INTELLIPIX-R FLOOR INSTALLATION KIT SET-UP TOOL
074720 EASYBOX ETHERNET CAT.5 TO CAT.6
076165 1.5 MTR POWER CABLE WITH POWERCON TRUE ONE - IP44
076225 1 MTR LINK CABLE WITH POWERCON TRUE ONE - IP65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=245&productgroup=6&productgroupmain=1

ASTERA Titan Tube

ASTERA

The new Titan Tube was developed especially for film and television lighting. It has been optimized for a very high TLCI and also offers a high CRI and an enormous brightness.

It offers an easier application without AsteraApp, because brightness and color temperature can be adjusted directly on the Titanium Tube. Furthermore, a large number of Titan tubes can be efficiently wired with power and data.

Optical
LED Chips: Red, Green, Blue, Mint, Amber
Power (before calibration): 72W
Power (after calibration): 48W
TLCI: ≥96
CRI: ≥96
luminous flux: 2900 Lm
Illuminance @1m: 785Lx
Strobe: 0-25Hz
Beam angle (beam): 120˚
Beam angle (field): 180˚
Pixel: 16

Electric
Battery: LG Chem Lithium-ion
Battery life: 70% after 300 charging cycles
Battery life: up to 20 hours
LED service life: 50,000 hours
Charging time (nominal): 2 hours
Input voltage (charger): 100~240 V| 50~60 Hz
Input voltage (lamp): 24 V, 2 A

Control
Display with multifunction keys
infrared
Radio module: 865 - 870 MHz | 902 - 928 MHz | 2.4 GHz
Range (radio module and radio DMX): 300 m
DMX: Wireless DMX and wired DMX

Mechanical
Housing: Polycarbonate with metal end cap
IP protection class: IP65
Relative humidity: 0~100%
Operating temperature: 0~40°C
Weight: 1.4 kg
Dimensions: Ø42 x 1035 (mm)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=837&productgroup=6&productgroupmain=1

ASTERA AX10 SpotMax, battery lamp

ASTERA

The SpotMax™ is the result of years of research and represents Astera's next generation of wireless lighting. Amber LEDs provide additional color saturation and together with the TruColor calibration, colors can be reproduced in detail and consistently.

Technical specifications
Light sources: 9 x RGBAW Philips LEDs
Luminous flux: 3,350 lm at 4000K white
Illuminance: 10,350 lx at 4000K White
CRI: 92 at 3000K White
Beam angle: 13°
Radio module: 868MHz receiver with up to 300m range
DMX: W-DMX with LumenRadio CRMX Wireless DMX
Housing: IP65 metal housing
Dimensions: L279mm x H296mm x W253mm
Weight: 7.98kg
IP protection class: IP65
Scope of delivery: Powercon power cable, 32° diffusor screen, 17°x46° elliptical diffusor screen
Also available: charging case (for 4 AX10), charging case (for 4 AX10), super bolts

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=338&productgroup=6&productgroupmain=1

ASTERA AX3 Lightdrop, battery lamp

ASTERA

The Lightdrop™ is Astera's best-selling rechargeable lamp and can be used in many ways, both as a spotlight and in luminous objects. It is extremely compact yet offers enormous brightness, long battery life and a long range.

Technical specifications
Product code: AX3-CRMX Light Output:15W (1 x RGBW CREE LED Chip)
Luminous flux: 390 lm at 6500K White
Illuminance: 1.300 lx at 6500K White
Beam angle: 13°
Operating time: 5-20 hours
Radio modules: 868MHz receiver 2.4GHz receiver
Range: 300m (330yds)
DMX: CRMX radio DMX by LumenRadio Also supports W-DMX
IP protection class: IP65
Weight: 0.679kg (1.49 lbs)
Dimensions: L117mm x H59mm x W108mm - L4.6" x H2.3" x W4.2"
Features: TruColor™ Calibration, temperature compensation, dynamic power-boost;

Scope of delivery
Battery charger
Spreading dome
Hangers, hangers
Rubber feet (x4)
Rubber cork
30° + 120° diffuser disc

Optionally available
17°x46° Elliptical diffuser disc
Dome

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=339&productgroup=6&productgroupmain=1

ASTERA AX5 Lightspot, battery lamp

ASTERA

Battery lamp 45W RGBAW ( 3x 15W ), beam angle 13°, IP65 aluminium housing, W-DMX with LumenRadio CRMX-Wireless DMX, In/ Out

Optical br> LED Chips: RGBAW
Light output: 45W
luminous flux: 1080 lm
Illuminance: 4800 lx @ 2m
CRI: 92
Strobo frequency: 0-25 Hz
Beam angle: 13°
Pixel: 1

Electric
Battery: LG Lithium-Ion
Battery life: 70% after 300 runs
Battery life: up to 20 hours
LED Lifetime: 50000 Hours
Charging time (nominal): 5 Hours
Input voltage: 90-260V 50-60Hz

Control br> Radio module: 865-870 MHz | 902-928 MHz | 2.4 GHz
Range: 300 m
DMX: CRMX, W-DMX and 5-pin XLR in & out

Mechanicalbr> Housing: Aluminium with plastic protection ring
IP protection class: IP65
Relative humidity: 0-100%
Operating temperature: 0-40°C
Weight: 3,40 kg
Dimensions: 145 x 190 x 221 (mm)

Powercon TRUE1
incl. flood lens DDSK 30°
incl. WWDSK Wallwash lens 13° x46°
incl. removable bracket
incl. Manfrottoclamp 035
incl. Mini TV spigot 191
incl. safety with karabiner emergency link 4mm 0,6m 30kg
incl. chain emergency link WLL 140kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=801&productgroup=6&productgroupmain=1

ASTERA AX1 Pixeltube

ASTERA

The AX1 is an IP65 waterproof, pixel controllable and decorative LED RGBW light tube that can be mounted on trusses, tables, etc. or placed with its floor stand. A highly creative luminaire that offers endless possibilities.

Optical
LED Chips: RGBW
Light output: 28W
luminous flux: 695 Lm
CRI: up to 88
Strobo frequency: 0-25 Hz
Beam angle: 180°
Pixel: 16

Electric
Battery: LG Chem Lithium-ion
Battery life: 70% after 300 charging cycles
Battery life: up to 20 hours
LED service life: 50,000 hours
Charging time (nominal): 5 hours
Input voltage (charger): 90~264 V| 47~63 Hz
Input voltage (lamp): 48 V, 0.5 A

Control
Radio module: 865 - 870 MHz | 902 - 928 MHz | 2.4 GHz
Range: 300 m Wireless DMX: supports CRMX and W-DMX

Mechanical
Housing: Polycarbonate metal end cap
IP protection class: IP65
Relative humidity: 0~100%
Operating temperature: 0~40°C
Weight: 1 kg
Dimensions: Ø42 x 1035 (mm)

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=815&productgroup=6&productgroupmain=1

SHOWTEC Airdomes ø 63cm

SHOWTEC

The Showtec Outdoor Dome allows you to use your moving head outside. Due to the waterproof hood the Outdoor Dome is independent of the weather conditions. The device is protected against rain, snow and dirt. Due to the continuous air circulation the Showtec Outdoor Dome has an additional cooling system.

Specifications
For floor and beam mounting (*ONLY for standing operation ! (NOT FOR HANGING OR VERTICAL MOUNTING !!!)
Black color
Incl. air pressure safety switch
Power supply 230V/50Hz
diameter: Ø 630 mm

Accessories optional
Airdome cover ø 63cm for Showtec height 60cm
Airdome cover ø 63cm for Showtec height 120cm
Airdome cover ø 63cm for Showtec height 150cm
Bracket for mounting moving heads

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=202&productgroup=5&productgroupmain=1

SGM G4

SGM

The G4 is available as wash or wash-beam, depending on the lens kit.

SGM Wash Lens Kit for G4 - Wash Lens Kit, zoom range 9°-76° degrees

G-4 wash Moving Head

150W high power light source with 5 colours (red, green, blue, amber, mint)
CRI > 90 (typical 93)
Very fast tilt and endless rotation
Fanless, very low power consumption
SGM color calibration
Only 10 Kg weightbr
Weatherproof, dustproof, maintenance-free, protection class IP65
endless rotation Pan, 220° Tilt
Housing colour black

SGM Wash-Beam Lens Kit for G4 - Zoom range 4.8°-34° degrees

G-4 Wash-Beam Moving Head
150W high power light source with 5 colours (red, green, blue, amber, mint)
CRI > 90 (typical 93)
Dichromatic Congo Blue & Deep Red Filter
Narrow beam 4.8°
Very fast tilt and endless rotation
Very low noise, temperature controlled fan
SGM color calibration
Only 10 Kg weight
Weatherproof, dustproof, maintenance-free, protection class IP65
Endless rotation Pan, 220° Tilt
Housing colour black

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=344&productgroup=5&productgroupmain=1

ROBE Robin BMFL WashBeam

ROBE

The BMFL WashBeam is, as the name suggests, both a washlight and a beamlight and can therefore be used very flexibly. In beam mode, spectacular beams and in-air effects can be created, which are infinitely adjustable in a range of five to 45 degrees. In wash mode the zoom range is from 7.5 to 56 degrees, depending on the frost filter used.

Like all units in ROBE's most powerful series, the BMFL WashBeam is based on a 1,700 Watt discharge lamp developed by OSRAM especially for ROBE, which can also be operated with either 1,500 or 1,200 Watt at a constant CRI.

The rich equipment of this device includes, among other things, a homogeneously mixing colour mixing system, two colour wheels for saturated colours typically used in TV, an iris slider unit, a gobo wheel with rotating and positionable placement, iris and an animation wheel. The dimmer/shutter unit, which can also be used in combination, is particularly impressive in the critical range at around ten percent power.

Optical system
Bulb HTI 1.700 W/60/P28 Lok-it!, 6.000°K
Socket PGJ28 Lok-it!
Optics Plankonvex
Beam angle/zoom 5°-45° continuous, motorized (beam mode)
7,5°-48° stepless, motorized (Wash Mode - Havy Frost 10°)
12°-52° stepless, motor-driven (Wash Mode - Havy Frost 20°)
14°-56° stepless, motor-driven (Wash Mode - Havy Frost 30°)

Colours
Colour mixing system CMY plus CTO, macros
Color wheel 1 6 colors plus open, without bars, 8/16-Bit
Color wheel 2 6 colors plus open, Slot & Lock without bars, 8/16-Bit
Color correction filter 6.000°K to 2.700°K stepless
Rainbow effect infinitely variable, forward/backward

Gobos
Gobo wheel 1 6 gobos plus open (30.8 mm), slot & lock
indexable, rotatable, shakeable 8/16-Bit
Animation Wheel yes (aluminium)
BeamShaper/aperture slider 4 internal aperture sliders, rotatable, system rotatable +/-45°, motorized, 8-bit, macros

Effects
Iris stepless, motorized, macros, 8/16-Bit
Frost Frost 20°, stepless, motorized, 8-bit, macros (10°; 30° optional)
Shutter/Strobe 1-15 flashes/sec (mechanical), macros 7-33 flashes/sec. (electronic)
Dimmer 0-100% linear, 8/16-Bit

Control & Programming
Protocol DMX 512-A (RDM), ArtNet, MA Net, Ma-Net 2, sACN
DMX 512 channels 41/48 (2 modes)
Internal memory 3 sequences of 99 steps each, music trigger test and demo programs, master/slave control
Pan/Tilt control tracking and vector
Pan/Tilt Range Pan 540°, Tilt 270°, 16-Bit
Menu Display QVGA Touchscreen, blue backlit, battery buffered
DMX 512 connector XLR 3 pin + XLR 5 pin
ArtNet connection RJ 45 EtherCon female

Technical data
Mains voltage 200-240 V 50/60 Hz
Current consumption approx. 8.7/7.9/6.6 A at 230 V
. Ballast electronic
Dimensions (L x W x H) 62.9 x 48.2 x 62.9 cm (head horizontal)
Weight 38,4 kg

Special features
Various blackout modes
Pan/Tilt Speed Channel Strobe, CMY, Iris, Effect & Frost macros
16 bit channels for Pan/Tilt, Dimmer, Gobo, Iris, Focus
High, constant CRI of 92
Selectable dimmer curve Linear/Square
EMS - Pan-/Tilt Stabilisation System
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
Password protection
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
Pan-/Tilt Transport Lock
Fan, in zones, temperature controlled
Silent Mode
Automatic "Power Factor Correction
Internal ArtNet to DMX converter
Software update via DMX 512
Operating hours counter
Lamp operating hours counter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=324&productgroup=5&productgroupmain=1

MARTIN Mac Viper Profile

MARTIN

Dynamic effects
Color mixing CMY, independently controllable from 0-100%
Adjustment of colour temperature CTO, adjustable from 6000 - 3200 K
Color wheel 8 interchangeable dichroic color filters + open, continuous rotation, random color
Beam effect wheel 5 interchangeable effect + open, indexable, continuous rotation (gobo + gobo wheel), shake effect;
Breakup wheel 5 interchangeable effect + open, indexable, continuous rotation (gobo + gobo wheel), shake effect;
Effect wheel Exchangeable, gobo animation effects and integrated gobos
Prism Exchangeable and rotatable 4-fold prism
Iris 0-100%, pulse effects
Dimmer / shutter 0 - 100% full range dimmer, even and random strobe, pulse effects, shutter
Dimmer options: 4 dimmer curves
Focus Lens Range depending on zoom angle, from 2 m / 6 m to infinity (approx.)
Zoom 10° - 44°
Pan 540°
Tilt 268°
Position correction system Absolute position monitoring

Lamps
Type 1000 W short arc discharge lamp
Approved lamps Osram HTI 1000/PSLok-it
Color temperature 6000K
Color rendering index CRI >85
Average life 750h
Socket: PGJ28 Lok-it
Ballast Electronic >br>
Control and programming
DMX channels 26/34
Setting and addressing Device menu with backlit display and jog wheel or via DMX;
16-bit resolution beam effects, breakup effects, animation wheel, focus, zoom, pan, tilt;
DMX standard USITT DMX512-A
RDM standard ANSI/ESTAE1.20
Receiver RS-485, optically isolated
Firmware update USB storage medium or USB/DMX interface (via DMX line)

Construction
Color black
Housing Fibre-reinforced, UV-resistant plastic
Reflector glass, cold light
Protection class IP20

Installation
Fixing points Eight quick-release fasteners, octagonal
Orientation Any
Minimum distance to the illuminated area 1.6m
. Minimum distance to combustible material 0.3m

Connections
Mains input Neutrik Power Con ( for NAC3FCA connectors)
DMX and RDM input/output 5-pin, locked. XLR
USB storage media USB port

Connection data
Mains voltage 120-240 V (nominal), 50/60 Hz
Power supply unit. Switching power supply, automatically adapting
Typical RMS current consumption 16.2 A

Typical power and current consumption
120 V, 60 Hz. - 1225 W, 10.3 A, PF 0.999
208 V, 60 Hz. - 1190 W, 5.8 A, PF 0.996
230 V, 50 Hz. - 1186 W, 5.2 A, PF 0.994
240 V, 50 Hz. - 1194 W, 5.0 A, PF 0.993
Measured values determined at nominal voltage. Possible deviation +/- 10%. PF = power factor

Temperatures
Maximum ambient temperature(Ta) 40°C
Maximum housing temperature,stationary,Ta=40°C 150°C
Cooling temperature-controlled fan cooling, air filter, low noise
Total heat flow(calculated,+/-10%at120V,60Hz) 4180BTU/h

Dimensions and weight
Length (base) 472 mm
Length (head) 566 mm
width 472 mm
Width (base) 335 mm
Height (head vertically upwards) 731mm Height (maximum) 748 mm
Weight 36 kg
Minimum centre distance between two devices 650mm

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=256&productgroup=5&productgroupmain=1

MARTIN Mac Viper Wash DX

MARTIN

The MAC Viper Wash DX with shutter sliders is the new standard in compact and powerful washlights. A real alternative to conventional 1500W moving heads or daylight Fresnel fixtures.

Equipped with a specially designed 1000W HID bulb and a highly efficient optical system, the MAC Viper Wash DX offers an extremely homogeneous light field with very good color rendering. The luminous efficiency of 33,000 lumens is significantly higher than the conventional standard and requires up to 50% less energy. The CMY color mixing system with CTO filter and additional color wheel, carefully matched to the lamp, offers excellent color staging. The wide zoom range of 13.5° - 59° allows for a wide range of design freedom without any lens shift.

Furthermore, the MAC Viper Wash DX offers an extremely precise internal shutter system that makes it easy to hide objects, stage edges or scenery. This makes the MAC Viper Wash DX ideal for professional applications in theatres, theatres, operas and exhibitions.

Features
33000 Lumen - very homogeneous illumination with high colour rendition
fast, continuous 1:5 zoom (13.5° - 59°) without lens shift
internal gate diaphragms (shutters) for selective blanking
CMY colour mixing system - fully flexible colour selection via high-quality CMY filters allow excellent and extensive colour selection even in -genuine - red, rich amber, first-class green and deep blue;
Linear CTO filter - for generating color temperatures such as daylight to tungsten CCT and for further saturation of the CMY color mixture;
Dimmer and shutter - a combined dimmer/shutter system offers numerous intensity effects, especially soft fades and continuous black-outs;
motorized iris - very fast and narrow iris with various dynamic effects;
various strobe effects

Dynamic effects
Color mixing CMY
Color temperature CTO, variable 6000K - 3200K
Color wheel - 7 fixed colors + white
Beam - internal Belendenschieber
Iris 0-100% , pulse effects
mechanical dimmer / shutter 0-100% dimmable, strobe effects, 4 predefined dimmer curves
Zoom motorized 13,5° - 59°
Pan 540°
Tilt 268°

Cconnections
Mains connection: Neutrik Powercon
DMX and RDM data in/out: 5-pin XLR connector
USB memory sticks: USB hot socket

Technical data
DMX modes 18ch / 24ch
Power supply: Electronic, 120-240V, 50/60hz
Current 230V 50Hz 1186W, 5.2A
length (head): 566 mm
width: 472 mm
width (base): 335 mm
height (head vertical): 731 mm
height (maximum): 748 mm
weight: 34.7 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=262&productgroup=5&productgroupmain=1

SGM G1 Beam

SGM

The highlights of the G-1 include a sharply defined, homogeneous beam that works quickly and precisely with every movement and creates intensive mid-air effects thanks to its highly efficient white light LED combined with a colour and gobo wheel. The result is extremely high contrast and brightness. Features
Moving Head with white custom LED light source, 6.500K
Mains or battery operation, 10-12 hours operating time
Very narrow beam angle of only 2.8°
Completely wireless , Wireless DMX inside
Weatherproof, dustproof, maintenance-free, protection class IP65
1 x gobo wheel (also customer-specific), 1 x colour wheel
Endless rotation (Pan), 240° Tilt
Fanless

The G-1 is IP65 certified and virtually maintenance free, it can be powered by mains or the optional battery pack - with an impressive ten to twelve hours of operation. Operation even at extreme temperatures from -10˚ C to +40˚ C makes the G-1 a true outdoor product.

The G-1 delivers extremely bright 62,000 lux at a distance of three metres and a colour temperature of 6,500 Kelvin in white light. The fixed beam angle is 2.8˚ and the zoom is adjustable down to 0.3°. The automatic focus works quickly and precisely. The fixture supports DMX512 and can be controlled wirelessly or via cable.

In addition, SGM has developed a patent-pending position preset tool that makes the operation and programming of the G-1 very easy. This tool allows manually set positions to be stored and recalled with a simple program.

Basically, the G-1 is available in two versions, with and without base unit. With the base unit, the application possibilities are particularly practical, as a rechargeable battery can be used and the device can therefore be placed completely independent of power sources.

The unit has a gobo wheel with 19 gobos - plus oscillator and one open position - and a color wheel with 14 colors - also with an additional open position - which further enhance the dynamics and dimension of the compact moving head. In addition, features such as gobo shake, split-colour effects and continuous pan rotation - clockwise and counter-clockwise.

A gobo wheel with specific customer gobos is optionally available. Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=283&productgroup=5&productgroupmain=1

Zu den Highlights des G-1 zählt ein scharf abgegrenzter, homogener Beam, der bei jeder Bewegung schnell und präzise arbeitet und dank seiner hocheffizienten Weißlicht-LED in Verbindung mit einem Farbund einem Goborad intensive Mid-Air-Effekte erzeugt. Das Ergebnis sind extrem hohe Werte bei Kontrast und Helligkeit.
Features
Moving Head mit weißer Custom-LED-Lichtquelle, 6.500K
Netz- oder Akkubetrieb, 10-12 Stunden Betriebszeit
Sehr enger Abtrahlwinkel von nur 2,8°
Völlig kabellos , Wireless DMX inside
Wetterfest, staubdicht, wartungsfrei, Schutzklasse IP65
1 x Goborad (auch kundenspezifisch), 1 x Farbrad
Endlos-Rotation (Pan), 240° Tilt
Lüfterlos

Der G-1 ist IP65 zertifiziert und praktisch wartungsfrei, er kann per Netzversorgung oder dem optionalen Akku betrieben werden - mit einer eindrucksvollen Laufzeit von zehn bis zwölf Stunden. Ein Betrieb auch bei extremen Temperaturen von -10˚ C bis +40˚ C macht den G-1 zu einem wahren Outdoorprodukt.

Der G-1 liefert extrem helle 62,000 Lux auf drei Metern Distanz und eine Farbtemperatur von 6,500 Kelvin bei Weißlicht. Der fixe Abstrahlwinkel liegt bei 2,8˚, der Zoom ist bis auf 0,3° justierbar. Der automatische Fokus arbeitet schnell und präzise. Das Fixture unterstützt DMX512 und kann drahtlos oder per Kabel gesteuert werden.

Darüber hinaus hat SGM ein – zum Patent angemeldetes – Tool für das Positions-Preset entwickelt, das die Bedienung und Programmierung des G-1 sehr einfach werden lässt. Hiermit lassen sich manuell festgelegte Positionen abspeichern, und mit einem einfachen Programm wieder abrufen.

Grundsätzlich gibt es den G-1 in zwei Varianten, mit und ohne Basiseinheit. Mit der Basis sind die Einsatzmöglichkeiten besonders praxisgerecht, da ein Akku verwendet werden kann und sich das Gerät somit völlig unabhängig von Stromquellen platzieren lässt.

Das Gerät verfügt über ein Goborad mit 19 Gobos – plus Oszillator und einer offenen Position – sowie ein Farbrad mit 14 Farben – ebenfalls mit einer zusätzlichen offenen Position –, die die Dynamik und Dimension des kompakten Moving Heads noch einmal deutlich erweitern. Dazu kommen Features wie Gobo Shake, Split-Colour-Effekte und eine ununterbrochene Pan-Rotation – im und gegen den Uhrzeigersinn.

Ein Goborad mit spezifischen Kundengobos ist optional erhältlich. Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=283&productgroup=5&productgroupmain=1

SGM G-Spot

SGM

Moving Head Profile - 850W LED profile spotlight - Weatherproof - Dustproof.

The light source of the G-Spot is based on an 850W LED matrix, consisting of individual, very closely arranged special light emitting diodes in the colours RGB and Yellow. This enables a very natural white reproduction and a flexible colour temperature. The result is a colour depth and brightness that is unparalleled in discharge lamps, even with comparable products from other market leaders in the 1,500W segment.
Unwanted stray light and expensive standby lamp hours are avoided with the G-Spot, as are colour shifts and power losses over the life of the lamp - which is 50,000 hours. The usual hotspots in the beam of discharge lamps do not occur when using an LED light source, the brightness of the beam is always completely uniform and homogeneous. The G-Spot resists jet water from all sides and is dust- and sand-proof (IP65), there are no internal parts that need regular service, cleaning of lenses or gobos is not necessary.
. Other features include two indexable, independent gobo wheels, colorful high-speed strobe effects, ultra-fast color changes, prism, frost filter, iris and zoom with autofocus. For communication there is a choice of NFC/RFID interface, wireless DMX, RDM or DMX.
The G-Spot - the first professional, weatherproof LED profile spotlight.

Special features
Light source: High power RGBY LED
LED lifetime: > 50.000 hours
Zoom range: 16 bit 8° to 43° + pseudo zoom 1° to 43°
Focus: Auto focus
Prism: 4-fold facet rotatable
Frost: Variable from 0% to 100%
Iris: from 1 to 100%, pulse effects
Dimming: Electronic
Strobe: Ultra-high-speed strobe effect (1-50Hz)
Pan/Tilt 540°/ 270°
independent, rotating gobo wheels:
Gobo wheel 1: 5 indexable gobos + open
Gobo wheel 2: 5 indexable gobos + open
Effect wheels: 2 independent effect wheels with continuos effect

Photometric data
Total output of 17.000 lumen
Colourfulness: from 2000K to 10000K

Gobos
Size: 37.5 mm
Maximum image size: 32 mm
Glass gobo: borosilicate glass, high temperature

Programming and control
USITT DMX512A DMX protocol
Control panel, RDM or RFID
Wireless DMX LumenRadio with RDM
16-bit control: Dimmer, Tilt and Pan
DMX channels: 24/30

Dimensions
length (basement): 470 mm
length (head): 585 mm
width (basement): 492 mm
width (head): 458 mm
height (head vertical): 805 mm
height (maximum): 821 mm

Further data
weight: 52 kg
Material: aluminium, steel, plastic PA6.6
IP classification: IP65 Max.
Power consumption: 1100 W
Standby power: 75 W
Mounting: 2x Omega bracket

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=30&productgroup=5&productgroupmain=1

SGM G-Spot Turbo

SGM

The SGM G-Spot Turbo is the logical further development of the very successful first outdoor LED moving light. Now with much more output and higher CRI.

Features
High CRI IP65 RLB LED light source (red, lime, blue)
20,500 lumens and 8º to 43º zoom
2 rotating gobo wheels, FX wheel, 4-fecket prism and ultra-high speed strobe
Extended colour palette with warmer pastel shades and stronger green values;
2.000K-10.000K CTC control, no hotspots
Linear Frost and soft Iris Fades
Maintenance-free and whisper mode
Flicker-free / programmable scenes / DMX, RDM, and wireless control

Technical data
Power: 1100W
Operating voltage: 100V - 240V 50/60hz
Power connection: Powercon true1
DMX connections: (in/out) XLR 5pin cable, 0,2m
Weight: 52kg
Dimensions: 80,5cm x 58,5cm x 49,2cm
Protection class: IP65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=417&productgroup=5&productgroupmain=1

ROBE Robin BMFL Wash XF

ROBE

The BMFL Wash XF has in addition to the features of the BMFL Wash the XF module, which offers two special features:

A scrim module compensates the light distribution depending on the projection angle and the area to be illuminated. The module can be rotated through 360 degrees and can therefore be adapted to the conditions of any lighting situation.

In addition, the XF module offers internal door panels, which ROBE already uses in the MMX and DL4 series. The internal module can be rotated plus/minus 90 degrees to trim the beam accordingly.

Optical system
Bulb HTI 1.700 W/60/P28 Lok-it!, 6.000°K
Socket PGJ28 Lok-it!
Optics Fresnel
Beam angle/zoom 4.5°-55° infinitely variable, motorized

Colours
Colour mixing system CMY plus CTO, macros
Color wheel 1 6 colors plus open, without bars, 8/16-Bit
Color wheel 2 6 colors plus open, Slot & Lock without bars, 8/16-Bit
Color correction filter 6.000°K to 2.700°K stepless
Rainbow effect infinitely variable, forward/backward

Effects
Frost 20°, stepless, motorized, 8-bit, macros
BeamShaper/aperture slider 4 internal BeamShapers, system rotatable +/- 90°, motorized, 8-Bit, macros
Beam Adjustment Scrim Module, System rotatable 360° motorized, 8-Bit
Edge Colour Correction, motorized, 8-Bit
Shutter/Strobe 1-15 flashes/sec (mechanical), macros 7-33 flashes/sec. (electronic)
Dimmer 0-100% linear, 8/16-Bit

Control & Programming
Protocol USITT DMX 512 (RDM), ArtNet, MA Net, Ma-Net 2, sACN
DMX 512 channels 21/25/30/34 (4 modes)
Internal memory 3 sequences of 99 steps each, music trigger
Test and demo programs, master/slave control
Pan/Tilt control tracking and vector
Pan/Tilt Range Pan 540°, Tilt 270°, 16-Bit
Menu Display QVGA touch screen, blue backlight, battery buffered
DMX 512 connector XLR 3 pin + XLR 5 pin
ArtNet connection RJ 45 EtherCon female

Technical data
Mains voltage 200-240 V 50/60 Hz
Current consumption approx. 8.7/7.9/6.6 A at 230 V
Ballast electronic
Dimensions (L x W x H) 62.1 x 48.2 x 64.7 cm (head horizontal)
Weight 35 kg

Special features
Various blackout modes
Pan/Tilt Speed Channel Strobe, CMY, Frost, BeamShaper macros 16 Bit
Channels for Pan/Tilt, Dimmer, Color 1 & 2, Iris, Zoom
High, constant CRI of 92
Selectable dimmer curve Linear/Square
EMS - Pan-/Tilt Stabilisation System
Automatic position correction 200 mm front lens
Remote DMX reset, partial
DMX Analyzer
Password protection
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
Pan-/Tilt Transport Lock
Fan, in zones, temperature controlled
Silent Mode
Automatic "Power Factor Correction
Internal ArtNet to DMX converter
Software update via DMX 512
Operating hours counter
Lamp operating hours counter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=325&productgroup=5&productgroupmain=1

ROBE Robin BMFL Spot

ROBE

BMFL stands for >Bright Multi-Functional Luminaire<. The first device in the family is the BMFL Spot, which replaces the successful ColorSpot 2500E AT. The heart of this powerful moving light is the new HTI 1,500/60/P28 lamp from OSRAM. It can be operated with 1,700, 1,500 or 1,200 watts. The special feature - in all three operating modes the CRI value of the lamp remains constant at a value of 92 and a color temperature of 6,000 Kelvin.
The BMFL Spot is at the same time the brightest, most compact and, due to its weight of only 36 kg, also by far the lightest device in the 1,500 class. One of the key features is the zoom lens with an enormous 11:1 ratio, which converts beam angles from 5° to 55° continuously and in fractions of a second - an effect that is second to none. In addition, the newly developed colour mixing unit is impressive, making it possible to create soft pastel shades as well as rich colours with absolute homogeneity. Two colour wheels, equipped with the most important colours and correction filters as well as the infinitely variable colour correction complete the system. The new, optimized Dual-Graphic Wheel in combination with the two fully equipped gobo wheels allows great and creative effect combinations. The drive units have also been redesigned - the BMFL Spot achieves pan/tilt speeds that have never been achieved before for a device in this class. The new EMS system provides for an optimized motor management and compensates for movements such as those caused by suspended trusses.

Optical system
Bulb HTI 1.700 W/60/P28 Lok-it!, 6.000°K
Socket PGJ28 Lok-it!
Optics Ellipsoidal beam angle/zoom 5°-55° continuous, motorized
Focus infinitely variable, motorized (autofocus)

Colors
Colour mixing system CMY plus CTO, macros
Color wheel 1 - 6 colors plus open, without bars, 8/16-Bit
Color wheel 2 - 6 colors plus open, Slot & Lock without bars, 8/16-Bit
Color correction filter 6.000°K to 2.700°K stepless
Rainbow effect infinitely variable, forward/backward

Gobos
Gobo wheel 1 - 6 gobos plus open (30.8 mm), slot & lock, indexable, rotatable, shakeable 8/16-bit
Gobo wheel 2 - 6 gobos plus open (30.8 mm), slot & lock, indexable, rotatable, shakeable 8/16-bit
Animation Wheel yes (aluminium)
BeamShaper/aperture slider no

effects
Iris stepless, motorized, macros, 8/16-Bit
Frost Light, Medium & Heavy Frost, stepless, motorized, 8-bit, motion macros
Prism 6-fold prism linear & 6-fold prism axial, rotatable, 8-bit
Shutter/Strobe 1-15 flashes/sec (mechanical), macros, 7-33 flashes/sec. (electronic)
Dimmer 0-100% linear, 8/16-Bit
HotSpot Control no

Control & Programming
Protocol USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2, sACN
DMX 512 channels 33/41 (2 modes)
Internal memory 3 sequences of 99 steps each, music trigger
Test and demo programs, master/slave control
Pan/Tilt control tracking and vector
Pan/Tilt Range Pan 540°, Tilt 270°, 16-Bit
Menu Display QVGA Touchscreen, blue backlit, battery buffered
DMX 512 connector XLR 3 pin, XLR 5 pin
ArtNet connection RJ 45 EtherCon female

Technical data
Mains voltage 200-240 V 50/60 Hz
Current consumption approx. 8.7/7.9/6.6 A at 230 V
Ballast electronic

dimensions/weight
Dimensions (L x W x H) 61.2 x 48.2 x 62.9 cm (head horizontal)
Weight 35,8 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=323&productgroup=5&productgroupmain=1

Raincover GFK 600mm, Lichtgrau

MOTION

diameter 600 mm, fire protection class B1
incl. Bracket
incl. 2x Quick-Triggerclamp
incl. 2x eyelets M12
incl. Safety with karabiner emergency link 6mm 55kg
incl. Chain link WLL 500 kg galvanized 7mm, large opening;
incl. Raincover PVC apron, height 600mm Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=353&productgroup=5&productgroupmain=1

ROBE Robin BMFL Blade

ROBE

BMFL - Bright Multi-Functional Luminaire In comparison to the Spot version, the BMFL Blade has a high-quality and precisely working aperture slider system, which also shines with its high speed. This not only allows absolutely detailed illumination. Thanks to the very fast working and rotatable aperture slider unit, additional beamwork effects can be created, which are not possible with a spot moving light. Each of the four aperture sliders can be adjusted and aligned separately and the whole unit can also be rotated freely in position. The high-quality autofocus optics provide a huge 11:1 zoom, which covers the range from 5° to 55° and does its job at a speed not yet realized in this class.

The lamp, which was developed in cooperation with OSRAM especially for the new BMFL series, is optimally matched to the devices and impresses with its technical features. The OSRAM LOK IT! HTI 1,700 W/PS lamp can be operated with an output of either 1,200, 1,500 or 1,700 watts. There is no need for any transition times when changing the power levels, which can be adjusted from a distance both on the device and via the light desk. In addition, the light source convinces with a stable CRI of more than 92 in all three power levels. The colour temperature is specified at 6,000 Kelvin. Thus the BMFL proves to be extremely flexible for different productions and locations.

The engineers at ROBE have invested a lot of time and know-how in the development of the dimmer unit. The result is an extremely homogeneous and at the same time linear dimming of 100 to 0 percent with absolutely constant colours and best values in projection quality, where at no time mechanical dimmer flags are visible in the projection.

But also with all other functions the BMFL Blade works at the highest level. A completely newly developed colour mixing system offers optimised speeds here too, in addition to homogeneous mixing of colours in the saturated range through to soft pastel shades. Two colour wheels are available for this purpose, which sensibly extend the colour mixing system with the most important correction filters and individual colours.

Despite the extensive aperture slider system, hardly any compromises have to be made at the projection level. The BMFL Blade also features two gobo wheels - one rotatable and one static -, an animation wheel for moving effects such as fire or water, two prisms for beam-split effects and a completely closing high-speed iris. Its extensive equipment is completed by a continuously operating frost filter system, which offers many possibilities from slight blurring to a wash effect.

The drive units have also been revised. The BMFL Blade achieves pan/tilt speeds that were previously not possible for a device of this class. The new EMS system ensures optimised motor management and effectively compensates for movements that can occur, for example, with suspended trusses.

Optical system
Light source: HTI 1500 W/60/P28 Lok-it!, 6.000°K
Socket: PGJ28 Lok-it!
Optics: Ellipsoidal
Beam angle/zoom: 5°-55° stepless, motor-driven
Focus: infinitely variable, motorized (autofocus)

Colours
Colour mixing system: CMY plus CTO, macros
Color wheel 1: 6 colors plus open, without bars, 8/16-bit
Color wheel 2: 6 colors plus open, Slot & Lock without bars, 8/16-Bit
Color correction filter: 6,700°K to 2,700°K continuous
Rainbow effect: infinitely variable, forward/backward

Gobos
Gobo wheel 1: 8 gobos plus open, slot & lock
Gobo wheel 2: 6 gobos plus open (30.8 mm), slot & lock indexable, rotatable, shakeable 8/16-bit
Animation Wheel: yes (aluminium)
BeamShaper/aperture sliders: 4 internal aperture sliders, rotatable, system rotatable +/-45°, motorized, 8-bit, macros

Effects
Iris: stepless, motorized, macros, 8/16-bit
Frost: Light, Medium & Heavy Frost, stepless, motorized, 8-bit, macros
Prism: 6-fold prism linear & 6-fold prism axial, rotatable, 8-bit
Shutter/Strobe: 1-15 flashes/sec (mechanical), macros 7-33 flashes/sec. (electronic)
Dimmer0-100% linear, 8/16-Bit
HotSpot Control: no
Fan/Noise Control: infinitely variable

Control & Programming
Protocol: USITT DMX 512 (RDM), ArtNet, MA Net,MA Net2, sACN
DMX 512 channels: 41/42/49 (3 modes)
Internal memory: 3 sequences of 99 steps each, music trigger test and demo programs, master/slave control
Pan/Tilt control: tracking and vector
Pan/Tilt Range: Pan 540°, Tilt 270°, 16-Bit
Menu Display: QVGA touch screen, blue backlit, battery buffered
DMX 512 connector: XLR 3 pin XLR 5 pin
ArtNet connection: RJ 45 EtherCon female

Technical data
Mains voltage: 200-240 V 50/60 Hz
Power consumption: approx. 8.7/7.9/6.6 A at 230 V
. Ballast: electronic

Dimensions/Weight Dimensions:
(L x W x H) 61,4 x 48,2 x 64,6 cm (head horizontal)
Weight: 37,9 kg
Mounting: 2 pairs of holders for 1⁄4 rotation Quick Locks

Special features
Autofocus
Various blackout modes
Pan/Tilt Speed channel
Iris, strobe, CMY, prisms, frost, animation macros
16 bit channels for pan/tilt, dimmer, color 1 & 2, gobo 2, iris, zoom, focus, iris slider
High, constant CRI of 92
Selectable dimmer curve Linear/Square
EMS - Pan-/Tilt Stabilisation System
Automatic position correction
160 mm front lens
Remote DMX reset, partial
DMX-Analyzer RNS2 (ROBE Navigation System 2) with QVGA touchscreen
Battery buffered RNS 2
Password protection
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Slot & Lock quick change frame for gobos & colours
Pan-/Tilt Transport Lock
Fan, in zones, temperature controlled
Silent Mode for adjustment of the number of fan revolutions (and the resulting noise level) by the user
Automatic >Power Factor Correction
Internal ArtNet to DMX converter
Automatic voltage adjustment 200-240 V
Software update via DMX 512
Operating hours counter
Lamp operating hours counter
Optional LumenRadio CRMX Wireless DMX

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=247&productgroup=5&productgroupmain=1

MARTIN Mac Viper Performance

MARTIN

The MAC Viper Performance is the new standard in compact and powerful profile fixtures as a real alternative to conventional 1500W moving heads. Equipped with a specially developed 1000W HID lamp and a highly efficient optical system, the MAC Viper Performance offers an extremely homogeneous light field with very good color rendering. The light output of 26.000 lumen is significantly higher than the conventional standard and requires up to 50% less energy. In addition to numerous functions such as an indexable and rotatable gobo wheel, a prism, a frost filter, an iris, a zoom with coupled focus, a combination of electrical and mechanical dimmer/shutter system, it offers a +/- 55° pivoting framing system with +/- 30° tiltable iris sliders and a retractable animation wheel. This makes the MAC Viper Performance ideal for professional applications in theatres, theatres, operas and exhibitions. The low-noise operation and the CMY color mixing system with CTO filter and additional color wheel, which is carefully matched to the light source, finally round off the functional diversity of the MAC Viper Performance.

Special features
26,000 lumen - high light quality with excellent homogeneity;
1:5 zoom - fast zoom movements with combined focus positioning (Auto-Linked-Focus)
extra large front lens - with a diameter of 140 mm, the front lens is larger than any comparable headlamp of its kind, thus providing an extremely fat beam;
5 indexable and rotatable glass gobos with minimum focus difference to the framing unit
4 aperture sliders with +/- 30° tilt angle as well as +/- 55° rotatable aperture slider module - very precise cue positioning;
Animation wheel with continuous rotation in both directions
CMY color mixing system - fully flexible color selection via high-quality CMY filters allow excellent and wide color selection even in true red, rich amber, premium green and deep blue;
Color wheel with 7 interchangeable colors for extended color space
Linear CTO filter - for the generation of color temperatures like daylight to tungsten CCT and for further saturation of the CMY color mixture;
Dimmer and shutter - a combined dimmer/shutter system offers numerous intensity effects, especially soft fades and continuous black-outs;
motorized iris - very fast and narrow iris with various dynamic effects;
Strobe Effect - various strobe functions, combined from mechanical and electrical shutter/dimmer, create very fast and accurate strobe effects;
soft frost filter - lets gobos and shadows run out softly;
4-fold prism - a razor-sharp light beam splitting with freely rotatable and indexable prism allows unlimited tile or beam effects

Dimensions and weight
Length (head): 566 mm
width: 472 mm
Width (base): 335 mm
Height (head vertical): 731 mm
Height (maximum): 748 mm
Weight: 37,9 kg

Light source
Appoved light sources: Osram HTI 1000/PS Lok-it
Type: 1000W short arc discharge lamp
Colour temperature: 6000 K
Colour rendering index (CRI): >85
Average life: 750 h
Socket: PGJX36
Ballast: electronic

Dynamic effects
Colour mixing: CMY, independently adjustable, 0 - 100%
Color temperature correction: CTO, variable 6,000 - 3,200 K
Color wheel: 7 interchangeable, dichroic color filters plus open, color wheel indexable, rotatable, random colors;
Aerial gobo wheel: 5 interchangeable texture/break-up gobos + open, indexable and rotatable with shake effect;
Gobo animation: exchangeable animation wheel, indexable and rotatable in different directions and speeds;
Orifice slider system: +/- 55° rotatable orifice slider module with 4 individually movable orifice slides;
Prism: Interchangeable, rotatable 4-fold prism
Iris diaphragm: 0 - 100%
Frost filter: variable
Mechanical dimmer / shutter: 0-100% full range dimmer, random and variable flash (pulse effects, instant open and close;
Dimming options: 4 different dimming curves
Focus lens: approx. 2m/6m to infinity, zoom-focus coupling for automatically following focus when zoom changes;
Zoom lens: 10° - 44° Zoom focus: 3 zones (near, medium, far)
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring

Control and programming
DMX channels: 32/40 Configuration and addressing: user interface with display and jog wheel or via DMX
16 bit resolution: dimmer, gobo rotation, zoom, focus, pan and tilt
DMX specification: USITT DMX 512-A
RDM specification: ANSI/ESTA E1.20
Receiver: RS-485, optically isolated
Software update: USB storage device or USB/DMX interface via DMX ports

Construction
Color: black
Housing: UV-resistant, fibre-reinforced plastic
Reflector: glass, cold light
Protection class: IP20

Gobos
Size: E27 (size E, max. image diameter 27 mm)
Approved material: Borosilicate 3.3 or better; with dichroic or matt aluminium coating; metal gobos are not approved
outer diameter: 37.5 mm +0/- 0.2 mm
Maximum motif diameter: 27 mm
Maximum thickness: 1.1 mm +/- 0.1 mm

Installation
Mounting points: 8 positions for Omega clamps
Orientation: Any
Minimum distance to the illuminated surface: 3.4 m
Minimum distance to combustible material: 0.3 m

Connections
Mains connection: Neutrik Powercon
DMX and RDM data in/out: 5-pin XLR connector
USB memory sticks: USB hot socket

Electrical data
Power supply: 120-240 V nominal, 50/60 Hz Voltage selector switch: Automatically adapting switching power supply
Typical effective inrush current (one half-wave): 16.2 A

Temperatures
Cooling: Fan cooling (temperature-controlled, low-noise, with air filter)
Maximum permissible ambient temperature (Ta): 40° C
. Minimum ambient temperature (Ta): 5° C
Maximum surface temperature, stationary, Ta=40° C: 150° C
Heat flow (calculated, +/- 10% at 120 V, 60 Hz): 4180 BTU/hr

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=24&productgroup=5&productgroupmain=1

ROBE Robin 800 LED Wash Pure White SW housing White

ROBE

The ROBE Robin 800 PureWhite SW combines the advantages of the white light properties of the SmartWhite (SW) LED known from the 600 PureWhite series with the optical properties of the Robin 800 LEDWash and its unique beamshaper module. With this model, the colour temperature can be mixed continuously via DMX 512 from 2,800° K - 6,300° K. Due to the white LED multichips the Robin 800 PureWhite SW impresses with its increased output in white tones compared to the RGBW version and compared to the 600 PureWhite series due to the increase in power to 15 watts per optic.
Its beamshaper module offers the user the possibility to deform the beam elliptically and to index and rotate it steplessly in order to be able to react even better to different lighting situations. The beamshaper module is removable, which allows the Robin 800 PureWhite SW to be used as a classic washlight. Due to the simultaneously extended zoom range of 8°-63° spectacular beam effects are also possible. All the features of this device in Summer make it a unique device within the LEDWash family from ROBE, which is only available from ROBE in this form. The Robin 800 PureWhite SW comes standard with LumenRadio's PLASA Award winning CRMX module for wireless DMX operation with highest reliability and full RDM support. This fixture also features a selectable theatre mode, which further reduces the already very quiet noise level. In the theatre mode, functions such as pan and tilt movements, gobo and prism rotations and zoom are reduced in their maximum speed, resulting in a reduction of noise. On the other hand, all Robin devices have an adaptive fan control which constantly adjusts the rotation and thus the noise of the fans thanks to internal temperature measurement.

Housing WHITE

Optical system
Optics: interchangeable optical systems
Beam angle/zoom: 8°-63° , stepless, motorized (without BeamShaper Module) - 8° x 26° @ min. zoom (with standard BeamShaper Module) - 19° x 35° @ min. zoom (with optional BeamShaper Module)

LED light sources
LEDs: 37x 15 W OSRAM Ostar SW Multichip
Colours: 37x SmartWhite (2.600° K - 8.000° K)
LED service life: > 50,000 hours
Colour mixture: SW

Temperature ranges
ambient temperature: +45°C
Operating temperature: +75°C
Cooling: Fan temperature controlled

Effects
Beamshaper: infinitely indexable & rotatable, 8/16-bit (exchangeable modules)
Shutter/Strobe: 1-20 flashes/sec (electronic), macros
Dimmer: 0-100% linear, 8/16-bit

Control & Programming
Protocol: USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2
DMX 512 channels: 11/13/17/24/25/25
Internal memory: 3 programmable sequences of 99 steps each Test and demo programs, master/slave control
Pan-Tilt control: tracking and vector
Pan-Tilt Range: Pan 540°, Tilt 300°, 8/16-Bit, Macros
Menu Display: QVGA touch screen, blue backlit, battery buffered
DMX 512 connector: XLR 3 pin XLR 5 pin
ArtNet connection: RJ 45 EtherCon female

Technical data
Mains voltage: 100-240 V 50/60 Hz
Power consumption: 1.8 A at 230 V

Dimensions/Weight
Dimensions: (L x W x H)20.3 x 34.3 x 44.4 cm
Weight: 11 kg
mounting points: 2 pairs of mounts for 1⁄4 Rotation Quick Locks

Special features
Theatre mode (reduced pan/tilt, gobo & prism, zoom speed)
Adaptive fan control
3 separately controlled concentric rings
CTC Macro Channel
Various blackout modes
Pan/Tilt Speed channel
Strobe macros 16 bit channels for pan/tilt, dimmer, zoom
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
New RNS2 (ROBE Navigation System 2) with QVGA touchscreen
Battery buffered RNS 2
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Fan, in zones, temperature controlled
Internal ArtNet to DMX converter
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=248&productgroup=5&productgroupmain=1

ROBE Robin 800 LED Wash Pure White SW

ROBE

The ROBE Robin 800 PureWhite SW combines the advantages of the white light properties of the SmartWhite (SW) LED known from the 600 PureWhite series with the optical properties of the Robin 800 LEDWash and its unique beamshaper module. With this model, the colour temperature can be mixed continuously via DMX 512 from 2,800° K - 6,300° K. Due to the white LED multichips the Robin 800 PureWhite SW impresses with its increased output in white tones compared to the RGBW version and compared to the 600 PureWhite series due to the increase in power to 15 watts per optic.
Its beamshaper module offers the user the possibility to deform the beam elliptically and to index and rotate it steplessly in order to be able to react even better to different lighting situations. The beamshaper module is removable, which allows the Robin 800 PureWhite SW to be used as a classic washlight. Due to the simultaneously extended zoom range of 8°-63° spectacular beam effects are also possible. All the features of this device in Summer make it a unique device within the LEDWash family from ROBE, which is only available from ROBE in this form. The Robin 800 PureWhite SW comes standard with LumenRadio's PLASA Award winning CRMX module for wireless DMX operation with highest reliability and full RDM support. This fixture also features a selectable theatre mode, which further reduces the already very quiet noise level. In the theatre mode, functions such as pan and tilt movements, gobo and prism rotations and zoom are reduced in their maximum speed, resulting in a reduction of noise. On the other hand, all Robin devices have an adaptive fan control which constantly adjusts the rotation and thus the noise of the fans thanks to internal temperature measurement.

Optical system
Optics: interchangeable optical systems
Beam angle/zoom: 8°-63° , stepless, motorized (without BeamShaper Module) - 8° x 26° @ min. zoom (with standard BeamShaper Module) - 19° x 35° @ min. zoom (with optional BeamShaper Module)

LED light sources
LEDs: 37x 15 W OSRAM Ostar SW Multichip
Colours: 37x SmartWhite (2.600° K - 8.000° K)
LED service life: > 50,000 hours
Colour mixture: SW

Temperature ranges
ambient temperature: +45°C
Operating temperature: +75°C
Cooling: Fan temperature controlled

Effects
Beamshaper: infinitely indexable & rotatable, 8/16-bit (exchangeable modules)
Shutter/Strobe: 1-20 flashes/sec (electronic), macros
Dimmer: 0-100% linear, 8/16-bit

Control & Programming
Protocol: USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2
DMX 512 channels: 11/13/17/24/25/25
Internal memory: 3 programmable sequences of 99 steps each Test and demo programs, master/slave control
Pan-Tilt control: tracking and vector
Pan-Tilt Range: Pan 540°, Tilt 300°, 8/16-Bit, Macros
Menu Display: QVGA touch screen, blue backlit, battery buffered
DMX 512 connector: XLR 3 pin XLR 5 pin
ArtNet connection: RJ 45 EtherCon female

Technical data
Mains voltage: 100-240 V 50/60 Hz
Power consumption: 1.8 A at 230 V

Dimensions/Weight
Dimensions: (L x W x H)20.3 x 34.3 x 44.4 cm
Weight: 11 kg
mounting points: 2 pairs of mounts for 1⁄4 Rotation Quick Locks

Special features
Theatre mode (reduced pan/tilt, gobo & prism, zoom speed)
Adaptive fan control
3 separately controlled concentric rings
CTC Macro Channel
Various blackout modes
Pan/Tilt Speed channel
Strobe macros 16 bit channels for pan/tilt, dimmer, zoom
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
New RNS2 (ROBE Navigation System 2) with QVGA touchscreen
Battery buffered RNS 2
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Fan, in zones, temperature controlled
Internal ArtNet to DMX converter
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=248&productgroup=5&productgroupmain=1

MARTIN Mac Viper AirFX

MARTIN

Flexible and efficient - The MAC Viper AirFX is based on a completely new moving-head concept and combines sharp mid-air effects with a balanced wash illumination. The carefully selected new gobo designs combined with the wide zoom range of 11 - 59° provide breathtakingly sharp beam effects. The possibility of fading the spotlight into a washlight at any time offers numerous application possibilities.

The highly efficient optics of the MAC Viper AirFX offers the performance of a profile spotlight with the intensity of a wash. The MAC Viper AirFX combines the compact size, impressive speed, unsurpassed brightness and outstanding color for which the MAC Viper Series is renowned. The intensity of the outstanding light quality is also based on a 1000W bulb and even exceeds that of conventional, much larger and heavier moving heads in the 1500W class.

Features
extremely bright with 34500 lumens and excellent colour rendering;
continuous 1:5 zoom (11°-59°) with coupled focus system;
160mm precision front lens for extreme beam effects
Frost filter with snap or fade function for soft frost effects
Gobo wheel with 5 indexable and rotatable gobo slots;
additional static gobo wheel with 7 gobos
CMY color mixing system - fully flexible colour selection via high-quality CMY filters allow excellent and wide colour selection even in "real" red, "rich" amber, "first-class" green and "deep" blue;
Color wheel with 7 interchangeable colors for extended color space;
Linear CTO filter - for generating color temperatures such as daylight to tungsten CCT and for further saturation of the CMY color mixture;
Dimmer and shutter - a combined dimmer/shutter system offers numerous intensity effects, especially soft fades and continuous black-outs;
motorized iris - very fast and narrow iris with various dynamic effects;
various strobe effects

Technical data
Length (head): 566 mm
width: 473 mm
Width (base): 335 mm
Height (head vertical): 732 mm
Height (maximum): 749 mm
Weight: 35.7 kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1393&productgroup=5&productgroupmain=1

MARTIN Mac Quantum Wash

MARTIN

The Mac Quantum Wash is a wash moving head with particularly high-quality performance and effect variety. In addition to an extremely homogeneous light field with a variably adjustable 1:6 zoom, from narrow to wide beam, the wash spotlight enables a comprehensive colour palette with consistent colour mixing. The light quality of the energy-efficient RGBW LED spotlight guarantees a homogeneous and maximum luminous flux with a raised colour rendering index. The combination of high quality branded LEDs with a total output of 750W, a sophisticated temperature management and the adapted optics make the Mac Quantum Wash the first choice for theatre, TV studio, touring and any other application. In addition, the spotlight is equipped with a variety of breathtaking additional effects such as the beam twister, an individual LED cluster control and color morphing.

Features
very bright with high light quality for applications with highest demands;
1:6 Zoom
Unique and expressive ColorganicsTM system
high quality optical system
compact design
extremely fast movements
extremely robust construction

Dimensions and weight
Length: 452 mm
Width: 431 mm
Height (maximum): 581 mm
Height (head vertical): 511 mm
Weight: 21 kg

Dynamic effects
Color mixing: RGBW
Beam effects: Beam Twister, intensity and color morphing, color spin effects;
Color wheel effect: virtual color wheel with 36 fixed colors plus open, continuous rotation with variable speed and random colors Color ring effect: 36 split ring colors with variable rotation speed of the virtual color wheel;
Shutter effect: Electronic with variable speed, regular or irregular (random)
Preprogrammed effects: Selection of independent or synchronized color, intensity, beam twister and beam zone effects;
Electronic dimmer: 4 different dimming curves selectable
Color temperature correction: variable, 2,000 - 10,000 K Zoom lens: 11° - 59° tenths of a degree scattering angle
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via control display or DMX

Control and programming
Control: DMX
Control protocol: independent control of the different beam zones (rings)
Macros selectable via DMX: synchronized effects of the beam zones;
RDM: Implemented
Color resolution: 8-bit resolution, with 16-bit resolution for pan/tilt/dimmer and lens rotation;
DMX channels: 33/14
Configuration and addressing: Operating panel with graphic display
DMX specification: USITT DMX 512-A
RDM specification: ANSI/ESTA E1.20
Transmission hardware: RS-485
Update the device software: Via DMX with Martin USB Duo DMX Interface

Optics
Light source: 50x 15 W RGBW LEDs
Minimum LED lifetime: 50,000h (at 70% of the original luminous flux)*
*Manufacturer's specifications were determined under test conditions specified by the manufacturer. Photometric data
Total luminous flux: 15,400 lm

Construction
Color: black
Housing: highly impact resistant, flame retardant thermoplastic material;
Protection class: IP20

Installation
Attachment points: 2 pairs of quick-release fasteners
Mounting location: Only suitable for indoor use; fastening to surfaces or structures necessary;
Orientation: Any
Minimum distance to combustible material: 0.2 m
Minimum distance to illuminated surface: 2.0 m

Connections
Mains connection: Neutrik Powercon
DMX and RDM data in/out: 5-pin XLR connector

Electrical data
Power supply: 120-240 V nominal, 50/60 Hz
Maximum power consumption: 880 W
Voltage selector switch: automatic voltage adjustment
Typical power consumption, all effects static, 0% light output: approx. 50 W

Typical current and power consumption
120 V, 60 Hz: 7.4 A, 880 W, PF 0.999
208 V, 60 Hz: 4.2 A, 860 W, PF 0.995
230 V, 50 Hz: 3.8 A, 856 W, PF 0.993
240 V, 50 Hz: 3.7 A, 858 W, PF 0.992
All measurements were made at nominal voltage, all LEDs full brightness. Deviation of +/- 10% possible;

Temperatures
Cooling: Forced cooling via quiet, temperature-controlled fan;
selectable cooling stages
Maximum permissible ambient temperature (Ta): 40° C
. Minimum ambient temperature (Ta): 5° C
Total heat flow (calculated, +/- 10%): 3000 BTU/hr

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=42&productgroup=5&productgroupmain=1

ROBE Robin 800 LED wash housing white

ROBE

The Robin 800 LEDWash builds on the successful basis of the Robin 600 LEDWash. In addition to an increase in performance to 15 watts per optic, ROBE developed a new beamshaper module that offers the user the possibility of elliptically deforming the beam and infinitely indexing and rotating it, so that it can react even better to the most varied lighting situations. The beamshaper module is removable. This means that Robin 800 LEDWash can also be used as a classic washlight. Due to the simultaneously extended zoom range of 8°-63°, spectacular beam effects are also possible. With these unique features, the "latest addition" to ROBE's LEDWash family clearly distinguishes itself from comparable LED-based washers. The Robin 800 LEDWash comes standard with the PLASA Award winning CRMX module from LumenRadio for wireless DMX operation with highest reliability and full RDM support.

Special features
37x RGBW Multicolour LED
8°-63° continuous zoom
Rotatable Beamshaper Module
No color shadows compared to other LED headlights
Stepless motorized zoom from 8°-63°
3 separately controlled concentric rings for spectacular beam effects & chases
Spectacular stroboscope effects (also colored) at low power consumption
CTC Macro Channel
Variable exchangeable beamshaper modules
Various blackout modes
Pan/Tilt Speed channel
16 bit channels for pan/tilt, dimmer, RGBW, zoom
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
New RNS2 (ROBE Navigation System 2) with QVGA touchscreen
Battery buffered RNS 2
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Fans, in zones, temperature controlled
Internal ArtNet to DMX converter
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter
LumenRadio CRMX
Wireless DMX module integrated

Optical system
Optics: fixed optical systems
Beam angle/zoom: 20° x 10° asymmetrical (at min. zoom)
8°-63°, stepless, motorized (without BeamShaper module)

LED light sources
LEDs: 37x 15 W OSRAM RGBW Multichip
Colours: 37x red, 37x motion blue, 37x green, 37x white
Lifetime of LEDs: > 50.000 hours
Color mixing: RGBW + CTC

temperature ranges
ambient temperature: +45°C
Operating temperature: +75°C
Cooling: Fan temperature controlled

effects
Beamshaper: infinitely indexable & rotatable, 8/16-Bit
Shutter/Strobe: 1-20 flashes/sec (electronic), macros
Dimmer: 0-100% linear, 8/16-bit

Control & Programming
Protocol: USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2
DMX 512 channels: 11/16/22/37/38/38 (6 modes)
Internal memory: 3 programmable sequences of 99 steps each
Test and demo programs, master/slave control
Pan-Tilt control: tracking and vector
Pan-Tilt Range: Pan 540°, Tilt 300°, 8/16-Bit, Macros
Menu Display: QVGA touch screen, blue backlit, battery buffered
DMX 512 connector: XLR 3 pin and XLR 5 pin
ArtNet connection: RJ 45 EtherCon female

Technical data
Mains voltage: 100-240 V 50/60 Hz
Power consumption: 1.8 A at 230 V
Dimensions/Weight: Dimensions (L x W x H) 20.3 x 34.3 x 44.4 cm
Weight: 11,5 kg
mounting points: 2 pairs of mounts for 1⁄4 Rotation Quick Locks

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=3&productgroup=5&productgroupmain=1

ROBE Robin 800 LED Wash

ROBE

The Robin 800 LEDWash builds on the successful basis of the Robin 600 LEDWash. In addition to an increase in performance to 15 watts per optic, ROBE developed a new beamshaper module that offers the user the possibility of elliptically deforming the beam and infinitely indexing and rotating it, so that it can react even better to the most varied lighting situations. The beamshaper module is removable. This means that Robin 800 LEDWash can also be used as a classic washlight. Due to the simultaneously extended zoom range of 8°-63°, spectacular beam effects are also possible. With these unique features, the "latest addition" to ROBE's LEDWash family clearly distinguishes itself from comparable LED-based washers. The Robin 800 LEDWash comes standard with the PLASA Award winning CRMX module from LumenRadio for wireless DMX operation with highest reliability and full RDM support.

Special features
37x RGBW Multicolour LED
8°-63° continuous zoom
Rotatable Beamshaper Module
No color shadows compared to other LED headlights
Stepless motorized zoom from 8°-63°
3 separately controlled concentric rings for spectacular beam effects & chases
Spectacular stroboscope effects (also colored) at low power consumption
CTC Macro Channel
Variable exchangeable beamshaper modules
Various blackout modes
Pan/Tilt Speed channel
16 bit channels for pan/tilt, dimmer, RGBW, zoom
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
New RNS2 (ROBE Navigation System 2) with QVGA touchscreen
Battery buffered RNS 2
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Fans, in zones, temperature controlled
Internal ArtNet to DMX converter
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter
LumenRadio CRMX
Wireless DMX module integrated

Optical system
Optics: fixed optical systems
Beam angle/zoom: 20° x 10° asymmetrical (at min. zoom)
8°-63°, stepless, motorized (without BeamShaper module)

LED light sources
LEDs: 37x 15 W OSRAM RGBW Multichip
Colours: 37x red, 37x motion blue, 37x green, 37x white
Lifetime of LEDs: > 50.000 hours
Color mixing: RGBW + CTC

Temperature ranges
ambient temperature: +45°C
Operating temperature: +75°C
Cooling: Fan temperature controlled

Effects
Beamshaper: infinitely indexable & rotatable, 8/16-Bit
Shutter/Strobe: 1-20 flashes/sec (electronic), macros
Dimmer: 0-100% linear, 8/16-bit

Control & Programming
Protocol: USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2
DMX 512 channels: 11/16/22/37/38/38 (6 modes)
Internal memory: 3 programmable sequences of 99 steps each
Test and demo programs, master/slave control
Pan-Tilt control: tracking and vector
Pan-Tilt Range: Pan 540°, Tilt 300°, 8/16-Bit, Macros
Menu Display: QVGA touch screen, blue backlit, battery buffered
DMX 512 connector: XLR 3 pin and XLR 5 pin
ArtNet connection: RJ 45 EtherCon female

Technical data
Mains voltage: 100-240 V 50/60 Hz
Power consumption: 1.8 A at 230 V
Dimensions/Weight: Dimensions (L x W x H) 20.3 x 34.3 x 44.4 cm
Weight: 11,5 kg
mounting points: 2 pairs of mounts for 1⁄4 Rotation Quick Locks

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=3&productgroup=5&productgroupmain=1

MARTIN Mac Quantum Profile

MARTIN

Equipped with a 475W LED chip, the Martin by HARMAN MAC Quantum Profile is comparable to a conventional moving light with 700W discharge lamp. The compact device, weighing only about 23kg, convinces with its very high image quality. Additionally the MAC Quantum Profile is equipped with a CMY color mixing, a fixed and a rotatable gobo wheel. With the special Animotion™ FX system you can also create a variety of effects for the greatest possible creative freedom.

Features
homogeneous light distribution with particularly high-contrast and sharp projection;
first, real alternative to conventional 700W HID headlights;
very low dead weight and extremely compact design;
extremely fast movements and effects
fully equipped incl. CMY color mixing and 1:3 zoom
consistent quality of light thanks to the latest LED technology

Technical data
Operating voltage/ supply voltage: 120-240V
Mains frequency: 50Hz, 60Hz
Power: 750 W
Power of the lamp: 475 W
Beam angle/zoom: 12°-36°
Connectors on the input side: XLR3, XLR5, powerCON
Connectors on the output side: XLR3, XLR5
IP classification: IP20

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=655&productgroup=5&productgroupmain=1

MARTIN MAC III Profile

MARTIN

1.500W short arc discharge lamp with Lok-it! base
CMY color mixing and variable CTO with improved, durable coating technology;
Color wheel with 7 colors plus open
Zoom and focus with zoom-focus tracking absolutely even dimmer plus additional shutter for complete blackout;
two gobo wheels with 5 indexable and rotatable gobos plus open;
interchangeable 4-facet prism, indexable and rotatable;
Motorized iris diaphragm
Mechanical and electronic strobe effect 2-10 Hz, pulse effect, immediate blackout;
Gobo animation wheel with control of direction and angle of rotation;
Pan and tilt (540° / 267°) with absolute coding
Patented, very quiet cooling system
Modular design for easier maintenance, service and system conversion (profiles vs. performance version);
electronic ballast, quick re-ignition of the burner, flicker-free light;
RDM, ArtNet II prepared and USB service port
battery backed TFT display and jog wheel for navigation

Features of the MacIII Performance
1.500W short arc discharge lamp with Lok-it! base
Subtractive CMY colour mixing system
Color wheel with 7 positions plus open
Variable CTO
5 indexable and rotatable gobos
Shifting of focused gobos
Uniform dimming and mechanical shutter for complete black-out;
1:5 zoom with auto focus (near, middle, far)
gobo animation wheel with control of direction and angle of rotation;
Continuous rotation, full crossing of the blades with even focus over each blade;
Motorized iris diaphragm
Mechanical and electronic strobe effect 2-10 Hz, pulse effect, immediate blackout;
Patented, low-noise cooling. Quietest device in its class;
Modular design for easier maintenance, service and system conversion (profiles vs. performance version)
Simple conversion between profiles and performance. No need to invest in two completely different units;
electronic ballast, quick re-ignition of the burner, flicker-free light;
Pan and Tilg (540°/267°) with absolute positrons control
RDM capable, Service USB and Art-Net II prepared
Battery-buffered TFT display and rotating wheel Navigation

Dimensions and weight (based on the MacIII profile)
length (head): 712 mm
width: 536 mm
height: 936 mm weight: 53.5 kg

Light source
Type: 1,500 W short arc discharge lamp
Approved lamp: Osram HTI 1500W/60/P50
Colour temperature: 6000 K
Colour rendering index (CRI): >85
Average life: 750 h
Hot Re-ignitable: Semi-hot (re-ignitable after less than 90s)
Base: PGJ50Ballast: electronic

Dynamic effects
Color mixing: CMY, independently adjustable, 0 - 100% color temperature correction: CTO, variable 0-100%
Color wheel: 7 interchangeable, dichroic color filters plus open, color wheel indexable, rotatable, random colors;
Rotating gobo wheel: Two rotating gobo wheels, each with 5 interchangeable gobos + open; gobo indexing, rotation and shake;
Gobo animation: Interchangeable animation wheel, indexing or continuous rotation in different angles, speed and direction;
Prism: Exchangeable, rotatable 4-fold prism iris: 0 - 100%, pulse effects;
Mechanical dimmer: 0-100%, four different dimmer curves
Mechanical shutter: flash effect 2 - 10 Hz, evenly or randomly pulsating open / close, 8 bit resolution;
Focus lens: 2m to infinity
Zoom lens: 11.5° - 55°Zoom focus: 3 zones (near, medium, far)
Pan: 540°Tilt: 268°Position correction system: Absolute position monitoring

Gobos
Size: E
Approved material: borosilicates 3.3 or better; with dichroic or matt aluminium coating; metal gobos are not permitted;
Outside diameter: 37.5 mm +0/- 0.2 mm
Maximum motif diameter: 30 mm +/- 0.4 mm
Maximum thickness: 1.1 mm +/- 0.1 mm

Gobo animation wheels
outer diameter: 133.9 mm +/- 0.1 mm
Outer motif diameter: 130 mm
Inner motif diameter: 32 mm
Thickness: 1.1 mm +/- 0.1 mm
Assembly: Borofloat (borosilicate glass) or better with dichroic or better aluminium coating;

Connections
Mains connection: Neutrik PowerCon plug with 3m connection cable
DMX and RDM data in/out: 5-pin XLR connector
Ethernet (Artnet II compatible, ACN-ready): Neutrik RJ-45 jack (for Neutrik EtherCon connectors with housing)
USB Memory Sticks: USB Hot Socket
Future USB options: USB device socket

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=401&productgroup=5&productgroupmain=1

MARTIN MAC III Performance

MARTIN

The MAC III Performance is a high performance moving head with a new type of iris slider system, where the individual iris sliders interlock with each other so that they can be moved completely through the beam path, pushing off any triangle or square while still all being in one image plane for optimal image sharpness. In addition, for the first time, the aperture slider can be rotated and indexed without a stop. All in all, completely new projection and effect possibilities result. The MAC III Performance is available either as a stand-alone fixture or as a module that can replace the projection module of a MAC III ProfileTM within minutes, transforming any MAC III ProfileTM into a MAC III Performance.

Features of the MacIII Profile
1.500W short arc discharge lamp with Lok-it! base
CMY color mixing and variable CTO with improved, durable coating technology;
Color wheel with 7 colors plus open
Zoom and focus with zoom focus Tracking
absolutely even dimmer plus additional shutter for complete blackout;
two gobo wheels with 5 indexable and rotatable gobos plus open;
exchangeable 4-facet prism, indexable and rotatable;
Motorized iris diaphragm
Mechanical and electronic strobe effect 2-10 Hz, pulse effect, immediate blackout;
Gobo animation wheel with control of direction and angle of rotation;
Pan and tilt (540° / 267°) with absolute coding
Patented, very quiet cooling system
Modular design for easier maintenance, service and system conversion (profiles vs. performance version)
electronic ballast, fast re-ignition of the burner, flicker-free light;
RDM, ArtNet II prepared and USB service port
battery backed TFT display and jog wheel for navigation

Features of the MacIII Performance
1,500W short arc discharge lamp with Lok-it! base
Subtractive CMY colour mixing system
Color wheel with 7 positions plus open
Variable CTO
5 indexable and rotatable gobos
Displacement of focused gobos
Uniform dimming and mechanical shutter for complete black-out;
1:5 zoom with auto focus (near, middle, far)
Gobo animation wheel with control of the direction and angle of rotation;
Continuous rotation, full crossing of the blades with even focus over each blade;
Motorized iris diaphragm
Mechanical and electronic strobe effect 2-10 Hz, pulse effect, immediate blackout;
Patented, low-noise cooling. Quietest device in its class;
Modular design for easier maintenance, service and system conversion (profiles vs. performance version)
Easy conversion between profiles and performance. No need to invest in two completely different units;
electronic ballast, quick re-ignition of the burner, flicker-free light;
Pan and tilt (540°/267°) with absolute position control
RDM-capable, service USB and Art-Net II prepared
Battery-buffered TFT display and rotating wheel navigation
Dimensions and weight (based on the MacIII profile)
Length (head): 712 mm
width: 536 mm
height: 936 mm
Weight: 53.5 kg

Light source
Type: 1,500 W short arc discharge lamp
Approved lamp: Osram HTI 1500W/60/P50
Colour temperature: 6000 K
Colour rendering index (CRI): >85
Average life: 750 h
Hot Re-ignitable: Semi-hot (re-ignitable after less than 90s)
Base: PGJ50Ballast: electronic

Dynamic effects
Color mixing: CMY, independently adjustable, 0 - 100%Color temperature correction: CTO, variable 0-100%;
Color wheel: 7 interchangeable, dichroic color filters plus open, color wheel indexable, rotatable, random colors;
Rotating gobo wheel: Two rotating gobo wheels, each with 5 interchangeable gobos + open; gobo indexing, rotation and shake;
Gobo animation: Interchangeable animation wheel, indexing or continuous rotation at different angles, speed and direction;
Prism: Exchangeable, rotatable 4-fold prism iris: 0 - 100%, pulse effects;
Mechanical dimmer: 0-100%, four different dimmer curves;
Mechanical shutter: flash effect 2 - 10 Hz, evenly or randomly pulsating open / close, 8 bit resolution;
Focus lens: 2m to infinity
Zoom lens: 11.5° - 55°Zoom focus: 3 zones (near, medium, far)
Pan: 540°Tilt: 268°Position correction system: Absolute position monitoring

Gobos
Size: E
Approved material: borosilicates 3.3 or better; with dichroic or matt aluminium coating; metal gobos are not permitted;
Outside diameter: 37.5 mm +0/- 0.2 mm
Maximum motif diameter: 30 mm +/- 0.4 mm
Maximum thickness: 1.1 mm +/- 0.1 mm

Gobo animation wheels
Outside diameter: 133.9 mm +/- 0.1 mm
Outer motif diameter: 130 mm
Inner motif diameter: 32 mm
Thickness: 1.1 mm +/- 0.1 mm
Assembly: Borofloat (borosilicate glass) or better with dichroic or better aluminium coating

Connections
Mains connection: Neutrik PowerCon plug with 3m connection cable
DMX and RDM data in/out: 5-pin XLR connector
Ethernet (Artnet II compatible, ACN-ready): Neutrik RJ-45 jack (for Neutrik EtherCon connectors with housing)
USB Memory Sticks: USB Hot Socket
Future USB options: USB device socket

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=25&productgroup=5&productgroupmain=1

ROBE Robin 600 LED Wash

ROBE

The ROBIN® 600 LEDWash is a powerful LED washlight with a total of 37x 10 Watt. The highlight - the device not only has a huge zoom range of 15°-60°. The colour mixing of the 4 colour multichip LED (RGB+W) is already done in the lens and thus enables a particularly homogeneous colour mixing.

The device has a high recognition value due to the arrangement of the LEDs in three concentric rings, which can be controlled separately via DMX 512.

Special features
No color shadows compared to other LED headlights
Stepless, motorized zoom from 15°-60°
3 separately controlled concentric rings for spectacular beam effects & chases
Spectacular stroboscope effects (also colored) at low power consumption
CTC Macro Channel
Various blackout modes
Pan/Tilt Speed channel
Strobe, RGB macros
16 bit channels for pan/tilt, dimmer, RGBW, zoom
Automatic position correction
Remote DMX reset, partial
DMX Analyzer
New RNS2 (ROBE Navigation System motion 2) with QVGA touchscreen
Battery buffered RNS 2
Gravity sensor for automatic display rotation
Service logbook with real-time clock for logging operating states
RDM (Remote Device Management)
Integrated microphone for Sound to Light effects
Fans, in zones, temperature controlled
Internal ArtNet to DMX converter
Automatic voltage adjustment 100-240 V
Software update via DMX 512
Operating hours counter

Optical system
Optics: fixed optical systems
Beam angle/zoom: 15°-60°, stepless, motorized

LED light sources
LEDs: 37x 10 W CREE RGBW Multichip
Colours: 37x red, 37x blue, 37x green, 37x white
Lifetime of LEDs: > 50.000 hours
Color mixing: RGBW + CTC

Temperature ranges
ambient temperature: +45°C
Operating temperature: +80°C
Cooling Fan temperature controlled

Effects
Shutter/Strobe: 1-20 flashes/sec (electronic), macros
Dimmer: 0-100% linear, 8/16-bit

Control & Programming
Protocol: USITT DMX 512 (RDM), ArtNet, MA Net, MA Net2
DMX 512 channels: 12/15/21/37/37 (5 modes)
Internal memory: motion 3 programmable sequences of 99 steps each
Test and demo programs, master/slave control
Pan-Tilt control: tracking and vector
Pan-Tilt Range: Pan 540°, Tilt 300°, 8/16-Bit, Macros
Menu display: VGA touch screen, blue backlit, battery buffered
DMX 512 connector: XLR 3 pin and XLR 5 pin ArtNet connector: RJ 45 EtherCon female

Technical data
Mains voltage 100-240 V 50/60 Hz
Current consumption 1.5 A at 230 V

Dimensions/Weight
Dimensions (L x W x H) 20.3 x 34.3 x 44.4 cm
Weight 10,6 kg

Mounting points
2 pairs of recordings for 1⁄4 Rotation Quick Locks

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=14&productgroup=5&productgroupmain=1

ROBE Robin 150 LED Beam

ROBE

The ROBE LEDBeam 150 is the successor of the ROBE LED Beam 100 but with zoom and a cluster of powerful multichips 30W RGBW LEDs. The spectacular zoom range from 3.8 ° to 60 ° uses an outstanding, custom-made optical system. A highly optimized motor control ensures fast pan and tilt movements. In addition to intensive strobe functions, the LEDBeam 150 also offers smooth 18-bit dimming including tungsten lamp effects. Simplified control via pre-programmed colors on a virtual color wheel and various stroboscope and pulse effects allow quick and easy programming.

Technical data

Light source
Illuminant type: 7x 30W RGBW Multichip
LED life expectancy: min. 20,000 hours
Typical luminous flux maintenance: 70% at 20,000 hours

Optical system
Robes own optical design
Highly efficient optical zoom system, ratio: 15.5 : 1
Zoom range: 3.8 ° - 60 ° Total luminaire lumen output: 2,842 lm
Light output: 12.200 lx @ 5 m

Dynamic effects
Color mixing mode RGBW or CMY
Variable CTO: 2.700K - 8.000K
Virtual color wheel: with 66 preset color fields
Tungsten lamp effect for white: 2,700K and 3,200K (redshift and thermal delay)
Motorized zoom
Preprogrammed random strobe and pulse effects
High resolution electronic dimming: 0 - 100%

Control and programming
Setting & Addressing: two-line LCD display & 4 control keys, stand-alone operation with 3 editable programs (each with up to 40 levels of motion)
Protocols: USITT DMX-512, RDM
Wireless CRMX ™ Technology from Lumen Radio (on request)
DMX protocol modes: 2
Control channels: 22, 16
Pan / Tilt resolution: 8 or 16 bit
RGBW or CMY: 8 or 16 bits
Zoom: 8 or 16 Bit
Dimmer: 8 or 16 bit (internal 18 bit)

Movement
Swivel movement: 450 °
Tilting movement: 228 °
Motion control: standard and speed
Controllable speed of the pan / tilt movement
Automatic pan / tilt position correction

Thermal specifications
Maximum ambient temperature: 45 ° C (113 ° F)
Maximum surface temperature: 80 ° C (176 ° F)
Minimum operating temperature: -5 ° C (23 ° F)

Electrical specifications and connections
Power supply: Electronic automatic range selection
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: max. 220 W
Input / output connection: Neutrik powerCON in / out
DMX and RDM data on / off: Locking 5-pin XLR

Mechanical specifications
Fixing points: 1 pair of 1/4 turn quick release fasteners 1x Omega adapter with quarter turn fasteners
Universal operating position
Fixing point for safety cable
Dimensions (WxDxH): 244x149x337mm
Weight: 5,7kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=805&productgroup=5&productgroupmain=1

ROBE 1200 Colorspot AT

ROBE

The ColorSpot 1200 AT is designed as the ultimate creative tool for large theatre, TV and live shows and for installations in multi-purpose venues and large clubs.

The fixture uses a powerful Philips 1200 SA discharge lamp lightsource. This is further boosted by a high quality super-efficient optical system, making the ColorSpot 1200 AT one of the brightest moving fixtures currently on the market.

Major features include a versatile CMY colour mixing system, variable CTO plus an additional colour wheel, 12 rotating indexable, replaceable dichroic glass gobos on two wheels offering 48 gobo combinations, iris, 4 rotating prisms and effects, variable frost, an incredibly flexible 13 – 42 degree linear zoom, remote focus, dimmer and shutter. Its progressive colour temperature correction system – from 5600K to 3200K is designed for use in television and film applications.

1200W Movinghead Spot

Dynamic effects:
Cyan: 0-100% Magenta: 0-100%
Yellow: 0-100%
CTO: 0-100%
color wheel: 6 exchangeable ″SLOT&LOCK″ color + open
Gobo wheel 1: 6 rotating, exchangeable ″SLOT&LOCK″ Dichroic glass gobos
Gobo wheel 2: 6 rotating, exchangeable ″SLOT&LOCK″ Dichroic glass gobos
Iris: Motor iris infinitely variable
Effect wheel: 4 rotatable, interchangeable ″SLOT&LOCK″ prisms and effects
Frost effect
Dimmer/Shutter
Focus: 2 m - infinity
Zoom: 13° - 42°
Pan: 530°
Tilt: 280°

Electrical specification:
Voltage: 208/230/250 V, 50/60 Hz;
Power consumption: 1600 VA at 230 V/50 Hz

Dimensions and weight
height: 619 mm
width: 536 mm
Depth: 616 mm
Weight: 51.5 kg

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=41&productgroup=5&productgroupmain=1

MARTIN Mac Aura XB

MARTIN

The Martin Mac Aura XB is the more powerful version of the well-tried Mac Aura.

Technical data
Power (watts) 400 LED equipment (watts)15 watts RGBW
Headlight type Beam Movinglight
Zoom 10° - 60°
Photometric data
Total luminous output (wide) motion 6.0 Klm
Total luminous output (narrow): 4.3 Klm
Connection Neutrik Powercon
IP protection class IP20
DMX mode- 14 or 25 channels

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=354&productgroup=5&productgroupmain=1

HIGH END Showgun

HIGH END

BeamShow lamp

Illuminant MSR 2000/SE
DMX connection 5pin
Gobo size 64.9 mm
Power connection Schuko
Power consumption 2800 W
Weight 63,5 kg
Special Feature: LED multicolor ring

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=37&productgroup=5&productgroupmain=1

JB Lighting Varyscan P7

JB Lighting

With the incredibly low LED power consumption of 270W, the P7 achieves a brightness comparable to a 700W discharge lamp. This enormous light output is due to the moving light's excellent optical characteristics and high-tech cooling. The LED light source keeps the colour temperature constant over the entire life of 20,000h. An unattractive drifting into the green is therefore a thing of the past.

The P7 offers a whole range of functional highlights. Starting with the impressive optical zoom system, which covers a range of 8-48°, through CMY colour mixing, up to the user-friendly full range of effects. More compact than a conventional 250W spotlight, two spotlights in a flightcase have a packing size of only 60 x 60 x 80 cm. It has a shapely design and is in handling a similar revolution as the LED-Washlights from JB-Lighting.

The P7 is the lighting solution for all those who want to retire their aging spots of the 700 watt or 800 watt class.

Optics and light source
270W white light LED module
20.000h service life
Zoom range: 8°-48°, 1:6

Effects
1 gobo wheel with 9 static interchangeable gobos + open
Gobo wheel pass with variable speed
1 gobo wheel with 6 rotating, positioning and exchangeable gobos + open;
CMY colour mixing unit for fast and even colour mixing
1 colour wheel with 8 full or half colours + open, linear colour selection;
Rainbow effect with different speeds
Artificial light filter
Motorized infinitely variable high-speed iris
3-fold prism, rotatable and indexable
- Stepless frost effect 5°, interchangeable (optional 10°, 20°) with pre-programmed functions;
Dimmer 0%-100% - Shutter up to 20Hz with preprogrammed pulse and ramp functions;
Sparkle effect
Zoom 8°-48°
Focus
Special screen for logo projection

Drive
High resolution, powerful 3-phase stepper motors
Precise and extremely fast movements
433° Pan / 280° Tilt

Control and programming
Protocol: USITT DMX-512
JB-Lighting Wireless DMX as standard
Stand alone mode with 20 steps
Master/Slave function
Error analysis and DMX analysis

Mechanical construction
Original JB-Lighting slide-in technology
Robust, roadworthy construction
Transportation lock
Fan control for noise-optimized work
Graphic display, electronically rotatable
Neutrik 3pin and 5pin XLR in/out
Neutrik PowerCon in/out

Rigging
2 Omega brackets for quick and convenient mounting in any position, with four different mounting options

Electrical specification
Maximum power consumption 380VA
Supply voltage 100V-240V, 50/60Hz

Dimensions and weight
Dimensions: W 380 x H 580 x D 264mm
Weight: 17kg

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=402&productgroup=5&productgroupmain=1

MARTIN MAC 700 Profile

MARTIN

The MAC 700 Profile is a compact, high performance fixture with excellent brightness and optical quality. It features a CMY color mixing system, an 8-position color wheel and an animation system for theatrical projection effects. It also has an iris, static gobos, rotating gobos and a zoom system. Features
700 W discharge lamp with short arc
Subtractive CMY colour mixing system
Colour wheel with 8 positions plus open
Motorized zoom and focus lens
Mechanical dimmer
Gobo animation wheel with control of the direction and angle of rotation;
9 static, 6 rotatable and indexable gobos plus open;
Rotatable and interchangeable 3-fold prism
Motorized iris diaphragm
Strobe effect from 2 - 10 Hz, pulse effects, immediate opening and closing;
Pan / tilt range 540° / 246°
Temperature controlled fan cooling for quiet operation;
Modular design for easy maintenance and repair;
Electronic ballast for hot ignition and flicker-free operation;

Dimensions and weight
Length: 450 mm
Width: 365 mm
Height: 636 mm (head facing upwards)
Weight: 34,5 kg

Light source
Type: 700 W discharge lamp with short arc;
Approved lamp: Osram HTI 700/D4/75

Dynamic effects
- Colour mixing: CMY, independently adjustable, 0 - 100%
Color wheel: 8 interchangeable dichroic color filters (6 colors and 2 CTC) + open, indexing, continuous rotation, random color selection;
Rotating gobo wheel: 6 positions + open, indexing, continuous gobo rotation with variable speed;
Fixed gobo wheel: 9 interchangeable gobos + open, indexing, continuous rotation, random gobo selection;
Gobo animation: Interchangeable animation wheel, indexing or continuous rotation at different angles, speed and direction;
Prism: Rotatable, exchangeable 3-fold prism
Iris diaphragm: 0 - 100%, pulse effects
Mechanical dimmer: 0 - 100%
Shutter: flash effect 2 - 10 Hz, uniform or random pulsating open / close, 8 bit resolution;
Focus lens: 2m to infinity
Zoom lens: 16°-30°, light-dark border, with diffuser;
Pan: 540°
Tilt: 246°

Gobos
Outside diameter: 27.9 mm +0 / -0.3 mm
Maximum motif diameter: 23 mm
Maximum thickness: 1.1 mm in static positions, 4 mm in rotating positions;
Recommended glass quality: high temperature borofloat or better with dichroic or reinforced aluminium coating;
Recommended metal quality: 0.5 mm aluminium

Gobo animation wheels
Outside diameter: 116 mm +0/-0,25 mm
Outer motif diameter: 112 mm
Inner motif diameter: 32 mm
Construction: 0.5 mm aluminium, with holding magnet

connections
Mains connection: 3 m 3-pole mains cable without mains plug
Data input/output: lockable XLR connectors, 3-pin and 5-pin;

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=27&productgroup=5&productgroupmain=1

GLP JDC1 LED Strobe

GLP

JDC1 delivers exactly what a strobe must deliver: pure power. But it also completely redefines the subject of stroboscopes. A hundred percent hybrid in every respect!

At the heart of JDC1 is an LED array modeled on a classic discharge tube. With its incomparable white and brilliant light, it is in no way inferior to a conventional stroboscope. For this purpose JDC1 has 1,440 ultra-bright RGB LEDs above and below the tube, filling the entire format - and providing previously impossible and stunning effects.

Both light sources can be controlled independently of each other and thus work either as a single unit or as two completely different light sources - the creative possibilities are virtually unlimited. Continuous operation as a blind is possible without any problems for both the LED tube and the LED panels.

And even more - both light sources can be divided into individual sections and controlled separately with any appropriately equipped controller - up to pixel mapping.

For even more creativity and even more individual looks, JDC1 provides a motorized tilt of 190 degrees and a resolution of 16 bit - so the punch is guaranteed to always arrive exactly where it is supposed to.

Technical data

Strobe Panel LEDs
LED type: Osram LRTB GVTG
LED quantity: 1320
LED colors: RGB
LED segments: 12 (2 x 6)

Strobe Tube LEDs
LED type: CREE XP L LED
LED quantity: 288
LED Colours: Cool White
Segments: 12

Movement
Resolution: 8 - 16 Bit
Position Feedback: yes
Tilt (degrees): 190°

Connections
Signal connection: XLR 5-pin input & output
Mains connection: Neutrik PowerCon input & output

Operating parameters
Mains voltage: 100-240 VAC / 50-60Hz
Power (Watt @ 230V): 1200
Fuse: 20mm T 8A
Max. ambient temperature: 40°C / 104°F
Operating position: any

Dimensions & Weight
Depth of the base area: 150 mm / 5.9 in
Width of the base area: 390 mm / 15.3 in
Height (head vertical): 251 mm / 9.8 in
Weight: 11.6 kg / 25.6 lbs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=357&productgroup=5&productgroupmain=1

GLP Impression X4S

GLP

The impression X4 S is equipped with 7 RGBW high-power LEDs (á 15 Watt) and a 7°- 50° zoom lens. The optics, originating from the Impression X4, convince with a clearly defined hard beam in the lower zoom range and are absolutely homogeneous and soft in the middle and upper zoom range. All this without disturbing stray light.

With the X4S, emphasis was placed on a compact housing and a fast pan/tilt movement.

Technical data:

LED light source
LED Type - Osram Ostar
Service life (hours) - 50.000
LED quantity - 7
LED Colors - RGBW

optics
minimum zoom (degrees) - 7
maximum zoom (degrees) - 50

Movement
Resolution - 16 Bit
Pan (degrees) - 630°
Tilt (degrees) - 220°

Control
Control modes - Normal, Compressed, HighRes
Display - Backlit graphic LCD
Protocol(s) - USITT DMX-512

cooling
Temperature controlled
Overheating protection

effects
Dimmer - 0-100% electronic
Shutter - max. 10 Hz
Color correction - electronic 2.500 K - 10.000 K
Internal effects - LED macro effects, color presets

connections
Signal connection XLR 5-pin, XLR 3-pin In/Out
Power supply Neutrik PowerCON In/Out

operating parameters
Mains voltage 100-240 VAC / 50-60Hz
Power (Watt @ 230V) 200
Fuse 20mm T 5A
Max. ambient temperature 45°C / 115°F
Operating position any

dimensions & weight
Depth of the base 165.5 mm / 6.5 in
Width of the base area 224 mm / 8.8 in
Height (head vertical) 324 mm / 12.7 in
Weight 5.5 kg / 12.1 lbs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=432&productgroup=5&productgroupmain=1

GLP Impression X4 Bar 20

GLP

The GLP impression X4 Bar 20 is a powerful LED bar that offers the lighting designer creative freedom for multiple applications...

The optical system is derived from the tried and tested impression X4 headlamps and thus offers the usual sharp and homogeneous image quality of the entire X4 series. The X4 Bar with 20 RGBW LED engines of 15 Watts each have a zoom range of 7 to 50 degrees.

In addition, the X4 Bars feature a motorized tilt for smooth to dynamic movements in one axis of motion.

An individual control for each LED is a matter of course, as are the constant distances between the individual engines, which make a seamless sequence of the bars possible without any problems.

The windscreen is available in a clear and a frosted version and can be changed in a few easy steps-

Light source
20 High-Power RGBW LEDs
50,000 hours service life

Optics
Motorized High-Speed Zoom
Zoom range: 7° - 50°
Highly efficient optics
exchangeable spreading discs

Movement
high-resolution 3-phase stepper motor control
8 or 16 bit resolution selectable
maximum speed: 210° tilt in 1.5 sec
Position Feedback

Shutter / Dimmer

Dimmer: 0 - 100%
Shutter: 1 - 10Hz
Random strobe effect
Pulse effects

Control system
DMX-512 protocol
Pixel control:
Free control of each pixel in color and intensity
Internal LED Macros
RDM (Q1/2015)
Internal color presets and variable CTO control from 2,500K-10,000K

quiet, temperature-controlled fan cooling
Convection cooling possible if required
illuminated graphic LCD
Self-charging buffer battery
Overheating protection

Operating parameters
Mains voltage: 100-240 V AC / 50-60Hz
Fuse: Microfuse 20mm, T 5A
Maximum ambient temperature: 45°C
Protection class: IP40

Connections
DMX: XLR 5pin
Mains voltage: Neutrik Powercon (In & Out)

Dimensions & Weight
1000 mm x 240 mm x 100 mm
39.4 x 9.4 x 3.9 inches
Weight 14,5 kg / 32 lbs

Mounting
Omega-Bracket
fixing points
Eyelet for safety fastening
Vertical standing: rubber feet
Hanging: M10 thread with non-rotating mounting position for half-couplers, etc.
Seamlessly stringing together several bars while maintaining the pixel spacing

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=255&productgroup=5&productgroupmain=1

GLP Impression X4L

GLP

No less than 55 RGBW LEDs (á 15 Watt), coupled with the highly efficient 7° - 50° zoom lens, make the impression X4 XL unique and incomparable on the lighting market.

The optics, which were used for the first time in the impression X4, allow a clearly defined hard beam to be displayed in the lower zoom range, while remaining absolutely homogeneous and soft in the medium and upper zoom ranges. All this without any disturbing stray light. A further highlight is the shapely housing, which - as is usual with the impression series - does not have a disturbing base.

RGBW colour mixing, infinitely variable CTO and very finely tuned dimming behaviour are standard features of the impression X4 XL. The individually controllable LEDs can be used to display various patterns such as arrows, numbers or letters. The integrated pattern mode gives the designer all the freedom he needs.

LED light source
LED type: Osram Ostar
Lifetime (hours): 50.000
LED quantity: 37
LED colours: RGBW

optics
minimum zoom (degrees): 7°
maximum zoom (degrees): 50°
Beamshaper: motorized

Movement
Resolution: 8- 16 Bit
Position Feedback: yes
Pan (degrees): 660°
Tilt (degrees): 250°

Control
Control modes: Normal, Compressed, HighRes, Pixel-Mapping
Display: Illuminated graphic LCD Self-charging buffer battery, illuminated keys
Protocol(s): DMX-512, RDM
RDM: Bidirectional communication
Cooling:Temperature controlled, overheating protection

effects
Dimmer: 0-100% electronic
Shutter: max. 25 Hz electronic
Color correction filter: electronic 2.500 K - 10.000 K
Internal effects: LED Macro Effects

connections
Signal connection: XLR 5-pin input & output
Mains connection: Neutrik PowerCon

operating parameters
Mains voltage: 100-240 VAC / 50-60Hz
Power ( Watt@230 ): approx. 650
Fuse: 20mm T 5A
Max.ambient temperature: 45°C / 115°F
Operating position: any

installation
Standing: Removable stand with eyelets for ratchet straps
Hanging (horizontal): adjustable rail for lateral truss mounting (optional)
Hanging (vertical): thread M10 with non-rotating mounting position for half coupler
Safety fastening: 2 eyelets

Dimensions & Weight
Depth of the base area: 430 mm / 16.9 in
Width of the base area: 185 mm / 7.3 in
Height: (head vertical): 530 mm / 20.9 in
Weight: 17 kg / 37.5 lbs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=347&productgroup=5&productgroupmain=1

GLP Impression X4 Bar 10

GLP

The GLP impression X4 Bar 10 is a powerful LED bar that offers the lighting designer creative freedom for multiple applications.

The optical system is derived from the tried and tested impression X4 headlamps and thus offers the usual sharp and homogeneous image quality of the entire X4 series. The X4 Bar with 10 RGBW LED engines of 15 Watts each have a zoom range of 7 to 50 degrees.

In addition, the X4 Bars feature a motorized tilt for smooth to dynamic movements in one axis of motion.

An individual control for each LED is a matter of course, as are the constant distances between the individual engines, which make a seamless sequence of the bars possible without any problems.

The front windscreen is available in a clear and a frosted version and can be changed in a few easy steps.

Light source
10 High-Power RGBW LEDs
50.000 hours lifetime

Optics
Motorized High-Speed Zoom
Zoom range: 7° - 50°
Highly efficient optics
exchangeable spreading discs

Movement
high-resolution 3-phase stepper motor control
8 or 16 bit resolution selectable
maximum speed: 210° tilt in 1.5 sec,
Position Feedback

Shutter / Dimmer
Dimmer: 0 - 100%
Shutter: 1 - 10Hz
Random strobe effect
Pulse effects
Control system
DMX-512 protocol
Pixel control: Free control of each pixel in color and intensity
Internal LED Macros
RDM (Q1/2015)
Internal color presets and variable CTO control from 2,500K-10,000K
. quiet, temperature-controlled fan cooling
Convection cooling possible if required
illuminated graphic LCD
Self-charging buffer battery
Overheating protection

Operating parameters
Mains voltage: 100-240 V AC / 50-60Hz
Fuse: Microfuse 20mm, T 5A
Maximum ambient temperature: 45°C
Protection class: IP40

Connections
DMX: XLR 5pin
Mains voltage: Neutrik Powercon (In & Out)

Dimensions & Weight
500 mm x 240 mm x 100 mm
19.7 x 9.4 x 3.9 inches
Weight 8 kg / 17.6 lbs

Mounting
Omega-Bracket
fixing points
Eyelet for safety fastening
Vertical standing: rubber feet
Hanging: Thread M10 with non-rotating mounting position for half coupler
Seamlessly stringing together several bars while maintaining the pixel spacing

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=254&productgroup=5&productgroupmain=1

AYRTON MagicBlade-R

Ayrton

FEATURES:

- 15W Osram Ostar RGBW LEDs high quality
- 67mm optics
- 4,5° aperture
- high color quality
- flicker free
- endless rotation for Pan and Tilt
- European engineering

OPTICS
- 67mm PMMA optics
- 4,5° aperture
- high degree of efficiency (85%)

LIGHT SOURCE
- 7x 15W RGBW Multi-Chip LED (single pixel)
- 2.500 lm light output
- 380.000 cd luminous flux
- flicker free, especially for HD TV

COLOURS
- RGBW
- homogene lightbeam
- no colour shadows
- deep colours
- dynamic color- and effectmacros with variable speed

DIMMER / STROBE
- Dimmer from 0-100%
- Strobe effects with 1-25 flashes/sec

SOFTWARE
- local DMX adressing possible
- big amount of integrated effects
- clearly structured menue

HARDWARE
- endless rotaion for Pan- and Tilt
- 8 oder 16 Bit
- automatic fan speed
- IP20

CONTROL
- DMX-connection XLR 5pin in/out
- integrated LumenRadio Wireless DMX-receiver
- RDM compatible
- stand-alone and Master/Slave Modi
- Artnet and KlingNet protocoll over 2 RJ45 IP65 connections
- 3 DMX Modi (from 18 till 44 DMX chanels)

POWER SUPPLY
- electronic ballast
- operating voltage: 110 - 240 Volt – 50/60Hz
- power consumption: 200W, max.
- power connection: IP65 PowerCON TRUE1 in/out

CASING COLOR
- black

MEASUREMENTS
- fixture: 571 x 266 x 184 mm
- flightcase foam: 560 x 180 x 560 mm

WEIGHT
- 11,2 kg

Source: https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=40&productgroup=0&productgroupmain=0

AYRTON Perseo-S IP65

AYRTON

The Perseo is Ayrton's first IP65 rated LED profiler. The 500W white light engine achieves an output of 27,000 lumens at a colour temperature of 6,500 K. The sophisticated optical system with a 148mm front lens includes a total of 13 high quality lenses that allow an 8:1 zoom with a beam angle of 7°-56° and provide a smooth beam without a hotspot. The Perseo features a CMY colour mixing system, a variable CTO and a complementary colour wheel for an almost infinite range of rich colours and pastels.

Individual shading with highest precision is possible with the 4-way iris slide system. The Perseo runs particularly stable and quietly due to its highly efficient phase-change liquid cooling system with heat pipe and IP68 certified fans. The effects section includes two gobo wheels with HD glass gobos: one with seven rotating and positionable gobos and one with eleven fixed gobos. The Animation Wheel allows dynamic and continuous effects. Two frost filters, one iris and two prisms are also available. The compact dimensions and the elegant design with high light output as well as the extensive equipment make the Perseo the perfect all-rounder.

TECHNICAL DATA
- Colour: black
- Operating voltage/ supply voltage: 100-240V
- Mains frequency: 50Hz, 60Hz
- Power: 900W
- Power of the illuminant: 500W LED
- Colour temperature: 6.500K
- Beam angle/zoom: 7°-56°
- Connectors on the input side: powerCON TRUE1, etherCON, XLR 5
- Connectors on the output side: etherCON, XLR 5
- Gobo wheel 1: 7 gobos + open, rotatable, changeable
- Gobo wheel 2: 11 gobos + open, static, exchangeable
- CMY colour mixing system 1
- Colour wheel: 16 colors + OpenCTO infinitely variable
- Iris: 1
- Prism: 5-fold, 4-fold, rotatable and indexable
- Frost filter: 2 (light / strong)
- Animation Wheel 1 rotatable
- Orifice slider: 4, completely closing
- Pan/Tilt: 540°/270°
- Dimensions: 490 x 710 x 329mm
- Weight: 38,8kg
- IP classification: IP65

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1409&productgroup=5&productgroupmain=1

AYRTON Bora-TC

AYRTON

Ayrtons Bora is a washlight with a 750W white light engine. Equipped with a spherical 178mm front lens and a highly efficient optical system, the Bora is specially designed for wash applications. It offers an 8:1 zoom with beam angles of 8°-64° and an extremely homogeneous colour mixture. The Bora-TC offers best colour reproduction values with a CRI > 90 and extremely high TM30 values. Its LED engine is calibrated to 6.000K. The extensive features include a CMY color mixing system, two color wheels, a stepless CTO, a rotatable 4-way iris system, a rotatable gobo wheel, a linear frost filter and an iris. In addition to the new liquid cooling system, the Bora-TC also has a power supply with power factor compensation.

Special properties:
- 8:1 zoom with 8° - 64°
- Rotatable 4-way orifice slider unit with full-field framing
- CMY colour mixing system, 2 colour wheels with six fixed colours
- Variable CTO, linear frost, rotating gobo wheel, iris
- Whisper quiet operation
- Elegant design
- Flicker-free
- High colour rendering index

TECHNICAL DATA:
- Operating voltage/ supply voltage: 120-240V
- Mains frequency: 50Hz, 60Hz
- Power: 1150W
- Power of the lamp:750W
- Colour temperature: 6.000K
- Beam angle/zoom: 8°-64°
- Connectors on the input side: powerCON TRUE1, etherCON, XLR 5
- Connectors on the output side: etherCON, XLR 5
- Gobo wheel 1: 6 gobos + open, rotatable, changeable
- CMY colour mixing system: 1
- Colour wheel 1: 6 colours + Open
- Colour wheel 2: 6 colors + Open
- CTO: continuous Iris: 1
- Frost filter: 1
- Orifice slider: 4, completely closing
- Pan/Tilt: 540°/270°
- Dimensions: 494 x 737 x 280mm
- Weight: 37,8kg
- IP classification: IP20

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1408&productgroup=5&productgroupmain=1

AYRTON Khamsin-S

AYRTON

The Khamsin opens up completely new possibilities for creative development with its versatility and unbelievably compact dimensions. Like all devices of the Ayrton product line, the Khamsin is also available in two versions: The Khamsin-S is designed for scenic applications. The new LED module offers pure white light with a colour temperature of 6,500K and a record output of 40,000 lumens. The optical system with a 158mm front lens provides an 8:1 zoom range with beam angles of 7°-58° and ensures a uniform light image without a hotspot. Fully equipped, the Khamsin features a CMY color mixing system, a variable CTO and a complementary color wheel with six fixed colors, a rotatable 4-way iris slider unit, two indexable and rotatable gobo wheels with six interchangeable HD glass gobos each, an endless rotating effects wheel, two variable frost filters, a 15-blade iris as well as a 5-facet round prism and a 4-facet line prism.

OPTICS
- Motorized, fast and linear 8:1 zoom with 7°-58°
- Anti-reflective 158mm front lens
- High optical efficiency

SOURCE OF LIGHT
- 60,000 lm Light output (Output: 40,000 lm)
- 8,000 K White light LED engine (output: 6,500 K)
- CRI > 70
- flicker-free, especially for HD TV

COLOURS
- CMY colour mixing system
- Variable CTO to adjust the color temperature
- Color wheel with six fixed colors and a CTB filter
GOBOS
- Two indexable and rotatable gobo wheels, each with six HD glass gobos plus open
- Diameter: Gobo 34mm, Image 25mm, thickness 1,1mm

FRAMING
- Four individually positionable shutters, completely passable
- Rotation of the framing module: +/- 45°

IRIS
- Fast iris with adjustable, dynamic effects
- Iris Range: 15% - 100% open

EFFECTS
- Graphic animation effect wheel with endless rotation in both directions
- Two rotatable and indexable prisms: 5 facets round, 4 facets linear
- Soft-edge and hard-edge frost filters

DIMMER / STROBE
- Dimmer from 0-100% without colour change
- Strobe effect with 1-25 flashes/sec

SOFTWARE PROPERTIES
- Local DMX addressing
- Remote addressing via standard RDM DMX controller
- Information menu including operating hours counter, temperature, software version and others
- Clear menu control

HARDWARE PROPERTIES
- 540° PAN, 280° TILT
- 8 or 16 bit resolution
- High-resolution stepper motors for smooth movements and accurate positioning
- Automatic PAN and TILT repositioning
- Automatically controlled cooling with overheating protection
- IP20

CONTROL
- DMX connection via XLR 5pin in/out
- RDM compatible
- Integrated LumenRadio DMX-RDM Wireless Receiver
- ArtNet via RJ45 connection in/out
- Built-in graphic display with clickable control wheel
- 3 DMX modes (from 39 to 63 DMX channels)

POWER SUPPLY
- Electronic power supply unit with power factor correction (PFC)
- Supply voltage: 110 - 240 Volt - 50/60Hz
- Power consumption: max. 1.150W
- Mains connection: PowerCON TRUE1
- DIMENSIONS 494 X 778 X 280 mm (LxHxW)

WEIGHT
39.8 KG

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=932&productgroup=5&productgroupmain=1

GLP Impression FR1

GLP

The GLP impression FR1 is one of the most compact moving heads available today and offers a new benchmark in versatility and quality. Equipped with a single powerful, homogenized 60-Watt RGBW LED, the impression FR1 achieves color mixing based on a broad spectrum.

The expressive, crisp coloured or pure white beam can be freely adjusted in colour temperature from 2,500 to 10,000 Kelvin via a separate CTC channel. The optical quality of the impression FR1 is of paramount importance and ensures that the beam remains clean, homogeneous and clearly defined in the narrowest of areas over the entire zoom range. Thanks to this consistent focus and the attention to detail that GLP is known for, the field of application of the impression FR1 also extends to a wide range of applications that demand uncompromising quality.

A super-fast zoom, with a beam angle of 3.5 to 34 degrees, allows full control over short and long ranges. Thanks to its strength, the impression FR1 can also be used for lighting tasks over long distances. With quality comes accuracy, and this continues in the impression FR1 with 16-bit dimming and 16-bit positional accuracy in a range of 540 degrees pan and 220 degrees tilt. In addition, the impression FR1 also offers continuous pan rotation in both directions and a full range of speeds from slow and smooth to extremely fast. A variety of dimming curves, complete PWM control and many other settings are available via the intuitive device menu, with the most important functions also accessible via DMX.

Of course, the impression FR1 features the baseless design known from GLP. Thanks to Power In/Out, several devices can be easily wired. Rubber feet under the base ensure easy installation on the floor and the integrated threaded inserts and safety points provide the necessary flexibility for safe suspended mounting.

The impression FR1 offers an outstanding combination of quality, performance, compact design and features - with that extra kick when it counts.

Technical data

LED light source
LED type Osram Ostar
Lifetime (hours) 50.000
LED quantity 1
LED colours RGBW
CRI (Ra)80 TLCI80 TM30-1577/106

Optical system
minimum zoom 3.7°
maximum zoom 35°
Zoom ratio 10:1

Dynamic effects
Dimmer / shutter 0 - 100% electronic
Shutter electronic max. 25 Hz
Electronic colour correction 2.500 - 10.000 K
Internal Effects Color Presets
Color mixing RGBW

Movement
Resolution 8 - 16 Bit
Position Feedback yes
Pan (degrees) 540°
Tilt (degrees) 220°
Continuous movement 360° Pan

Control & Programming
Control-Modes Normal
Display illuminated graphic LCD
Protocol(s) DMX (USITT DMX512-A)
Cooling temperature controlled Overheating protection

Connections
Signal connection XLR 5-pin
power connector Neutrik PowerCON

Operating parameters
Mains voltage 100 - 240 VAC / 50 - 60 Hz
Power (Watt @ 230V)85 Fuse 20mm T 5A Max.
Ambient temperature 45°C / 115°F
Operating position any

Installation
Standing rubber feet
Hanging (vertical) thread M10 with non-rotating mounting position for halfcoupler
Safety fastening 2 eyelets

Dimensions & Weight
Height (head vertical)264 mm / 10.4 in
Width (arm to arm)190 mm / 7.5 in
Depth (head vertical)140 mm / 5.5 in
Weight4 kg / 8.8 lbs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=935&productgroup=5&productgroupmain=1

AYRTON Bora-S

AYRTON

Ayrtons Bora is a washlight with a 750W white light engine. Equipped with a spherical 178mm front lens and a highly efficient optical system, the Bora is specially designed for wash applications. It offers an 8:1 zoom with beam angles of 8°-64° and an extremely homogeneous colour mixing. The Bora-S is calibrated to 6,800K and delivers pure white light with an enormous output of 42,000 lumen. The extensive features include a CMY color mixing system, two color wheels, a stepless motion CTO, a rotatable 4-way iris system, a rotatable gobo wheel, a linear frost filter and an iris. Special properties:
- 8:1 zoom with 8° - 64° - Rotatable 4-way orifice slider unit with full-field framing
- CMY colour mixing system, 2 colour wheels with six fixed colours
- Variable CTO, linear frost, rotating gobo wheel, iris
- Whisper quiet operation
- Elegant design
- Flicker-free
- High colour rendering index

TECHNICAL DATA:
- Operating voltage/ supply voltage: 120-240V
- Mains frequency: 50Hz, 60Hz
- Power: 1150W#
- Power of the illuminant: 750W
- Colour temperature: 6.800K
- Beam angle/zoom: 8°-64°
- Connectors on the input side: powerCON TRUE1, etherCON, XLR 5
- Connectors on the output side: etherCON, XLR 5
- Gobo wheel 1: 6 motion gobos + open, rotatable, changeable
- CMY colour mixing system: 1
- Colour wheel 1: 6 colours + Open
- Colour wheel 2: 6 colors + Open
- CTO: infinitely variable
- Iris: 1
- Frost filter: 1
- Orifice slider: 4, completely closing
- Pan/Tilt: 540°/270°
- Dimensions: 494 x 737 x 280mm
- Weight: 37,8kg
- IP classification: IP20

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1407&productgroup=5&productgroupmain=1

AYRTON Diablo-S

AYRTON

With the Diablo, Ayrton presents one of the smallest, lightest and most efficient devices in its class. The output of 19,000 lumens with motion and a total weight of only 21.8 kg masters even highly professional requirements. The aperture sliders of the rotatable 4-way framing system can be accurately positioned and completely closed via two axes. The highly developed optical system, with its 119mm front lens, allows an 8:1 zoom with beam angles of 6.7° - 53° and ensures an even beam without hotspot. The Diablo-S is designed for stage applications and is trimmed for high output with the LED engine calibrated to 7,000K. Thanks to the clever cooling system with heatpipe, the Diablo is whisper quiet and is also excellent for studio and theatre applications.

Special properties:
- Homogeneous illumination without Hot-Spot
- 8:1 zoom with 6.7° - 53°
- Rotatable 4-way full-field framing system
- CMY colour mixing system, colour wheel, variable CTO
- Gobo wheel, iris, prism, animation wheel
- Hard-Edge Frost Filter
- Whisper quiet operation
- Elegant design
- Flicker-free
- High colour rendering index

TECHNICAL DATA:
- Operating voltage/ supply voltage: 100-240V
- Mains frequency: 50Hz, 60Hz
- Power: 550W
- Power of the illuminant: 300W
- Colour temperature: 7.000K
- Beam angle/zoom: 6.7°-53°
- Connectors on the input side: powerCON TRUE1, XLR 5
- Connectors on the output side: powerCON TRUE1, XLR 5
- Gobo wheel 1: 7 gobos + open, rotatable, changeable
- CMY colour mixing system: 1
- Colour wheel 1: 7 colors + Open
- CTO: infinitely variable
- Iris: 1
- Prism: 5-fold, rotatable and indexable
- Frost filter: 1
- Animation Wheel: 1 rotatable
- Orifice slider: 4, completely closing
- Pan/Tilt: 540°/270°
- Dimensions: 365 x 591 x 212mm
- Weight: 21,8kg
- IP classification: IP20

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1406&productgroup=5&productgroupmain=1

GLP GT-1

GLP

The GT-1 from GLP is a true hybrid headlamp, it meets the highest performance requirements both as a spot and beam lamp. Using a 470 watt high-performance discharge lamp, its high-quality optical system produces a beam that is impressive with an enormous zoom range of 2.5° to 55° (ratio 22:1).

In spot mode, the GT-1 offers a wide range of effects including CMY colour mixing, eight rotating gobos, 14 fixed gobos, pinholes to reduce beam diameter and a replaceable animation wheel. But that's not all: the GT-1 has three different rotating prisms, a fixed colour wheel with CTO / CTB filter and a frost filter.

In beam mode, the GT-1 produces an extremely parallel beam through the large 145mm diameter front lens, which is bright and consistent over long distances.

The GLP GT-1 features a unique --baseless design-- wireless DMX, full 16-bit pan and tilt, shutter, dimmer, a built-in battery for easy setup, and of course a light weight of only 25kg, as usual with GLP products. All this makes the GT-1 an extremely versatile product for a wide range of applications.

TECHNICAL DATA

light source / lamp type
OSRAM SIRIUS HRI 440W
Service life (hours) 1,500 h
Colour temperature 7300 Kelvin

Optics
minimum zoom (degrees) 2.5
maximum zoom (degrees) 55

Focus
motorized 2m - infinite
Beam mode 2.5°

Movement
Resolution 8 - 16 Bit
Position Feedback
Pan (degrees) 540°
Tilt (degrees) 280°

Control system
Control modes Compressed / HighRes
Display - Backlit graphic LCD
Intuitive TouchWheel Control
Self-charging buffer battery
Automatic orientation of the display

Protocol(s)
ArtNet DMX-512
RDM Wireless lumen radio CRMX DMX/RDM Bidirectional communication

Cooling
Temperature controlled
Overheating protection

Effects
Dimmer 0-100% electromechanical
Shutter electromechanical
Effect wheel - exchangeable - rotatable and indexable
Frost
Prism 3-fold, 8-fold, 6-fold linear, slow to very fast rotation
Gobo wheel 1, 8 gobos, rotatable and indexable, exchangeable, Dicro-colour gobos
Gobo wheel 2, 14 fixed metal gobos plus 6 different pinholes
Color correction filter, mechanical, CTO 2.500 K, CTB 9.000 K
Color wheel, 11 dichroic color filters, CTB filters, CTO filters
Colour mixing CMY & solid colours

Connections
Signal connection XLR 5-pin input & output, XLR 3-pin input & output
Mains connection Neutrik PowerCon
Operating parameters
Mains voltage 100-240 VAC / 50-60Hz
Power (Watt @ 230V)720 Watt
Fuse 20mm T 8A
Max. ambient temperature 45°C / 115°F
Operating position any

Installation
Standing Removable stand with eyelets for ratchet straps
Hanging (horizontal)
adjustable rail for lateral truss mounting (optional)
Hanging (vertical) thread M10 with non-rotating mounting position for halfcoupler
Omegabrackets
Safety fastening 2 eyelets

Dimensions & Weight
Depth of the base area 229 mm / 9 in
Width of the base 472 mm / 18.6 in
Height (head vertical) 618 mm / 24.3 in
Weight 25 kg / 55 lbs

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=275&productgroup=5&productgroupmain=1

AYRTON Mistral-TC

CLAY PAKY Scenius Profile

CLAY PAKY

The Scenius Profile features the same impressive white light qualities as the spot version. Its 1,400W discharge lamp, developed by Osram in close cooperation with Clay Paky specifically for use in the Scenius, offers an average colour temperature of 6,500K, achieves a CRI greater than 90 thanks to its wide spectrum and has a luminous efficacy that is significantly higher than that of 1,500W lamps. In addition, the Scenius Profile has a +/- 45° rotatable f-stop module with four completely closing f-stops. Furthermore, the device can be operated in 1,200W low-noise mode, making it ideal for use in noise-sensitive applications such as TV or theatre. In terms of colours, the Scenius has CMY colour mixing as well as a colour wheel with seven fixed colours and a linear CTO filter. Thus the Scenius meets all requirements, from pastel shades to rich full colours. In addition, the specially developed flat reflector enables an enormously homogeneous image. For applications that require even higher light output, the Scenius spot reflector can also be optionally installed. A zoom of 7°-48° with autofocus, two gobo wheels (one rotatable, one fixed) with interchangeable gobos, a rotatable prism, an extremely precise dimmer (0-100%) and an iris complete the Scenius's range of functions.

4 completely closing orifice plate slides
Very high colour rendering index (> 90)
Illuminant power 1.400W (6.500K)
7° to 48° Zoom
2 gobo wheels
CMY colour mixing
1 colour wheel with 7 fixed colours
Linear CTO
1 rotating prism
2 frost filters

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=400&productgroup=5&productgroupmain=1

CLAY PAKY Mythos 2

CLAY PAKY

Mythos 2 is an excellent spotlight that produces a large beam with a zoom of 4° to 50° (ratio 1:12). The light beam is sharp, with perfectly defined edges, from the first millimetres after the front lens over its entire length. The zoom is optimized for focusing, which is separate from that of fixed and rotating gobos. Its movements are smooth, fast and very quiet. Mythos 2 also has an indexed visual effect screen that can be superimposed on all the gobos both inside and outside the focus. It is also an exceptional beam light that allows you to switch to a fixed minimum beam angle of just 2.5°. A large, very dense beam of light with a diameter of 160 mm leaves the front lens of the Myth and remains parallel over its entire length, even over long distances.

Features br>> HRI 440W discharge lamp
Large front lens with 160 mm diameter Electronic focusing for a perfectly sharp light beam over the entire length
Electronic zoom 4 degrees 50 degrees (Spotlight mode)
2.5 degree aperture and "pipe" effect (beam mode)
CMY colour mixing with gradually fading colour wheels
14 special colour filters on three wheels
2 CTO filters (3200 K and 2500 K) + 1 CTB filter
wheel with 6 dichroic rotating gobos
wheel with 18 + 1 fixed metal gobos
6 jet reduction filters on the gobo wheel
Advanced Visual Effect Disc (Animation CD)
2 indexable rotating prisms (8-facet and linear 4-facet prism)
Frost filter for soft edge projection High precision dimmer and stop strobe effect
Fast and extensive pan and tilt movements
High performance electronics and firmware
Art-Net / RDM Patented motion Italian design

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=720&productgroup=5&productgroupmain=1

CLAY PAKY A.leda B-eye K20

CLAY PAKY

The Clay Paky A.leda B-EYE has redefined the term versatility. This LED spotlight can be used as a wash light as well as a beam light. Used like a washlight, the B-EYE convinces with brilliant colours, an impressive zoom range of 6°-60° and an extremely homogeneous illumination. A CTO channel is also available for individual adjustment of the colour temperature. In addition, the digital, rotatable and indexable beam shaper (e.g. ovalizer) allows the shape of the beam to be adjusted to illuminate specific stage areas. The beam of the B-EYE can be designed in different ways, for example to create mid-air effects. Besides a clearly defined beam with a 4° beam angle, virtual gobos are used to actively change the beam. As a special feature, motion can individually adjust the colours of the gobos and their background, so that multi-coloured projections are also possible. Another special feature of the B-EYE is that individual, clearly defined beams can be displayed per LED. This is made possible by the new optics of the B-EYE. In addition, all LEDs can be controlled individually and thus be used for unique effects in the beam. With the B-EYE K20, kaleidoscope-like effects can also be projected due to its rotatable and indexable front lens, and impressive direct-view and beam effects are also possible. Features Individually controllable LEDs Digital beam shaper (e.g. ovalizer) Narrow beam of very dense, parallel single beams Virtual gobos for impressive effects Individually adjustable colours for gobos Impressive 4°-60° zoom (wash 6°-60°) Brilliant colours Uniform illumination Variable colour temperature for white and all colours Rotatable front lens for kaleidoscopic and beam effects Technical data Colour: black Operating voltage/ supply voltage: 100-240V Mains frequency: 60Hz, 50Hz Power: 750VA Power of the illuminant: 37 x 15W RGBW Beam angle/zoom: 4°-60° average lamp life: 50.000 h Number of circles/channels: Standard: 21, Shape: 32, Extended: 169 Pan/Tilt: 540° / 210° IP classification: IP20 Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=309&productgroup=5&productgroupmain=1 Translated with www.DeepL.com/Translator (free version)

Den Begriff der Vielseitigkeit hat der Clay Paky A.leda B-EYE neu definiert. So lässt sich dieser LED-Scheinwerfer, sowohl als Wash- als auch als Beam Light verwenden. Eingesetzt wie ein Washlight überzeugt der B-EYE mit brillanten Farben, einem eindrucksvollen Zoom-Bereich von 6°-60° sowie einer äußerst homogenen Ausleuchtung. Zudem steht ein CTO-Kanal für die individuelle Einstellung der Farbtemperatur zur Verfügung. Darüber hinaus lässt sich mit dem digitalen, rotier- und indexierbaren Beam-Shaper (z.B. Ovalizer) die Form des Beams anpassen, um gezielt Bühnenbereiche auszuleuchten. Der Beam des B-EYE kann auf unterschiedliche Weise gestaltet werden, um zum Beispiel Mid-Air-Effekte zu erzeugen. Neben einem klar definierten Beam mit 4° Abstrahlwinkel dienen virtuelle Gobos dazu, den Beam aktiv zu verändern. Als Besonderheit lassen sich motion die Farben der Gobos und deren Hintergrund individuell anpassen, so dass auch mehrfarbige Projektionen realisierbar sind. Zu den Besonderheiten des B-EYE gehört auch, dass einzelne, klar definierte Beams pro LED darstellbar sind. Dies wird durch die neue Optik des B-EYE ermöglicht. Darüber hinaus lassen sich alle LEDs einzeln ansteuern und so für einzigartige Effekte im Beam nutzen. Mit dem B-EYE K20 sind aufgrund seiner rotier- und indexierbaren Frontlinse zusätzlich noch kaleidoskopähnliche Effekte projizierbar sowie auch eindrucksvolle Direct-View- und Beam-Effekte möglich. Features Einzelansteuerbare LEDs Digitaler Beam-Shaper (z.B.Ovalizer) Eng abstrahlender Beam aus sehr dichten, parallelen Einzel-Beams Virtuelle Gobos für beeindruckende Effekte Individuell anpassbare Farben bei Gobos Eindrucksvoller 4°-60° Zoom (Wash 6°-60°) Brillante Farben Gleichmäßige Ausleuchtung Variable Farbtemperatur für Weiß und alle Farben Rotierbare Frontlinse für Kaleidoskop- und Beam-Effekte Technische Daten Farbe: schwarz Betriebsspannung/ Versorgungsspannung: 100-240V Netzfrequenz: 60Hz, 50Hz Leistung: 750VA Leistung des Leuchtmittels: 37 x 15W RGBW Abstrahlwinkel/Zoom: 4°-60° mittl. Leuchtmittel-Lebensdauer: 50.000 h Kreis-/Kanal-Anzahl: Standart: 21, Shape: 32, Extended:169 Pan/Tilt: 540° / 210° IP-Klassifizierung: IP20 Quelle : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=309&productgroup=5&productgroupmain=1

CLAY PAKY A.leda B-EYE K10

CLAY PAKY

- Individually controllable LEDs - Digital beam shaper (e.g. ovalizer) - Narrow beam of very dense, parallel single beams - Virtual gobos for impressive effects - Customizable colors for gobos - Impressive 4° to 60° zoom (Wash 6° to 60°) - Uniform illumination - Variable colour temperature for white and all colours - Rotatable front lens for kaleidoscope and beam effects Technical data: Operating voltage/ supply voltage 100-240V Mains frequency 60Hz, 50Hz Output 450VA Lamp output 19 x 15W RGBW Colour temperature 2,500-8,000K Electronic ballast Beam angle/zoom 4°-60° Average lamp life 50,000 h Connectors input side XLR5, etherCON, powerCON Connectors output side XLR5 Circuit/channel count Standard: 21/ Shape: 35 / Extended: 96 Pan/Tilt 540°/210° Dimensions 358 x 253 x 423mm Weight (without packaging) 14.5kg IP rating IP20 Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=834&productgroup=5&productgroupmain=1