ROBE Robin Esprite for rent or hire

ROBE Art. no. 30852

The new, intelligent LED headlamp Esprite™ has a low-cost LED white light source that can be quickly changed or replaced. ROBE thus offers "THE solution" to the biggest problem of white LED engines, their massive and unstoppable changes in colour temperature and brightness during their service life. The ROBE Esprite™ is the uncompromising replacement for ageing 1000 W and 1200 W discharge lamp headlamps. It impresses with 27,000 lumen light output and generates a powerful 85,000 lux at 5m. The precision optics known from ROBE, which produce crystal clear, white light, also contribute to this.

Light source
Light source type: TE™ 650W replaceable white light LED engine
Life expectancy of the LED: min. 20,000 hours
CRI: 70/80/90, selectable via DMX
Color temperature: 6,700K

OPTICAL SYSTEM
Robe's proprietary optical design
Highly efficient optical zoom system, ratio 9:1
Zoom range: 5.5° - 50°
diameter of the exit lens: 150 mm
Optics made of highly efficient components
Light output in lumen: up to 27,000 lm
Brightness: 85.000 lx @ 5m

DYNAMIC EFFECTS
Cyan: 0 - 100%
Magenta: 0 - 100%
Yellow: 0 - 100%
Variable color temperature (CTO): 3,000K - 6,700K
Color wheel 1: 5 solid dichroic colors + white
Color wheel 2: 5 solid dichroic colors + white
Orifice slider module: 4 individually positionable sliders plus positioning of the entire module +/-60° (patented)
Rotatable gobo wheel: 7 rotatable, indexable and interchangeable breakup and aerial gobos + open, patented "SLOT&LOCK" system
Static gobo wheel: 9 static and exchangeable gobos + open
Animation wheel: made of aluminium, for single use or in combination with gobos, rotatable in both directions with variable speed
Prism: 6-fold prism, rotatable in both directions with variable speed
Iris: motorized, stepless, pulse effects up to 3 Hz Frost: light 1° frost for soft focus of the gobo projection or the iris sliders and a medium 5° frost for a uniform wash hot-spot function: from a homogeneous beam to a hot-spot beam with a ratio of 6: 1 changeable Motorized zoom and focus Electronic strobe effect with variable speed up to 20 Hz High resolution electronic dimming: 0 - 100% L3™ (Low Light Linearity) - 18 bit dimming without noticeable steps for ultra-fine dimming up to blackout Cpulse™: Pulse Width Modulation (PWM) control for flicker-free light, for example for HD and UHD cameras; ready for 8K and 16K

CONTROL AND PROGRAMMING
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe Touchscreen with battery buffer, gravity sensor for automatic screen alignment
Operating memory Service log with RTC
Stand-alone operation with 3 editable programs (with up to 100 steps each)
Integrated error analysis for fast error detection
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN
CRMX™ wireless technology from Lumen Radio (optional)
DMX protocol modes: 2 Number of control channels: 49, 42
Pan/Tilt: resolution 16 Bit
CMY color mixing & variable CTO: resolution 8 bit
Color wheel positioning: resolution 8 or 16 bit
Aperture slider module motion & rotation: resolution 8 bit
Positioning rotatable gobo wheel: Resolution 8 Bit
Gobo indexing & rotation: resolution 8 or 16 bit
Positioning static gobo wheel: Resolution 8 Bit
Animation wheel: resolution 8 Bit
Rotation animation wheel: resolution 8 Bit
Iris: resolution 8 or 16 bit
Frost: Resolution 8 Bit
Zoom: resolution 8 or 16 bit
Focus: Resolution 8 or 16 bit
Dimmer: Resolution 8 or 16 bit (internal 18 bit)

MOVEMENT
Pan movement: 540°
Tilt movement: 265°
Motion control: standard and reduced speed
EMS™: Electronic Stabilizer System for Pan & Tilt to reduce light beam deviations caused by crosshead movement or vibration
Automatic Pan/Tilt position correction

ROTATABLE GOBOS
7x rotatable glass gobos
Outer diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Maximum thickness: 4 mm
High temperature borofloat or better glass

STATIC GOBOS
9x static glass gobos
Outside diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Max. thickness: 3.5 mm
Heat resistant borofloat or better glass

EFFECTRADE
Single animation wheel
Material: Aluminium
Can be used individually or in combination with the rotating gobos
Rotatable in both directions with variable speed

FRAMING SHUTTER SYSTEM
Blades: 4 blades, each individually movable in its position and rotation
Movement: stepless with variable speed
Stepless and very precise movement of the framing shutter system
Rotation: +/- 60° of the complete orifice plate module

THERMAL SPECIFICATIONS
Maximum ambient temperature: 45°C (113°F)
Maximum case temperature: 75°C (167°F)
Minimum operating temperature: -5°C (23°F)

ELECTRICAL SPECIFICATIONS AND CONNECTORS
Power supply: Electronic with automatic range selection
Supply voltage: 100-240V, 50/60 Hz
Power consumption: Standard mode: Max. 870W at 230 V / 50 Hz
High-Power-Mode: Max. 950W at 230 V / 50 Hz
Power connector: Neutrik powerCON TRUE1 in
DMX and RDM data: lockable 3-pin & 5-pin XLR in/out
Network interface: RJ45 in

RELEASES
CE conformity
cETLus match

MECHANICAL SPECIFICATIONS
Height: 733 mm (28.6") - head in vertical position
Width: 443 mm (17.4")
Depth: 264 mm (10.4") - head in vertical position
Weight: 27.8 kg (61.3 lbs) IP protection class: IP20

EFFECTS Effects:
Static and rotating gobo wheel, animation wheel, aperture slider, prism

Source : https://motion-rental.de/veranstaltungstechnik-verleih.html?productid=1509&productgroup=5&productgroupmain=1

Categories Lights (236)